Tender For Provision Of Esr Inside 4.0Mld, Wtp, Dharmagarh Under 15Th Fc Tied Grant For The Fy 202223
Tender Value
79.67 Lakhs
Estimated cost
Bid Submission
25 Nov 2022
0 days left
EMD
79678
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharamgarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Esr Inside 4.0Mld, Wtp, Dharmagarh Under 15Th Fc Tied Grant For The Fy 202223
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Nov-2022 | CORRIGENDUM NOTICE NO 01 | Other | 25-Nov-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | A.Construction of2.50Lakh liter Capacity 1Nos. ESR with ancilaries works |
| 2 | Soil Testing, Design,Drawing,Construction, Testing & commissioningof 2.5 Lakh liter Capacity RCC Elevated Storage Reservoir of20m staging height with piping arrangement of ESR up to 5 Mtr from external face. , including provision of Lightning arrester, Ladder & all required provisions complete as per direction of engg-in-charge , all complete. Kebidi WTP |
| 3 | B.Laying of distribution pipe lines from ESR to main branchat Kebidi Chowk. |
| 4 | Supplying all labour and T & P etc. and earthwork in excavation for foundation trenches in all kinds of soilincluding dressing & levelling the bed within initial lead and lift and as directed by the Engineer-in-charge all complete. |
| 5 | Supplying all materials, labour andT & P etc. and laying in trenches, centrifugally Ductile(spun) Iron pressure pipes conforming to I.S : 1536 of the following nominal diameter and Class as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. |
| 6 | 200mm dia D.I. Class-K-7 pipe |
| 7 | 200mm dia D.I. Class-K-9 pipe |
| 8 | Supplying all materials, labour and T & P etc. and laying in trenches double socket Cast Iron bends, fittings and specials conforming to I.S : 1538 of the following sizes as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. |
| 9 | Supplying all materials, labour and T & P etc. and fixing Cast Iron Sluice Valve with double flanged ends & cost of Nut, Bolt, Rubber insertion etc. for water works purposes for the following rating and nominal diameter as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. |
| 10 | 200 mm dia. CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000) |
| 11 | Supplying all materials, labour and T & P etc. and making Tyton joint using rubber rings to spun iron Cast Iron pipes and fittings of the following nominal diameter including testing of the joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. |
| 12 | 200mm dia. Rubber Tyton joint |
| 13 | 200mm dia. Rubber Tyton joint |
| 14 | Supplying all labour and T&P etc. and filling in pipe line trenches with the excavated earth, well watered & rammed as per specification and as directed by the Engineer-in-charge, all complete. |
| 15 | Supplying all materials, labour andT & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation, lean cement concrete (1:3:6) of 150mm thick, well burnt Clamp Burnt brick masonry in cement mortar (1:3) of 250mm thick wall in foundation and plinth, 12mm thick cement plaster (1:3) inside and outside, 100mm thick cover slab in M-20 R.C.C. (1:1½:3) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. |
| 16 | Sluice ValveChambersofinsidesize1.0mx1.0mx1.50m |
| 17 | Supplying all materials, labour and T & P etc. and including spirally welded M.S pipes and offsets of specified diameter M.S. blank flange, painting the inside and outside surface of pipe with two coats of food grade black anti-corrosive paint of approved make as per I.S. specification with all lead and other taxes etc. including conveying of pipes and the specials and lowering at the trenches on proper bedding and jointing / welding with 3 runs of arc welding including supply of all jointing materials, welding rod, oxyacetylene gas, power supply for fabrication of specials at site with standby arrangement of diesel generator set and dewatering the pipe line etc. shoring and shuttering, barricading and inter-connection of M.S pipe with C.I pipe as per site condition and as per P.H. specification and direction of Engineer-In-Charge, including transportation of all materials to site, all complete. |
| 18 | MS Pipe cost |
| 19 | 200mm dia. (7mm thick) |
| 20 | MS pipe cutting |
| 21 | MS pipe welding |
| 22 | Providing Flanged joints conforming to IS:3114-1994toFlanged Cast Ironpipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nutsand rubber insertions as per specification and direction of the Engineer-in-charge, all complete. |
| 23 | 200mm dia. |
| 24 | Cost of materials |
| 25 | Cost of fittings |
| 26 | 200mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC) |
| 27 | Cost of MS Flanges |
| 28 | 200mm dia. MS Flangewith 8 holes- 12mm thick MS plate |
| 29 | Supply of ISI Marked Centrifugally Cast (Spun) DuctileIron (K-7 & K-9)Socket & SpigotPressurePipesin standard length with inside cement mortar liningandexternalbituminouscoating conformingtoIS8329:2000andits subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes, local delivery at site. The rates are inclusive of cost of all materials, , Inspection Charges, Insurance Charges, packing & forwarding charges, cost of transportation-handing- loading-unloading-stacking atsites, etc., all complete but excluding GST.(Cost of rubber gaskets shall be inclusive in the cost of pipes of different diameters.) |
| 30 | 200mm dia. DI Class - K-7 Pipe |
| 31 | 200mm dia. DI Class - K-9 Pipe |
AI Tender Summary
Tender Timeline
Nov 19, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 28, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender