Drinking Water And Sanitation Department has published Tender For Construction Of Bfg, Supplying, Carting, Laying & Jointing Of Rising Main By Welding, Clear Water Sumps / Top / Service Reservoirs, Pump Houses , Supply / Feeder Main / Distribution System With Household Tap Connection And All Other Civil Works. Submission Date for this Tender is 28-11-2022. Industrial Trucks Tenders in dhari Uttarakhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Civil Works:- Supply of all mateials,labour T&P etc. and construct RCC Boulder Filled Gallery 5.00 m wide as per type design complete including Check dam and Protection work |
2 | Same as above item 1(a) but variation in 5 m wide cross wall. |
3 | Supply of all mateials,labour T&P etc. and construct RCC Roughening Filteras per type design complete |
4 | Supply of all mateials,labour T&P etc. and construct RCCIntake Chamber as per type design ( 60×60×60 cm ) |
5 | Excavation work by mechanical means / manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, lift upto 1.5 m, and getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
6 | Soil mixed with Shingle, Bajri and Boulders |
7 | Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) in foundations and floors including supply of all material, labour and T&P etc. required or proper completion of the work. as per drawings and technical specifications |
8 | Providing and laying in position cement concrete of specified grade- All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
9 | Random Rubble ( RR ) masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
10 | Excavation of earth for pipeline in following strata lift upto 1.5 mincluding refilling, watering, ramming of excavated earth into the trenches including supply of labour, T & P etc.all complete |
11 | Soil mixed with Shingle, Bajri and Boulders |
12 | Medium Rock |
13 | Supply, Carting (site store to trench), lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line by welding for making up lengths as required for proper completion of work of following grade & sizes. MS ERW Pipe Yst 210 |
14 | 80 mm dia., 4.8 mm thick. |
15 | 80 mm dia., 5.5 mm thick. |
16 | Supply of G.I. Medium pipes & specialsfittingsincluding Cartage, lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe lineincluding cutting and threading of pipe for making up lengths as requiredfor proper completion of work of followingsizes. |
17 | 15 mm dia. |
18 | 20 mm dia. |
19 | 25 mm dia. |
20 | 32 mm dia. |
21 | 40 mm dia. |
22 | 50 mm dia. |
23 | 65 mm dia. |
24 | 80 mm dia. |
25 | Making connection with the existing M.S. Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing, if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main. |
26 | 15 mm to 25 mm |
27 | 32 mm to 40 mm |
28 | Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50m but excluding the cost of earth work. |
29 | 32 mm |
30 | 25 mm |
31 | 20 mm |
32 | Carting,laying & jointing fixing and testing of dismantled pipes includinglowering them into trenches , laying true to alignment & gradient , laying & jointing of pipe line including cutting & threading of pipe for making up lengths as required for proper completion of work |
33 | 32 mm |
34 | 25 mm |
35 | 20 mm |
36 | Filling of earth in plinth including dressing, ramming with excavated earth. |
37 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All works up to plinth level 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) |
38 | Reinforced cement concrete work in walls ( any thickness ), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level,( 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) |
39 | Steel reinforcement for RCC work including straightening, cutting, bending, placing, in position and binding all complete upto plinth level. ( Hot rolled deformed bars ) |
40 | Brick work with common burnt clay FPS ( non modula ) bricks of class designation 7.5 in foundation and plinth in [ Cement mortar 1:4 ( 1 Cement : 4 Coarse sand ) ] |
41 | Brick work with common burnt clay FPS ( non modula ) bricks of class designation 7.5 in Superstructure above plinth level up to floor V level in All shapes and sizes in : [ Cement mortar1:6 ( 1 Cement : 1 Coarse sand ) ] |
42 | Structural steel works riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
43 | Providing and fixing 1mm thick MS sheet door with frame of 40×40×6mm angle iron and 3mm MS gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer : ( Using flats 30 mm x 6 mm for diagonal braces and central cross piece ) |
44 | 12 mm thick cement plaster 1:6 (1cement : 6 coarse sand) |
45 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (40 mm thick with 20 mm nominal size stone aggregate ) |
46 | Providing and fixing of glass strips in joints of terrazo/cement concrete floors ( 40 mm x 4 mm size ) |
47 | Distempering with dry distemper of approved brand and manufacture ( two or more coats ) of required shade on new work, over and including water thinnable priming coat to give an even shade |
48 | Finishing walls with Acrylic Smooth exterior paintingtwo or more coats on new work and .with cementprimer one coat |
49 | Painting on steel surfaces with paint of approved quality including priming coat. |
50 | Supply & fixing of 100 mm dia S.C.I down take pipe including clamping in walls etc. |
51 | Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2. |
52 | 2.00KL |
53 | 10.00 KL |
54 | 15.00 KL |
55 | 20.00 KL |
56 | 40.00 KL |
57 | 50.00 KL |
58 | Supply of all materials, labour, T & P etc and construction of RCCM 20 grade Break Pressure Tank (BPT) (1m x 1m x 1m)as per departmentaltype design. |
59 | Supply and Installation ofBucket type Chlorinator of 25 litr capacity on the top of service reservoirs as perdepartmental type design Complete. |
60 | Supply of all materials, labour, T & P etc. and Construction of Thrust Block as per type design complete |
61 | 0.8 m x0.8 m x1.2 m |
62 | 0.8 m x0.8 m x0.9 m |
63 | Supply of all materials, labour, T & P etc. and Construction of Sluice Valve / Reflux Valve / Scour Valve Chamber as per type design complete (Size :- 1.2 m x 1.2 m x 1.0 m) |
64 | Supply of all materials, labour, T & P etc. and Construction of Gate / Wheel /Air Valve Chamber as per type design complete (Size :- 0.9 m x 0.9 m x 1.0 m) |
65 | Supply of all materials, labour, T & P etc and construction of Wheel / Air Valve & Water Meter Chamber with brick work in 1:4 cement Sand morter, plastring in 1:3 c/s morter as per type, design (Size :- 0.6 m x 0.6 m x 0.75 m) |
66 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : |
67 | 50 mm dia nominal bore |
68 | 65 mm dia nominal bore |
69 | Making Ferrul connection with the M.S./ Galvanised mains fixing ferrul, washer etc. |
70 | up to 25 mm nominal dia. |
71 | supply of Brass ferrul 15 mm with C.I. mouth cover |
72 | Bib Cock with Aerator |
73 | Dismantling of following existing road pavement for laying different sizes of pipes, stacking the serviceable materials and disposal of waste materials upto a distance of 30 m including supply of materials, labour, T&P etc. Complete ( CC Road ) |
74 | Supply and fixing of the following fittings including cartage of materials labour T&P and testing of valves etc. complete.(Wheel valves / Gate Valves/Scour Valves etc. )(Size in mm) |
75 | 80 mm dia. Cast steel Sluice / Scour Valve, W.P. 50 Kg/cm2 |
76 | 80 mm dia. Cast steel Reflux / Swing Check Valve, W.P. 50 Kg/cm2 |
77 | 50 mm dia. Cast steel Double Ball Air Valve Flanged type, W.P. 25 Kg/cm2 |
78 | Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete(G.M Gate Valve IS 778 Vertical Check Class -1)(Sluice valves(PN 1.60)) |
79 | 20 mm |
80 | 25 mm |
81 | 32 mm |
82 | 40 mm |
83 | 50 mm |
84 | 65 mm |
85 | 80 mm |
86 | C.I. Air Valve (Screwed) |
87 | 20 mm |
88 | Provision of 1.5 m high Boundary Wall in brick masonry including supply of all materials, labour, T&P etc. complete. ( At IPS / IPS cum CWR site ) |
89 | Provision of 1.8 m high Barbed Wire Fencing through angle iron posts around the Storage reservoirs & water works site .At proposed CWRs |
90 | E&M Works M.P.S (Stage-I) |
91 | 1- Supply of high head horizontal multi stage CENTRIFUGAL pumping plant to deliver 270LPM 320Mtr. Head With Coupling 2- Supply of Induction motor T.E.F.C 2900 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply Suitable for above Pumpset. 3- Supply of M.S. fabricated base plate for above pump and motor set, with coupling guard. |
92 | Supply of 40 H.P Fully automatic Auto Transformer starter as per Specification and site requirement. |
93 | Supply of Control Panel as Per Specification and site requirement. |
94 | Supply of Power Wiring material as per Specification and site requirement as below. |
95 | 50 mm² Al. conductor 3½ core XLPE/PVC insulatedarmoured cable of 1.1 KV grade |
96 | 25 mm² copper conductor, 3 core,PVC insulated submersible flat cable of 1.1 KV grade |
97 | Jointing material such as lugs, tape etc. |
98 | Earthing Material as per site requirement and specifications. |
99 | MAIN PIPING AND VALVES ( Suction / Delivery side/ By pass) as per Specification and site requirement. |
100 | GAUGES as per Specification and site requirement. |
101 | Tools as per site requirement. |
102 | Supply of Rubber Resistance Sheet of size 1m x 2m x0.025m |
103 | Supply of 100KVA Servo control voltage stabilizer as per specification and site requirement. |
104 | 125 Amp TPN main switch |
105 | Chain Pulley 2 Tonne capacity 4 Mtr lift |
106 | Installation, Testing and commissioning of Pumping Plants |
107 | Testing At manufacturer works |
108 | Painting of entire installation |
109 | Internaland external electrification |
110 | Carting of Pumping Plantsincluding all accessories |
111 | One month TrialRunning & Five month Maintenance including watch & ward. |
112 | I.P.S (Stage-II) |
113 | 1- Supply of high head horizontal multi stage CENTRIFUGAL pumping plant to deliver 180LPM 190Mtr. Head With Coupling 2- Supply of Induction motor T.E.F.C 2900 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply Suitable for above Pumpset. 3- Supply of M.S. fabricated base plate for above pump and motor set, with coupling guard. |
114 | Supply of 15 H.P Fully Automatic Auto Traformer Starter cum panel. |
115 | Supply of Power Wiring material as per Specification and site requirement as below. |
116 | 25 mm² Al. conductor 3½ core XLPE/PVC insulatedarmoured cable of 1.1 KV grade |
117 | 10 mm² copper conductor, 3 core,PVC insulated submersible flat cable of 1.1 KV grade |
118 | Jointing material such as lugs, tape etc. |
119 | Earthing Material as per specification and site requirement. |
120 | MAIN PIPING AND VALVES ( Suction / Delivery side/ By pass) as per Specification and site requirement. |
121 | GAUGES as per Specification and site requirement. |
122 | Tools as per specification and site requirement. |
123 | Supply of Rubber Resistance Sheet of size 1m x 2m x0.025m |
124 | Supply of 30KVA Servo control voltage stabilizer |
125 | 63 Amp TPN main switch |
126 | Installation, Testing and commissioning of Pumping Plants |
127 | Painting of entire installation |
128 | Internaland external electrification |
129 | Carting of Pumping Plantsincluding all accessories |
130 | One month TrialRunning & Five month Maintenance including watch & ward. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail