Tender For Miscellaneous Civil And Painting Work In Thdc Officers Field Hostel Building At Ntt.
Tender Value
17.49 Lakhs
Estimated cost
Bid Submission
10 Dec 2022
0 days left
EMD
17500
Bank guarantee accepted
Document Fee
1298
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tehri → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Miscellaneous Civil And Painting Work In Thdc Officers Field Hostel Building At Ntt. => Limited
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 moutside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including gettingout the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 3 | Disposal of dismanteld material lead up to 5Km by Mechanical transport. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinthlevel |
| 5 | C C 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal sizederived from natural sources) |
| 6 | C C 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) |
| 7 | R.C.C (1:1.5:3) |
| 8 | Mild steel work in R.C.C(1:1.5:3) |
| 9 | Form work in R.C.C(1:1.5:3) |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor level in all shapesand sizes in : |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 12 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 13 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 14 | With cement mortar 1:4 |
| 15 | Distempering with 1st quality washable distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand andmanufacture to give an even shade : |
| 16 | Old work (one or more coats) |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 18 | One or more coats on old work |
| 19 | Two or more coats on new work |
| 20 | Finishing walls with textured exterior paint of required shade : |
| 21 | Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. |
| 22 | Old work (One or more coats) applied @ 1.82 ltr/10 sqm. |
| 23 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 24 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 25 | Area 3 sq. metres and below |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 27 | Sal wood |
| 28 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 29 | 1 Second class teak wood |
| 30 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 31 | 30 mm thick |
| 32 | Providing and fixing ISI marked flush door shutters conforming to IS 2202 (Part I) non-decorative type, core of block board construction with faces of shutters:frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both |
| 33 | 30 mm thick including ISI marked Stainless Steel butt hinges |
| 34 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 35 | 20 mm dia (heavy type) |
| 36 | Renewing glass panes, with wooden fillets wherever necessary |
| 37 | glass panes of nominal thickness 4 mm |
| 38 | S/F of floor tile size 300X300 mm laid with 1:3 cement, c.sand finished with white cement sullury jointing and polishing complete i/c supply of all materials,labours,T&P required etc. |
| 39 | S/F of glazed TILE size 300mmX450mm on wall/skirting /Dedo laid with 1:3 cement, c.sand finished with white cement sullury jointing and polishing complete i/c supply of all materials,labours,T&P required etc. |
| 40 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge |
| 41 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complet |
| 42 | 40 mm thick with 20 mm nominal size stone aggregate |
| 43 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 44 | Orissa pattern W.C. pan of size 580x440 mm |
| 45 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 46 | Pro/Fix. Get for WC |
| 47 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 48 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 49 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 50 | 15 mm nominal bore |
| 51 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 52 | 32 mm dia |
| 53 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete |
| 54 | 10 litre capacity - White |
| 55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 56 | 610x460 mm bowl depth 200 mm |
| 57 | Providing and fixing whiteseat cover for European type water closet pan. |
| 58 | Providing and fixing Double equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 59 | 100x100x100 mm |
| 60 | 2 75x75x75 mm |
| 61 | Providing and fixing single equal plain junction of required degree : |
| 62 | 100x100x100 mm |
| 63 | 75x75x75 mm |
| 64 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc |
| 65 | 15 mm dia nominal bore metre |
| 66 | 20 mm dia nominal bore |
| 67 | 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 68 | 20 mm dia nominal bore |
| 69 | Providing and fixing gun metal gate valve with C.I. wheel of approved |
| 70 | 20 mm nominal bore |
| 71 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting andthreading the pipe and making long screws, includinggood the same complete wherever required : |
| 72 | 15 mm nominal bore |
| 73 | 20 mm nominal bore |
| 74 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 75 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 76 | 15 mm nominal bore |
| 77 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 78 | 15 mm nominal bore |
| 79 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore |
| 80 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 81 | S/Fixing of PVC Conection i/c all cost of materials,labours, |
| 82 | S/Fixing of C.P jali i/c all cost of materials,labours, |
| 83 | Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required. |
| 84 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete i/c material |
| 85 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre |
| 86 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration metre |
| 87 | S/F PVC nahani trap including all cost of materials ,labours & T7P etc. |
| 88 | S/F ofPVC pipe including all cost of materials , labours & T&P etc. required for S/F ofPVC pipe including all cost of materials , labours & T&P etc. required for |
| 89 | (a)110 mm dia |
| 90 | (b)75 mm dia |
| 91 | S/F of PVC plain bend including all cost of materials , labours & T&P etc. required for proper completion of work. |
| 92 | (a)110 mm dia |
| 93 | (b)75 mm dia |
| 94 | Supply and Fixing of Door and Window fittings I/c all cost of labours,T&P and materials etc. (A) Oxidized Iron Fittings :- |
| 95 | (a) T.Bolt size -250x10mm :- |
| 96 | (b) T.Bolt size -150x10mm :- |
| 97 | (c) L-DROP size -10\":- |
| 98 | (d) Handle size -6\":- |
| 99 | (e) Handle size -4\":- |
| 100 | (d)DOOR STOPPER (Brass,Twin Rubber) |
| 101 | S/FixingHYDROLIC DOOR CLOSER I/c |
| 102 | cost of all materials,labours and T&P etc. |
| 103 | Constructing brick masonry manhole |
| 104 | P/F GPI Plain sheetover door/window etc. /C cost of materials, labours and T&P etc. required for proper completion of the work.(0.63 mm thik GPI Shet) |
| 105 | Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per direction of Engineer - in - charge.15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalen |
| 106 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 107 | Supply & finishing waal with Birla puty doublecoat i/csupply of all materials,labour,T&P required for proper completion of the work. |
| 108 | NOTE: Excluding GST & EPF/ESI (On employer part) |
AI Tender Summary
Tender Timeline
Nov 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender