Tender For Sanitary Work For Two Bed Room Hut At Kathdaji -Mawar /Nowgam Kupwara
Tender Value
1.60 Lakhs
Estimated cost
Bid Submission
23 Nov 2022
0 days left
EMD
4800
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nowgam → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Sanitary Work For Two Bed Room Hut At Kathdaji -Mawar /Nowgam Kupwara
BOQ
| Sl. No. | Item Description |
| 1 | Particulars |
| 2 | Providing and fixing wash basin with C I./M.S. brackets, 15mm C.P. brass(pillar taps, 32 mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls whereverrequired White Vitreous China Wash (basin size 630x450 mm with a pair of15 mm C.P. brass pillar taps ( STANDARD QUALITY OF MAKEHINDWARE, CERA OR LIKE |
| 3 | Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the 2.0 reception of pipes and fittingsSTANDARD QUALITY OF MAKE PARKO, JAGUAR OR LIKE |
| 4 | Providing and fixing white vitreous china pedestal typewater closet(European type W.C .pan) with seat and lid, 10 litre low level white P.V.C.flushing cisternincludingflush pipe with manually controlleddevice (handle lever)conforming to 3.0 (IS:7231, with all fittings andfixtures, complete including cutting and making good the wallsand floorswherever requied W.C. pan with ISI marked white solid plastic seat and lidSTANDARD QUALITY OF MAKE HINDWARE, CERA OR LIKE |
| 5 | Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern(including flush pipe (of approved make) \"manually contro(led device (handlelever) conforming to IS:7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required Orissa patternwhite vitreous china W.C. pan of size 580x440 mm with integral type footrests (STANDARD QUALITY OF MAKE HINDWARE, CERA OR LIKE |
| 6 | Providing and fixing C.P. brass long nose bib cock of approved qualityconforming to IS standards and weighing not less than 810 gms. 15mm/nominal bore ( STANDARD QUALITY OF MAKE PARKO, JAQUAR OR LIKE |
| 7 | Providing and fixing C.P. stop cock (concealed) of standard design and ofapproved make conforming to IS : 893115 mm nominal bore (STANDARD QUALITY OF MAKE PARKO, JAQUAR OR LIKE |
| 8 | Providing and fixing C.P. brass angle valve for basin mixer and gyser pointsof approved make conforming to IS : (8931 15 mm nominal bore (STANDARD QUALITY OF MAKE PARKO, JAQUAR OR LIKE |
| 9 | P/F of health faucets of approved quality |
| 10 | Providing and fixing mirror of superior glass( of approved quality) and ofrequired shape and size with plastic moulded frame of approved make andshade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 11 | Providing and fixing PTMT towel railcomplete with brackets fixed to woodencleats with CP brass screws withconcealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 (mm, 78 mm wide and effective height of 88 mm, weighing not less than190 gms. |
| 12 | Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap |
| 13 | Providing and fixing of Soap dish (C.P (brass) with bracket |
| 14 | Providing and placing on terrace (at all floor levels) polyethylene water storagetank ISI: 12701 marked indicating the IBIS License No. with cover andsuitable locking arrangement and making necessary holes for inlet, outletand overflow pipes but without fittings and the base support for tank [Sintex,Electroplast, Star, Lotus or equivalent having valid ISI license]. |
| 15 | Water geysers of 35 L capacity of standard manufacture OF APPROVED BRAND RACOLD, VENUS OR LIKE |
| 16 | Providing and fixing C.P. brass close hole basin mixer piller tap of approvedquality and make, weighing not less than 1.970 kg. ( STANDARD QUALITYOF MAKE PARKO, JAGUAR OR LIKE |
| 17 | Providing and fixing toilet paper holder C.P. brass ( STANDARD QUALITY OFMAKE PARKO, JAGUAR OR LIKE |
| 18 | Providing and fixing soil, waste and (vent pipes 100 mm dia. PVC includingall bends, tees and other fixtures or approved qualitylike Prince. Vectus or like |
| 19 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms |
| 20 | Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink asper .S. 13983 with C.. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls whereverrequired Kitchen sink without drain board 610x460mm bowl depth 200mm |
| 21 | P/F of GI pipes incl all fixtures |
| 22 | P/f of electric motor 1hp incl all wiring &conduct complete job |
| 23 | C/O water collection chamber 6 ‘ deep with RCC rings & top cover complete job |
AI Tender Summary
Tender Timeline
Nov 17, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender