Uttar Pradesh Jal Nigam-UPJN has published Tender For Khanpur Water Supply Reorganization Scheme With Its Appurtenant Works(To Concerning Urban Local Body)In Khanpur Nagar Panchayat At District Bulandshahr,Uttar Pradesh. Submission Date for this Tender is 05-12-2022. Pipe Laying Tenders in khanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Nov-2022 | NIT corrigendum | Other | 05-12-2022 |
| 2 | 21-Nov-2022 | Rescheduling of pre bid meeting | Other | 05-12-2022 |
| Sl. No. | Item Description |
| 1 | (Construction ofRCC Overhead Tank of 1100 KL Capacity at 20 m Staging from made up level (Made Up Level of OHT will be taken as 0.70 m above from approach road level))M-30 |
| 2 | Submission of design, drawing and supply of all material, labour T&P etc. and construct as per tenderer"s own seismic proof design and drawings (approved by the department) complete Intz type tank on raft or pile cum raft foundation with columns and braces R.C.C. Over Head Tank 1100 KL capacity at 20 m staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15 cm. Providing water bar of 18mm gauge and 30 cm wide (15cm below the joint and 15cm above the joint) along the joint of cylindrical wall of over head tank at various lift. The design of the tank shall be based on safe bearing capacity of soil at site as 8 T/m2 and depth of foundation as 2.50 m from existing ground level on pile/raft foundation. Made up level of OHT will be taken as 0.70 m above approach road level. Extra earth required for made up level will be arranged by the contractor at his own cost. If the bearing capacity of soil is found less than 8 T/m2 as per testing agency report, the contractor will submit the design on the B.C. proposed by the NABL approved reputed testing agency. No extra payment will be made for this change. If the B.C. is found more than 8 T/m2 as per testing report than the design of OHT shall be done at B.C 8 T/m2 and depth 2.5m or the depth suggested by testing agency. All other details of tank not covered here shall also be as per specifications enclosed. Submission of detailed design and drawing including its vetting from any recognized Government University such as I.I.T./NIT/State Gov.Standard or equivalent status or as per direction of Engineer in-charge. R.C.C. as per approved design including fixing various pipes and ventilator top and fixing of M.S. sheet of 10 mm gauge manhole cover of 60 cm x 60 cm size with frame and locking arrangement and railing including supply of all material. Supply and fixing of M.S. ladder from inside of the tank body from roof to the bottom dome of the tank in a slope of 3: 1 (3 vertical: 1 horizontal) with railing as specified. Railing on staircase & its landings, all around balcony & top dome for access up to ventilator as specifications including supply of all material. Railing shall be provided in three rows of G.I. pipe (medium) 20mm dia. Supply and fixing of digital water level indicator along with all necessary equipments such as inverter etc. as per specifications and fixing of lightening conductor and earth plate etc. as per specifications. Testing of tank for water tightness as per specifications enclosed/ as per CPHEEO Manual including supply of water. Supply of all materials and construction of 80 mm thick R.C.C. floor, apron and 15 cm dia semi circular drain around apron in a slope towards wash out chamber with glass strips, with base concrete 1:4:8 with brick ballast of thickness 100mm. Three coats of approved quality and shade ofApex Painting of as per direction of Engineer incharge over concrete work including supply of all materials etc. Three coats of anti corrosive / aluminum / black Japan paint of approved quality on all iron work including supply of all material, labour and T&P etc. |
| 3 | Submission of detailed design and drawing from any recognized GOV. University such as I.I.T.Standard or equivalent status /any working or retired professor of I.I.Tetc. or as per direction of Engineer in-charge. |
| 4 | R.C.C. as per approved design including fixing various pipes and ventilator top and fixing of M.S. sheet of 10 mm gauge manhole cover of 60 cm x 60 cm size with frame and locking arrangement and railing including supply of all material. |
| 5 | Two column R.C.C. stair case with 1.0 m minimum clear width attached with tank body as an access to Balcony and Top Dome of tank from ground level as per design & drawing with 1.25 m high railing and gate with cabin as per specification including supply of all materials. |
| 6 | Supply and fixing of M.S. ladder from inside of the tank body from roof to the bottom dome of the tank in a slope of 3: 1 (3 vertical: 1 horizontal) with railing as specified. |
| 7 | Railing on staircase & its landings, all around balcony & top dome for access up to ventilator as specifications including supply of all material. Railing shall be provided in three rows of G.I. pipe (medium) 20mm dia. |
| 8 | Supply and fixing of digital water level indicator along with all necessary equipments such as inverter etc. as per specifications and fixing of lightening conductor and earth plate etc. as per specifications. |
| 9 | Testing of tank for water tightness as per specifications enclosed / CPHEEO Manual including supply of water. |
| 10 | Supply of all materials and construction of 80 mm thick R.C.C. floor, apron and 15 cm dia semi circular drain around apron in a slope towards wash out chamber.with base concrete 1:4:8 with brick ballast of thickness 100mm. |
| 11 | Three coats of approved quality and shade ofApex Painting of as per direction of Engineer incharge over concrete work including supply of all materials etc. |
| 12 | Three coats of anti corrosive / aluminum / black Japan paint of approved quality on all iron work including supply of all material, labour and T&P etc. |
| 13 | Supply, carting and fixing of following sizes D.I.D/F K-9 pipes with required specials such as reducers, duck foot bend etc. (bell mouth etc. in inlet) including supply of M.S.clamps, rubber insertion sheet, nut bolts,washer etc. complete as per specifications |
| 14 | 250 mm dia in inlet |
| 15 | 300 mm dia in outlet |
| 16 | 300 mm dia in over flow |
| 17 | 100 mm dia in wash out |
| 18 | Supplying and fixing of following sizes C.I. D/F sluice valves kirloskar make as per relevant latest I.S. specifications at below ground level or as per direction of E/I including supply of all jointing and other make materials such as rubber insertion sheet, nut bolts, washer etc, complete as per Specifications. |
| 19 | 250 mm dia in inlet |
| 20 | 300 mm dia in outlet |
| 21 | 300 mm dia in over flow |
| 22 | 100 mm dia in wash out |
| 23 | The words U.P. Jal Nigam, year of construction, capacity of O.H.T. with staging and slogan approved by Engineer in charge shall be painted prominently in Block Letters not less than 30 cm. in height. Maintenance till handing over and defect liability period will be 12 months after handing over to NagarPanchayat Khanpur. including supply of all materials, labour, T&P etc. complete in all respect. |
| 24 | SCHEDULE G-2 (Construction of Pump House cum Chloronome, staff quarter and boundary wall ,recharge unit and development works) |
| 25 | Excavation in foundation in ordinary soil (loam,clay or sand) including lift up to 1.50 m & lead up to 50 m,refilling,watering and ramming of evcavated earth into the trenches or space betwwen the building and sides of foundation trenches or into the plinth and disposal of surplus earth any distance inside nagar panchayat boundary as per site engineer instructions. |
| 26 | Concrete with 40 mm gauge brick ballast,local sand and cement in proportion in 12:6:1 in foundation including supply of all material,labour T & P etc. required for proper completion of work. |
| 27 | Ist. Class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all material,labour T & P etc. required for proper completion of work. |
| 28 | 20 mm thick D.P.C.with cement and approved coarse sand 1:2 including 5% water proofing material or in proportion as specied by the manufactures including supply of all material,labour T & P etc. required for proper completion of work. |
| 29 | Ist. Class brick work in 1:6 cement and coarse sand mortar in super structure including supply of all material,labour T & P etc. required for proper completion of work. |
| 30 | Ist. Class brick work in 1:4 cement and coarse sand mortar in super structure in half brick thick wall including supply of all material,labour T & P etc. required for proper completion of work. |
| 31 | Supply and fixing of M.S. angle iron chaukhats of 40 mm x 40 mm x 5 mm with 20 gauge M.S. sheet door shutter including simple moulding straight work as in chaukhats and also supply of all material,labour T & P etc. required for proper completion of work. |
| 32 | R.C.C. work with cement,coarse sand and 20 mm gauge approved stone ballast in proportion of 1:1.5:3 in sun shed and lintel on doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.50 mm thick binding wire and the cost of binding wire and including necessary centering and shuttering supply of all material,labour T & P etc. required for proper completion of work. |
| 33 | R.C.C. work with cement,coarse sand and 20 mm gauge approved stone ballast in proportion of 1:1.50:3 in slabs and lintalexcluding supply of reinforcement and its bending but including its fixing and binding the same with 0.50 mm thick binding wire and the cost of binding wire and including necessary centering and shuttering supply of all material,labour T & P etc. required for proper completion of work. |
| 34 | M. S. or Iron work in plain work such as R.C.C.or R.B. work (when not included in over all rates) brought to required shape as necessary including bending for proper completion of the work including supply of steel and its wastage. |
| 35 | Supply and fixing of Z- Section section window frames fitted with M.S. bar grill and Shutters openable outside as per drawing and design approved by E/I, hinges of approved quality,M.S. or C.I. handles,hold fast 4 nos of M.S. flat 25x5 mm and 150 mm long, pegs of M.S. 30 cm long having 4 holes with pagester and brackets welded or riveted to frame complete including the cost of Glass Panes & including supply of all material,labour T & P etc. required for proper completion of work. |
| 36 | 12 mm thick plaster with cement and coarse sand mortar I:6 over brick work minimum thickness not to be less than 10 mm including supply of all material,labour T & P etc. required for proper completion of work. |
| 37 | Same as item no. 2.13 but in 1:4 mortar on ceiling and half brick wall |
| 38 | Supply and fixing of 5 mm thick and20 mm wide glass strips in panelsincluding supply of all material,labour T & P etc. required for proper completion of work. |
| 39 | 25 mm thick 1:2:4cement concrete floor with cement coarse sand and 20 mm gauge stone ballast laid in pannels finished with 3 mm floating coat of neat cement or cement and marble dust in ratio 1:5as specified and removing any overlaping or mortar at the joints of panels if any and giving them uniform finish over 80 mm thick PCC 1:4:8 base concrete including supply of all material,labour T & P etc. required for proper completion of work. |
| 40 | Painting or varnishing new work or new wood work in small areas with one priming coat and two coat of approved quality paint or varnish including supply of all material,labour T & P etc. required for proper completion of work. |
| 41 | White washing three coat including supply of all material,labour T & P etc. required for proper completion of work. |
| 42 | Finishing walls with water proof cement paint of approved make (Apex painting) and quality on new work with two coats to give an even shade including supply of all material,labour T & P etc. required for proper completion of work. |
| 43 | Supply and fixing of Girder (ISMB) of 225 mmx110 mm size over the pump house including its painting with approved quality paint and also one priming coat. |
| 44 | Sand filling in plinth staff quarter pump house and chloronating room including supply of all material,labour T & P etc. required for proper completion of work. |
| 45 | Supply and lay 4 cm thick insulation layer of sand and clay over R.C.C. roof including supply of all material,labour T & P etc. required for proper completion of work. |
| 46 | Supply cutting and dressing with size and fixing V-Notch of size 90 x90 cm in the by pass chamber as per direction of E/I including supply of all material,labour T & P etc. required for proper completion of work. |
| 47 | Mud Faska on R. B. or R.C.C. Roof with 100 mm thick clay layer on roof and laying of tiles and jointing them with cement and sand mortar including supply of all material,labour T&P etc. complete. |
| 48 | Supply & Fix 110 mm dia P.V.C. down pipes complete with rose & bend and gratingswith M.S. clamps 25 X 3 mmfixed on walls & supply of 150 mm long, 6 mmdia nails complete. |
| 49 | Construction of R.C.C. manhole cover 70x70x10 cm for opening in roof slab and fixing it at openingincluding supply of all material,labour T&P etc. complete. |
| 50 | Provide and fix R.c.C jalies of size 30x50 cm and fixing of R.C.C. jalies and plastering the same including supply of all material,labour T&P etc. complete. |
| 51 | Earth filling in campusincluding its cost and cartage up to site of work complete. |
| 52 | Provision of Internal electrification (conceiled fitting) in pumphouse suitable 5 Amp lightpoints in each room/verandah/nd 15 Amp Power points with latest ISI fittings & fixtures like LED lights, PVCinsulated 2.50 mm copperwires for L/F points & 4.00 mm for power points and also supply & fixing of main switch boards( MCB Box) of approved quality in each pumphouse as per direction of engineer-in-charge including supply of all material,labour,T&P etc. complete.(other specifications and details can be get from engineer-in-charge.) |
| 53 | Fixing of 3.6 m wideM.S gate with wicket gate including fabrication ,supply and construction of boundary pillars etc all complete. |
| 54 | Cement concerete with 20mm gauge stone ballast, coarse sand and cement in proportion 4:2:1 supply of all material, labour, T&P etc. required for proper completion of work |
| 55 | P.C.C. 1:4:8,75 mm thick in cement course sand and 40 mm th. Stone ballast |
| 56 | Construction of CC Tile approach road including preparation of subgrade etc. complete spreading 40mm thick local sand. |
| 57 | Recharge of ground water by roof top rain water of pump house and staff quarter, water available from bye pass of tube well and over flow of over head tank as per drawing including supply of all materials,labour, T&P etccomplete (withwater taping arrangement from roof) |
| 58 | Provision of solar street light with pole 200 W led , automaticaly turn on off etc as per direction of engineer-in-charge including supply of all material,labour,T&P etc. complete.(other specifications and details can be get from engineer-in-charge.) |
| 59 | SCHEDULE G-3 (Laying of R.M. pipe line & appurtenent works) |
| 60 | Earth work in Soil mixed with loam, clay or sand with lift upto 1.50 m and lead upto 50 m, filling, watering and ramming of excavated earth into the trenches and disposal of surplus inside the Nagar Panchayat boundary as per site enginner instructions. |
| 61 | Supply,Carting laying & jointing D.I./C.I. pipe line into trenches true to alignment & agradient including cost of all labour, T&P, jointing, materials, testing of pipe line etc. complete |
| 62 | D.I. pipe Class-K-9 |
| 63 | 200 mm dia |
| 64 | Supply of following size and carting upto site of work, lowering, fixing and jointing of followingfittings in trenches including cost of all materials such as rubber packing, nut bolts etc. complete work |
| 65 | C.I.D/F Sluice Valve IS 780-1984 |
| 66 | 200 mm dia |
| 67 | THRUST BLOCK |
| 68 | R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3 in thrust blocks of pipe line including supply of reinforcement and its fixing and binding the same with 0.50 mm thick binding wire on position and necessary centering & shuttering complete. |
| 69 | Mild steel or iron work in RCC wrought to required shape as necessary including bending for proper completion of work including supply of steel and wastage etc. |
| 70 | Supply of D.I. specials for pipeline etc complete |
| 71 | Sluice Valve Chamber (Masonary Type) |
| 72 | SCHEDULE G-4 (Laying of Distribution pipe line & other appurtenent works) |
| 73 | Earth work in soil mixed with loam, clay or sand with lift upto 1.50 m and lead upto 50 m, filling, watering and ramming of excavated earth into the trenches and disposal of surplus earth inside Nagar Panchayat as per instructions of site engineer. |
| 74 | Supply of following size of oipes including railways frieght and cartage up to store , all taxes and duties complete |
| 75 | HDPE Pipe (PE-100) / DI K-7 |
| 76 | 160 mm dia |
| 77 | 140 mm dia |
| 78 | 110 mm dia |
| 79 | 90 mm dia |
| 80 | DI Pipe Class K-7 |
| 81 | 350 mm dia |
| 82 | 300 mm dia |
| 83 | 250 mm dia |
| 84 | 200 mm dia |
| 85 | Carting ,laying and jointing of the following sizes of pipes into the trenches including cost of all jointing materials, labour and T & P , testing etc. complete. |
| 86 | HDPE Pipe (PE-100) / DI K-7 |
| 87 | 160 mm dia |
| 88 | 140 mm dia |
| 89 | 110 mm dia |
| 90 | 90 mm dia |
| 91 | DI Pipe Class K-7 |
| 92 | 350 mm dia |
| 93 | 300 mm dia |
| 94 | 250 mm dia |
| 95 | 200 mm dia |
| 96 | Supply and fixing of following types of fittings including railway frieght, cartage up to site, all taxes and duties etc. complete. |
| 97 | (A) C. I. Sluice Valveas per latest IS specifications |
| 98 | 80 mm dia |
| 99 | 100 mm dia |
| 100 | 125 mm dia |
| 101 | 200 mm dia |
| 102 | 250 mm dia |
| 103 | 300 mm dia |
| 104 | Scour Valve 80 mm dia |
| 105 | Air Valve 20 mm dia |
| 106 | Fire Hydrants 80 mm dia |
| 107 | Supply of all materials, labour, T&P for construction of following chambers as per departmental drawing & design. |
| 108 | Sluice Valve Chamber (Masonary Type) |
| 109 | Sluice Valve Chamber (Surface Box Type) |
| 110 | Fire Hydrant Chambers |
| 111 | Air Valve Chambers |
| 112 | Construction of single tap masonary pillar type stand post as per type design including supply of all matrials labour T&P etc. complete. |
| 113 | Dismantling of following types of road surface for laying of pipe line Including sorting out of serviceable material and disposal of unserviceable material up to 50 m. |
| 114 | C.C.Tiles Road |
| 115 | B.O.E. |
| 116 | C.C. Road |
| 117 | Bituminous Road |
| 118 | Permanent reinstatement of following types of road surface for laying of pipe line Including supply of all material, labour, T&P etc. complete in the direction of engineer incharge. |
| 119 | B.O.E Road (60% old and 40% new Bricks) |
| 120 | B.O.E Road (old Bricks) |
| 121 | C.C.Tiles Road (Laying of 80mm thick C.C soling including dressing surface and including supply of tile, filling of jointing with local sand spreading and blinding coat of 10 mm to 25 mm deep of local sand over the entire surface and including all labour T&P etc. required for proper completion of work with P.C.C. 1:6:12 in cement course sand and 40 mm th. Stone ballast. |
| 122 | C.C. Road (Laying C C road slab 100 thick in 1:2:4 cement, coarse sand and 20 mm stone ballast. |
| 123 | P.C.C. 1:4:8,75 mm thick in cement course sand and 40 mm th. Stone ballast |
| 124 | Bituminous Road |
| 125 | Nala crossing / Culvert crossing / drain crossing including construction of RCC 1 :1.50:3 supporting pillars , M.S. Angle iron clamps and alsoincluding supply of all material such as casing pipe etc. complete. |
| 126 | upto 1 m |
| 127 | 1m-2m width |
| 128 | Supply of all material like G.I pipe 15mm dia specials& fitting brass ferrule etc. complete brass Bibcock as per relevant I.S. specification for making house connection inside houses including excavation, cuttiing of HDPE/AC pipe etc. complete in all respect (90-110 mm dia). |
| 129 | Supply of all material like G.I pipe 15mm dia specials& fitting brass ferrule etc. complete brass Bibcock as per relevant I.S. specification for making house connection inside houses including excavation, cuttiing of HDPE/AC pipe etc. complete in all respect(140-160 mm dia). |
| 130 | Supply of all material like G.I pipe 15mm dia specials& fitting brass ferrule etc. complete brass Bibcock as per relevant I.S. specification for making house connection inside houses including excavation, cuttiing of HDPE,AC/D I pipe etc. complete in all respect(200-350 mm dia). |
| 131 | Maintenance works |
| 132 | Repairing of OHT 750 KL/18 M staging due to seepage in bottom dome , conewall and vertical wall,Brace ,column,beem etc after chieling the loose concrete and insuring water tightness of the OHT with all labour , material T&P complete including required thickness plaster with chemical .Repairing of staircase including supply and fixing of GI pipe hand rail, vertical post and also repairing of minor defect in landing, riser and tread with all labour, material T&P etc. complete.and Painting, colour washing of 750kl/18m OHT, ladder,with approved quality paint. (Asian Apex Paint) and Repairing or replace aluminium ledder ,lighting conductor,water level indicator etc if required, work complete in all respect. |
| 133 | Repairing of following dia water supply pipeline leakage with supply all material ,specials labour dismantling and reinstatement type of road etc complete |
| 134 | 200 mm dia AC pipe / 200 mm dia PVC Pipe |
| 135 | 140 mm to 160 mm dia PVC Pipe |
| 136 | 63 mm to 110 mm dia PVC Pipe |
| 137 | Repairing and painting work etc complete of Existing boundrywall complete in all respect. |
| 138 | Repairingand painting work etc complete existing pumphouse complete in all respect. |
| 139 | Reparing of house connections by providing ferrule in each connections including dismantling and reinstatement of all type of road in existing line |
| 140 | Repairing of existing pipeline (where pipeline is damaged more than 5 mtr length) offollowing dia with supply all material ,specials, labour & including dismantling and reinstatement of all types of road complete in all respect. |
| 141 | 200 mm dia |
| 142 | 140 mm to 160 mm dia |
| 143 | 63 mm to 110 mm dia |
| 144 | (E&M WORK ) |
| 145 | Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. |
| 146 | Transportation, Erection and Dismantling of Rig Machine |
| 147 | Drilling of 600mm size bore from GL to 45 BGL( 45x2=90m) |
| 148 | Drilling of 500mm size bore from |
| 149 | (i) 45M BGL to 100MBGL ( 55x2=110m) |
| 150 | (ii) 100M BGL to 150MBGL ( 50x2=100m) |
| 151 | M.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. As required & as per typed design complete in all respect. |
| 152 | 300 mm. Dia MS ERW Housing/ casing pipe having wall thickness of 7.1mm. ( 42x2=84m) |
| 153 | 200 mm. Dia MS ERW slotted/ casing pipe having wall thickness of 7.1mm. ( 93x2=186m) |
| 154 | Supply of pea gravel ( 41x2=82m) |
| 155 | Logging of bore hole by departmental / approved electric logger.( 1x2= 2 job) |
| 156 | Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. |
| 157 | Lowering of 300mm dia pipe from GL to 42m deep BGL.( 42x2=84m) |
| 158 | Lowering of 200mm dia pipe from 42 to 100m deep BGL.( 58x2=116m) |
| 159 | Lowering of 200mm dia pipe from 100 to 135m deep BGL. ( 35x2=70m) |
| 160 | Development of Tubewell by compressor |
| 161 | Transportation, Installation and Dismantling of 600 PSI Compressor |
| 162 | Development of Tubewell by 600 PSI Capacity Air compressor |
| 163 | Development of Tubewell by O.P. Unit |
| 164 | Transportation, Installation and Dismantling of3 Cusec O.P. Unit & Yield Test. |
| 165 | Development of Tubewell by 3 Cusec Capacity by O.P. Unit |
| 166 | Chemical and Bacterological test of water sample from depaprtmental/ approved lab. |
| 167 | E/M Works for Submersible Pumping Plant Complete over New Tubewell. |
| 168 | SITC of pumping plant including starter, control panel complete in all respect with all required material, T&P labour etc. Submersible pump set of1500 LPM discharge 53 mtr. head coupled with suitable HP rating of Motor A.C. Three phase. ( Discharge & Head both are tentative and may vary as per actual site condition at the time of execution.) |
| 169 | Voltage stabilizer Servo type (240V-500V) suitable for above motor. |
| 170 | SITC of main piping and valves with 24m column pipe, electronic type chlorinating plant, power wiring, earthing, painting, tool set, M.S. cross for reducer, wiring of pump house (Internal & External), Chain pulley block and gauges complete in all respect with all required material, T&P and labour. (Main Piping and valves of 150mm dia.) |
| 171 | 3 Mtr. long heavy duty size 150mm diacolumn pipe same as above ( 1 set= 2 column pipes) |
| 172 | Additonal XLPE insulated copper conductor cable size 2x3cx10 sq mm. for submersible pump set. |
| 173 | PVC insulated Al. armoured cable size 1x3.5cx25 sq mm. from transformer LV side to meter panel and meter panel to starter. |
| 174 | E/M Works for Submersible Pumping Plant Complete over ExistingTubewell. |
| 175 | Supply, Installation and Commissioning of 30 H.P. Pumping Plant including SCADA compitable starter, Control Panal, Cable, complete in all respect with all required material T&P labour etc. ( Discharge ,Head & Motor HP are tentative and may vary as per actual site condition at the time of execution.) |
| 176 | Supply, Installation and Commissioning of Main piping and valves with 150 mm dia Size 24 mtr. Column pipe, Electronic type Chlorinating plant Power wiring, earthing, painting,Tools sets, wiring of pump house(internal & External) Chain Pulley block and gauges complete in all respect with all required material, T&P Labour (Sluice Valve Confirming to IS:14846-2000 & Reflex Valve Confirming to IS:5312 |
| 177 | 3 Mtr. long heavy duty size 150mm diacolumn pipe same as above ( 1 set= 2 column pipes) |
| 178 | Additonal XLPE insulated copper conductor cable size 2x3cx10 sq mm. for submersible pump set. |
| 179 | Dismentaling of old puming plant with rusted 6 " dia column pipes,panel,stabilizer ,their accessories etc with transportation of material in nagar palika store . |
| 180 | Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size 300 mm & compatible with SCADA system at OHTs. |
| 181 | Supply, Installation and Commissioning of automatic servo voltage Stabilizer-25 KVA(Input Voltage 250V±500V)to Output Voltage 415V± 1% As per IS 9815-1994 for existing Tubewell suitable for motor rating. |
| 182 | Master Control Station (MCS) |
| 183 | CE & BIS approved manufacturer"s industrial grade LCD monitor with latest configuration as per specification of size 65" |
| 184 | Desktop/PC as per spec. mentioned |
| 185 | CE/UL approved manufacturer"s 3 KVA UPS with batteries as spec. mentioned and Computer as per requirement |
| 186 | Full development version of required TAGS SCADA software suitable for digital and analog input/output features with customization of software as per requirement as per spec. mentioned with unlimited digital and analog Input/Output features specified in detailed technical document with customization of software as requirement |
| 187 | CE & UL approved manufacturer"s control room PLC with CPU & power supply at MCS in IP65 enclosure as per spec. mentioned |
| 188 | CE/UL certified field gateway agent for transfering data from MCS to control room |
| 189 | GSM based wireless / broadband/Equipment communication system for PLC capable to transfer and gather data from remote sites to control stations, including all accessories complete |
| 190 | CE/UL approved manufacturer"s Firewall for network protection |
| 191 | Lightning surge protector for ethernet communication protection |
| 192 | CE/UL approved manufacturer"s industrial grade ethernet switch |
| 193 | Mobile App facility system architecture complete. |
| 194 | Canon/HP 1018/equivalent Laser printer |
| 195 | Security Survelliance IP camera |
| 196 | Installation, testing and commissioning with required furniture,Air Conditioner etc |
| 197 | Test and trial run |
| 198 | S.I.T.C OF SCADA SYSTEM FOR NEW & EXISTING TUBEWELLS (30 HP) |
| 199 | CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. |
| 200 | G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. |
| 201 | CE & UL certified Inteligent Smart Energy Meter |
| 202 | Motor operated Actuators with Sluice valve of size 150 mm. at Main line and Bye-pass line as well. |
| 203 | CE & UL certified Electro magnatic flow Meter suitable for line size 150 mm. |
| 204 | Soft starter with RS-485 port-400V Class suitable to motor rating |
| 205 | Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) |
| 206 | CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. |
| 207 | CE & UL certified pressure transmitter |
| 208 | CE & UL certified Surge protector for above control panel |
| 209 | CE & UL certified 7" HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. |
| 210 | Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . |
| 211 | Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) |
| 212 | Installation, commissioning & testing for one tubewell |
| 213 | Trial run for three month period for three nos for one tubewell |
| 214 | S.I.T.C OF SCADA SYSTEM FOR A EXISTING TUBEWELL (15 HP) |
| 215 | CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. |
| 216 | G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. |
| 217 | CE & UL certified Inteligent Smart Energy Meter |
| 218 | Motor operated Actuators with Sluice valve of size 150 mm. at Main line and Bye-pass line as well. |
| 219 | CE & UL certified Electro magnatic flow Meter suitable for line size 150 mm. |
| 220 | Soft starter with RS-485 port-400V Class suitable to motorrating |
| 221 | Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) |
| 222 | CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. |
| 223 | CE & UL certified pressure transmitter |
| 224 | CE & UL certified Surge protector for above control panel |
| 225 | CE & UL certified 7" HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. |
| 226 | Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . |
| 227 | Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) |
| 228 | Installation, commissioning & testing for one tubewell |
| 229 | Trial run for three month period for three nos for one tubewell |
| 230 | S.I.T.C OF SCADA SYSTEM FOR 02 Nos. O.H.T HAVING A TUBEWELL WITHIN ITS CAMPUS |
| 231 | Motor operated Actuators with Sluice valve of size 300 mm. at distribution line. |
| 232 | CE & UL certified Electro-magnatic flow Meter suitable for line size 300 mm. |
| 233 | CE & UL certified Radar type level transmitter for OHT |
| 234 | Installation, commissioning & testing for one OHT |
| 235 | Trial run for three month period for three nos for one OHT |
| 236 | Three Months Trial Run of Pumping Plant atall New & Existing Tubewells successfully with consumeables with electricity charges as per specs. in tender document. |
| 237 | Three Months Trial Run of MCS with required Nos. of staffs successfully running of scheme through SCADA System with electricity charges as per specs. in tender document. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
