Tender For Provision Of Octagonal Poles With L.E.D Street Light From Ikhlashpura To Maharana Pratap Chowk (1.8 Km) At Orai District Jalaun.
Tender Value
64.62 Lakhs
Estimated cost
Bid Submission
09 Dec 2022
0 days left
EMD
5.23 Lakhs
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
orai → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Octagonal Poles With L.E.D Street Light From Ikhlashpura To Maharana Pratap Chowk (1.8 Km) At Orai District Jalaun.
BOQ
| Sl. No. | Item Description |
| 1 | work |
| 2 | Supply & fixing of 10 mtr GI Octagonal Pole ofapproved make (top dia 100 mm, Bottom dia 200 mmand base plate 16mm thick) having 3 mm thikness withDouble arm bracket 1 Mtr length in 1:2:4 RCCfoundation bolt including the cost of foundation,excavation & back filling and Required T&P completeein all respect. |
| 3 | S/Laying of 16 sqmm4 core aluminium conductor PVC insulated Armoured served sheated cables 1100 V grade at a depth of 750 mm below ground level complete in all respect |
| 4 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. CAT- AAA |
| 5 | S/F of 01 No. 2.5 sqmm 3 Core PVC insulated Copper conductor cable complete in all respects. |
| 6 | Supply and fixing 40 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. |
| 7 | Supply & Erracetion of32 Amp. MCCB-3 Nos. Cat. B. Pannel Cubicle Typefactory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB\"s (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB\"s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. |
| 8 | Supply and burrying of 75 mm Dia 3 Mtrs. Long Electrode casted with maintenance free, conductive concrete, non corrosive mixture ( Ultra low Resistive carbon 0.001 ohm/Mtr) in the ratio of 3:1:1 (marconite : cement : water) on M.S. Rod wiih hole (16 mm diameter X3 Mtrs ) will be vertically installed for earthing with 1 Mtr G.I strip (25 mm X 2.5mm) connected with SS nut bolt. The earth electrode will be installed into the 100 mm pit up to 3000 mm depth. noraml soil will be used as backfill material. Make : As approved in U.P.P.W.D & C.P.R.I. Certified. |
| 9 | Supply and laying of 63 mm dia DWC HDPE Pipe ISI Marked along with all accessories like socket , bend , coupler etc confirming to IS 14930 , Part II Complete with fitting and cutting , jointing etc direct in ground ( 75 cm below ground level ) including Excavation and refilling the trench but exclusing sand Cushioning and protective coverinng etc complete as required |
| 10 | Supply and fixing of 16 sq. mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. |
| 11 | Numbering of pole As per direction of Engineer In Charge |
| 12 | Supply & fixing of Radium Strip Red and white on 10 Mtr Pole |
AI Tender Summary
Tender Timeline
Nov 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender