}

Tender For Construction Of (Sports Facility/Infrastr Ucture) Changing Room / Volleyball, jammu-Jammu And Kashmir

Rashtriya Madhyamika Shiksha Abhiyana-RMSA has published Tender For Construction Of (Sports Facility/Infrastr Ucture) Changing Room / Volleyball. Submission Date for this Tender is 28-11-2022. Sports Complex Tenders in jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

34825961
Corrigendum : Tender For Construction Of (Sports Facility/Infrastr Ucture) Changing Room / Volleyball
Open Tender
Indian
Jammu And Kashmir
jammu
28-11-2022

Tender Details

Construction Of ( Sports Facility / Infrastructure ) Changing Room / Volleyball / Basketball / Foot Ball Court At Govt Girls Higher Secondary School Ligri Zone Paddar District Kishtwar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 25-Nov-2022 AMENDMENT IN DATES Date 28-11-2022

Key Value

Document Fees
INR 600 /-
EMD
INR 34600.0 /-
Tender Value
INR 17.30 Lakhs /-

BOQ Items

Name of Work: CONSTRUCTION OF (SPORTS FACILITY/INFRASTRUCTURE) CHANGING ROOM / VOLLEYBALL /BASKETBALL / FOOT BALL COURT AT GOVT GIRLS HIGHER SECONDARY SCHOOL LIGRI ZONE PADDAR DISTRICT KISHTWAR
Sl. No. Item Description
1Surface dressing of ground including removing vegetations and in-equalities not exceeding 15 cm deep and disposal of rubbish ,lead upto 50 mtr and lift upto 1.5 mtr in-all kinds of soil
2Supply and filling of good earth including levelling , tamping, consolidating, carriage, labour etc. all job complete
3Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil .
4Providing and laying Stone Soling including ramming all jobs complete
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:5:10) grade, with 40mm nominal size of (Crushed stone aggregates).
6Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates.
7Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed Aggregates.
8Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
9Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 course sand 4 graded stone aggregate 20mm nominal size
10Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand)
11Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)
12Providing and fixing of aluminum work for door windows ventilators and partations etc with standard particle section fixed with stainless steel screws of req dia alminum section shall be smooth rust free straight and jointed mechanically whereever required including cleat angle and necessary filling up of gaps at junction , i.e, at top bottom and sides with required EPDM rubber ,gasket felt etc. for shutter of door windows anodizing aluminum with minimum of 2.5 x 1.5 mm and ACP sheet in pnaeling fixed in aluminium doors etc
13Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.
14Centering and Shuttering including strutting, popping and removal of form work Foundations: footings, bases of columns
15Centering and Shuttering including strutting, popping and removal of form work Lintels, beams, plinth beams, girders, bressumers and centilevers.
1615mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand)
1712mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)
18Cement concrete flooring 1:2:4 ( 1cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size )finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick Aggregates.
19Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
20Providing and fixing Gypsum Board partition upto ceiling height consisting of G. I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G. I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling 595 x 595 mm and 12.5 mm thickcomplete all jobs.
21Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel Primer all works.
22Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.50 mm thick with zinc coating not less than 275gm/m2
23Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete0.50 mm thick with zinc coating not less than 275gm/m2
24Providing and fixing plained eaves boarding.2nd class kail wood250 x 32 mm (nominal size )
25Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and in -eluding priming coat with cement primer.
26Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 300 x 300 mm
27Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesvexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
28Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
29Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
30Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
31Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
32Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:Internal work15 mm dia. nominal bore medium
33Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality andcolour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than190 gms.
34Providing and fixingPVC waste pipe of sink or wash basinincluding PVC waste fitting complete. 40 mm dia
35Providing and fixingPVC soil waste / rain water disposal pipe
36Providing and fixingPVCBend
37Providing and fixingPVCBend
38Carriage of sandby Mechenical transportincluding loading , unloading & stacking complete lead upto 14 km
39Carriage of Stone aggregatesby Mechenical transportincluding loading , unloading & stacking complete lead upto2 km
40Carriage of Bricksby mechenical transportincluding loading , unloading & stacking complete lead upto 280 km
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail