Tender For Laying And Fitting Of Pipes Incl. P/F Of Pipe Fittings, Construction Of 2 No. Spring Protection Works, Const. Of 6000 Gallons Capacity Sr, Renovation Of Chowkidar Quarter, Const. Of Crate Work At Spots Wss Zrend
Tender Value
15.07 Lakhs
Estimated cost
Bid Submission
28 Nov 2022
0 days left
EMD
30140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dooru → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Laying And Fitting Of Pipes Incl. P/F Of Pipe Fittings, Construction Of 2 No. Spring Protection Works, Const. Of 6000 Gallons Capacity Sr, Renovation Of Chowkidar Quarter, Const. Of Crate Work At Spots Wss Zrend
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Nov-2022 | New SBD instructions/Extension of date | Date | 28-Nov-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | All kinds of soil |
| 3 | Ordinary Rock |
| 4 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan)including disposal of excavated earth upto 50 mtrand lift upto 1.50 mtr, as directed by Engineer-In- Charge. |
| 5 | All kinds of soil : |
| 6 | Extra for every additional lift of 1.5 m or part there of in excavation/banking excavated or stacked material. All kinds of soil. |
| 7 | Laying and fitting of G.I. pipes (all classes) complete including cost of pipes specials but excluding cost of pipes and Earth work. |
| 8 | 65 mm dia. nominal bore |
| 9 | 40 mm dia. nominal bore |
| 10 | 25 mm dia. nominal bore |
| 11 | 20 mm dia. nominal bore |
| 12 | 15mm dia. nominal bore |
| 13 | Providing and instalation of house hold connection tounconnected household including providing and fixing of necessary pipes specials,earthwork at connection and whatever necessary.complete |
| 14 | Providing and laying of dry stone solling tightly hand picked on horizontal levels |
| 15 | Providing and Hand-packing 0f quarry stones in wire-crates; excluding cost of crates But including cost ofstones. |
| 16 | Dry random rubble masonry with hard stone in foundation and plinth: With bond ston |
| 17 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 18 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 19 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 20 | Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement of mix 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 23 | 3 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 25 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete n all colours, shades, except White, Ivory, Fume Red Brown |
| 26 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1: 6( 1 cement : 6 coarse sand) |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 28 | Foundations, footings, bases of columns etc. for mass concrete. |
| 29 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 30 | Suspended floors, roofs, landings, balconies and access platforms |
| 31 | Edges of slabs and breaks in floors and walls Under 20 cm wide. |
| 32 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 33 | Extra for shuttering in circular works |
| 34 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 35 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 36 | Extra for exceeding 6mtr span |
| 37 | 12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 3 ( 1 cement : 3 fine sand |
| 38 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 39 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand) |
| 40 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above/upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 41 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 42 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete.Welded |
| 43 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 44 | 4 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 45 | Providing and fixing of M.S. eve boarding 300 mm wide and soffit boarding including priming coat of red oxide and painting with two or more coats with synthetic paints of approved and manufacture complete. |
| 46 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including priming coats of approved brand and manufacture. (wood work) |
| 47 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately)First class kail wood |
| 48 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. ecorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type |
| 49 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 50 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 52 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 53 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:- |
| 54 | 15 mm dia. nominal bore |
| 55 | 20 mm dia. nominal bore |
| 56 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :- |
| 57 | 20mm nominal bore |
| 58 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) :- |
| 59 | 15 mm nominal bore |
| 60 | 20 mm nominal bore |
| 61 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 62 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:- |
| 63 | Long pan pattern white vitreous china W.C. pan of size 580 mm. |
| 64 | Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 19.10A1 Kitchen sink with drain board |
| 65 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing:- |
| 66 | Rectangular shape 300x450 mm |
| 67 | Providing and fixing soil, waste and vent pipes : PVC type-B : |
| 68 | 100 mm dia |
| 69 | 75 mm dia |
| 70 | Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 71 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:- |
| 72 | 250x10 mm |
| 73 | 200x10 mm |
| 74 | 150x10 mm |
| 75 | 100x10 mm |
| 76 | Providing and fixing bright finished brass handles with screws etc. complete :- |
| 77 | 125 mm |
| 78 | 100 mm |
| 79 | 75 mm |
| 80 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete:- |
| 81 | 200 mm weighing not less than 240 gms. |
| 82 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 83 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 84 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 85 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 86 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 87 | 19.43 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 88 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in?charge. |
| 89 | Providing and fixing of 50 ltr capacity geysers of Venus, ReCold or equivalent including fittings, and complete job |
| 90 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :20 mm dia |
| 91 | Providing and fixing of superior quality wall to wall matting as per the direction of engineer incharge including 12 mm polystyreng fom. |
| 92 | Construction of RCC ringtype soakage pitof standardsize &6 mtr depth complete job. |
| 93 | Providing of wire crate |
| 94 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 95 | Providing and supplying of polythene sheets over boulder behind walls ioncluding fixing using wooden nails and laying of grassed soil over the same complete job. |
| 96 | Carriage of material from source to dumping site at road by mechanical transport. |
| 97 | Cement and steel for avg. lead of 15 Km |
| 98 | Sand for avg. lead of 35Km |
| 99 | 20mm Aggregate for avg. lead of 30Km |
| 100 | 40mm Aggregate for avg. lead of 30 Km |
| 101 | Stone solling For avg lead of 10 km |
| 102 | Quarry Stone For avg lead of 15 km |
| 103 | wire crate For avg lead of10 km |
| 104 | Bricks20 Km |
| 105 | Extra Carriage ofmaterial by manual labour from dumping site upto actual site of work . For an avg. distance of 1000 mtr |
| 106 | Cement |
| 107 | steel |
| 108 | Sand and 20mm agg |
| 109 | 40mm Aggregate |
| 110 | Stone solling |
| 111 | Bricks |
| 112 | Extra Carriage ofmaterial by manual labour from dumping site upto actual site of work . For an avg. distance of 1500 mtr |
| 113 | Cement and steel |
| 114 | Sand and 20mm agg. |
| 115 | 40mm Aggregate |
| 116 | Stone solling |
| 117 | Wire crate |
| 118 | quarry stone |
| 119 | Carriage ofPipes material From divisinal storeto dumping site of work by mechanical transport For anaverage lead of 15 Km including loading , unloading and stacking complete . |
| 120 | 80/65/50/40/25/20 mm dia GIpipe |
| 121 | Extra Carriage of pipes material from dumping site upto actual site of work by manual labour for avglead of 500 mtrs. |
| 122 | 80/65/50/40/25/20 mm dia GIpipe |
AI Tender Summary
Tender Timeline
Nov 23, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 28, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 29, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender