Tender For Street Light Work Near Belaisha Railway Over Bridge To Curcuit House Azamgarh.
Tender Value
1.12 Crore
Estimated cost
Bid Submission
29 Nov 2022
0 days left
EMD
2.26 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Azamgarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Street Light Work Near Belaisha Railway Over Bridge To Curcuit House Azamgarh.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect (P.W.D. S.O.R. 2018 S.I. No. 646) |
| 2 | Supply & fixing of LED Street light Fitting having die aluminium body and diffuser with driver set suitable for 110 watt To 130 watt. Confirming to IP 66 protection complete in all respect. CAT-AAA As per PWD SOR 2018 S.I No 1424 |
| 3 | Supply and fixing of 40amp TPN of automatic strit light cubicle control apnel painted with anti corrosive alkali and acid proof paint consisting of time switch TS0 100 series with contractors,HRC fuse,isolating switch metering instrument & instrument box with Cts etc in case of TPN , complete in all respect As per PWD SOR 2018 S.I No 807 F (ii) |
| 4 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB\"s (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB\"s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.(P.W.D. S.O.R. 2018 S.I. No. 811A)Incoming - 100 Amp/415 Volt MCCB- 1 No.Outgoing - 63 Amp. MCCB- 2No. |
| 5 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified P.W.D.S.O.R. 2018 S.I. No.725 (A) |
| 6 | Supplying & Laying of 25mm x 3 mm G.I. Strip for earth Electrode directly in the ground as required complete in all respects. P.W.D.S.O.R. 2018 S.I. No.716 |
| 7 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site..P.W.D.S.O.R. 2018 S.I. No.723 |
| 8 | Supply and laying of following sizes of Al. conductor PVC insulated armoured, served sheathed cable 1100 V grade at a depth of 75 cm below ground levelover a cushion of 75 mm thick sand alround and protected with brick on sides and TPN on surface the cable run shall be fixed on MS clamps etc. of suitable sizde and crossing the road, cable should run through 150 mm dia hume pipe and in case of air like catenary it shall be hanged with the help of G.I. wire, clipped at several places as per direction of E/I. for proper completion of work. The armouring of cable shall be properly connected with earth conductor by clamps. (As per specification no 28)Size 6Sq. mm,x2 core (for fixture) P.W.D.S.O.R.2018 S.I.No.501 (A) |
| 9 | Supply and laying of following sizes of Al. conductor PVC insulated armoured, served sheathed cable 1100 V grade at a depth of 75 cm below ground levelover a cushion of 75 mm thick sand alround and protected with brick on sides and TPN on surface the cable run shall be fixed on MS clamps etc. of suitable sizde and crossing the road, cable should run through 150 mm dia hume pipe and in case of air like catenary it shall be hanged with the help of G.I. wire, clipped at several places as per direction of E/I. for proper completion of work. The armouring of cable shall be properly connected with earth conductor by clamps. (As per specification no 28)10 Sq. mmx4 core (four pole) P.W.D.S.O.R.2018 S.I.No.501 (H) |
| 10 | Supply and laying of following sizes of Al. conductor PVC insulated armoured, served sheathed cable 1100 V grade at a depth of 75 cm below ground levelover a cushion of 75 mm thick sand alround and protected with brick on sides and TPN on surface the cable run shall be fixed on MS clamps etc. of suitable sizde and crossing the road, cable should run through 150 mm dia hume pipe and in case of air like catenary it shall be hanged with the help of G.I. wire, clipped at several places as per direction of E/I. for proper completion of work. The armouring of cable shall be properly connected with earth conductor by clamps. (As per specification no 28)25Sq.mmx 3-1/2 core (for pannel to incoming ) P.W.D.S.O.R.2018 S.I.No.501 (J) |
| 11 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.Size 6Sq. mm,x2 coreP.W.D.S.O.R.2018 S.I.No.503 (A) |
| 12 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.10 Sq. mmx4 coreP.W.D.S.O.R.2018 S.I.No.503 (H) |
| 13 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.25Sq.mmx 3-1/2 coreP.W.D.S.O.R.2018 S.I.No.503 (J) |
| 14 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-InchargSize 6Sq. mm,P.W.D.S.O.R.2018 S.I.No.504 (B) |
| 15 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharg10 Sq. mm P.W.D.S.O.R.2018 S.I.No.504 (C) |
| 16 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharg25Sq.mmP.W.D.S.O.R.2018 S.I.No.504 (E) |
| 17 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part 11 complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.. complete as required 63 mm dia (OD-63 mm & ID-51 mm nominal) |
AI Tender Summary
Tender Timeline
Nov 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 29, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 29, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender