|
| 1 | Code No.14.1.1Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4fine sand) |
| 2 | Code No. 6.4.2Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 3 | Non PSR Providing, cutting & fixing to required shape and design 19mm thick plywood (BWR) for cupboard shutters/ table top/ bottom/sides/ partitions and the like. The rate is inclusive of cost of materials, wastages, screws, nails, fevicol, SH, special labour charges and finishing the surface neat after fixing in required position as directed by the Engineer-in-charge(PWD approved vide Lr.No.353/PW/SE-I/W/AE(P)-II/F.No.221/11-12, dt.14.11.2011) |
| 4 | Code No. 10.25.2Steel work welded in built up sections /framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required – in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 5 | Code No.13.8.312 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) |
| 6 | Code No.13.9.2A15 mm cement plaster on the rough side of single or half brick wall of mix 1:5 (1cement : 5 fine sand) |
| 7 | Code No.13.50.1Applying priming coat - with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 8 | Code No.14.46 Removing dry or oil bound distemper, water roofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete |
| 9 | Code No.13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work |
| 10 | Code No.14.54.1Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work |
| 11 | Code No.14.66.1Finishing walls with acrylic smooth exterior paint of required shade - old work (two or more coats applied @1.67 ltr / 10 sqm) on existing cement paint surface |
| 12 | Code No.14.66.2Finishing walls with acrylic smooth exterior paint of required shade - old work (one or more coat applied @ 0.90 ltr / 10 sqm) |
