Tender For Construction Of Additional Class Room For Upgradation Of Kangapada As Under Phiringia Block.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
29 Nov 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Phulabani → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Additional Class Room For Upgradation Of Kangapada As Under Phiringia Block.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of Hard soil in foundation within 50m. initial lead and 1.50m. initial lift including rough dressing and breaking the clods to maximum 5cm. to 7cm. laying layers not exceeding 0.30m. in depth and as perdirection of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with sand including watering and ramming including cost, conveyance and royality and taxes of all materials and labour with T&P required for thework etc. complete as per specification and direction of Engineer-in-Charge. |
| 3 | Cement concrete in (1:4:8) using 40mm size Hard Granite hand Broken metal including watering and curing,cost,conveyance, taxes and royalties of all materials and labour with T&P required for the work etccomplete and as per specification and direction of Engineer in Charge. |
| 4 | Rigid smooth centering and shuttering for Mass concrete including dismantling them after csting including all cost, conveyance, taxes of materials and labour with T&P required for the work etc. |
| 5 | RCC work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips incuding watering and curing etc. complete as per direction of Engineer-in charge. |
| 6 | a) Columns Footing |
| 7 | b) Plinth Beam |
| 8 | c) Columns |
| 9 | d) Lintel Bend |
| 10 | e) Chajja |
| 11 | f) Roof Beam |
| 12 | g) Roof slab |
| 13 | Supplying, fitting and placing uncoated HYSD bars reinforcement tying the grills, straighten placing them in position including cost of bindings wire 18 to 20mm gauge including cost of HYSD bar with conveyance and royalty etc. complete and as per technical specification and direction of Engineer-in charge. |
| 14 | Fly ash Brick Masonry in C.M. (1:6) in Superstructure using 23cm x 11cm x 8cm size fly ash Brickincluding watering and curing,cost, conveyance,taxes and royalties and labour require for the work etc complete. |
| 15 | 12mm thick Cement Plaster in C.M. (1:6) over brick work including watering and curing,cost, conveyance,taxes and royalties and labourwith required for the work etc complete. |
| 16 | 16mm thick Cement Plaster in C.M. (1:6) over brick work including watering and curing,cost, conveyance,taxes and royalties and labourwith required for the work etc complete. |
| 17 | 2.5cm (1\") thick Grading Concrete in C.C. (1:2:2) over roof slab using 6.70mm sie H.G. Chips including watering,cost, conveyance,taxes and royalties and labour required for the work etc complete. |
| 18 | Supplying, Fitting and Fixing of Vitrifiedtiles in floors tread or steps and landing of size 600mmx600mm of approved make conforming to IS:13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. |
| 19 | Manufacturing and Supplyingof M.S. Doors, windows,grills, vantilotors , collarseble gate and doors frame with pannel shuter made out of structural steel plates and bars conferming to IS spesification as per drawing, design, including with all cost, laour, T&P etc complete as per direction of Engineer-in-charge. |
| 20 | Weathering two coatwith any approved Weather coaton new workafter scraping and cleaning the surface over one coat of water bound wall primer including watering and curring all cost of materials, scaffolding, labour with T&P etc. complete as per direction of Engineer-in-charge. |
| 21 | Distempering two coatwith any approved distemperon new workafter scraping and cleaning the surface over one coat of water bound wall primer including watering and curring all cost of materials, scaffolding, labour with T&P etc. complete as per direction of Engineer-in-charge. |
| 22 | Painting Two coats Enamel Paint with any approved shade on Doors & windowsincluding all cost, conveyance,tax of materials and labour with T&P required for the work etc complete. |
| 23 | Provision of black board |
| 24 | Internal electrification |
| 25 | Recessed wiring to Light points/Ehause Fanpoint with 1.5sqmm 2F.R.PVC insulated Single core Multistand copper conductor of ISI mark with 20mm dia non-metallic PVC flexible conduit with 5Amp.250V.piano type swith ISI marked on MS box havingfront & ceiling rose ISI marked mounted Bakelite cover of suitable size, MS box with 1.0sq mm FR.PVC insulated single core multistrandcopper conductor and earth wire including all accessorie and connection as per direction of engineer in charge (Make of wire Finollex/L&T/Anchor/Havels/v-gUARD)deducting the cost of S/F of 100mm x 100mm x 60mm MS box with bakelite cover-1no ) (1.2 SOR-2010) |
| 26 | a) Group-A (1.2.1-1.24.2) |
| 27 | b) Group-B (1.2.2-1.24.2) |
| 28 | c) Group-C (1.2.3-1.24.2) |
| 29 | Recessed wiring to Fan in |
| 30 | a) Group-B (1.2.2-1.24.2) |
| 31 | b) Group-C (1.2.3-1.24.2) |
| 32 | S/F of Angle holder replacing Ceiling Rose |
| 33 | S/F of 5A switch & 5A socket out let of ISI marked on existing board (1.25.1+1.25.4) |
| 34 | S/F of Power point withMetal box of 180mm x 100mm x 60mm deep (normal size) in recess with suitable size of phenplic laminated sheet cover in front including providing and fixing 5pin 15/16 amp piano type swithch, connection, painting etc as required (1.27) |
| 35 | S/F of 16/18 SWG metal box of following sizes (Nominal size) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 36 | a) 100mm x 100mm x 60mm deep (1.24.2) |
| 37 | b) 200mm x 150mm x 75mm deep (1.24.8) |
| 38 | Wiring for Circuit/Sub main wiring along with earthing with the following size of PVC flexible of PVC insulated single core. Multistrand copper Conductor of ISI marked conferming to IS-694/1990 in 20mm dia steel Conduit in surface/recessed PVC conduit as required (Make of wire -Finolex/Anchor/Havels/V-Guard) |
| 39 | a) 2x1.50+1x1.0 (1.8.1) |
| 40 | b) 2x2.50+1x1.5 (1.8.2) |
| 41 | c) 2x4.00+1x1.5 (1.8.3) |
| 42 | Supply, Intallation testing & commissioning of Main Switches(IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C. fuse links, inter connections earthing etc as required as per direction of Engineer In-chage (Make-Seimens/HPL/Anchor/L&T/Havels/C&S/R,K) |
| 43 | a) S/F of MCB 4way single door (1.3.2)(a) |
| 44 | Earthhing with G.I earth pipe 3mtr long 40mm dia ISI marked icluding accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 45 | Supplying & laying 6 SWG G.I. wire in recess for loop eathing as required (3.17) |
| 46 | S/F of 18-25Watt L.E.D Tube light itting with all accessories and connections (make:HPL-Neptune Havels-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 47 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (make:Usha-Strker Millenium/Crompton-Jura/Ancho-XL/Havels-Velocity/Spark/Orient-Summerpride) |
| 48 | S/F step type fan regulator |
| 49 | Supply & fixing of 45-48 Watt single L.E.D street light fitting with LED & Electronic driver including all accessories and connectios (make:Crompton/Phillips/HPL/Polycab/Havells |
| 50 | S/F of electronic 12 Watt LEDD Bulb |
| 51 | S/F of 6 sqmm twin core unbonded aluminium service connection wire with no. 10 G.I. Guard wire for support for service connection with G.I. Hook. |
| 52 | Supply & fixing of 32 amp main switch |
AI Tender Summary
Tender Timeline
Nov 19, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 29, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender