Tender For Providing Additional Essential Requirement And Visitors Path Way Arrangements For The Work Of Construction Of Sub Jail Building With Development Works At Tindivanam In Villupuram District
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Nov 2022
0 days left
EMD
35600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tindivanam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Additional Essential Requirement And Visitors Path Way Arrangements For The Work Of Construction Of Sub Jail Building With Development Works At Tindivanam In Villupuram District
BOQ
| Sl. No. | Item Description |
| 1 | 1.1 :Earth work excavation in all soils (including refilling) a. 0 to 2 mt. |
| 2 | 31 : Weathering course with concrete broken brick jelly 20mm (No sand) |
| 3 | 39 : Supplying and fixing of M.s Grills |
| 4 | 41 : Painting - New \"iron work\" |
| 5 | 86 : Anti termite treatment |
| 6 | ANNEXURE-I2.1.1 : Supplying and filling with Gravel |
| 7 | 2.1.3 : Supplying and Filling with crushed stone sand |
| 8 | 3.1.1 : P.C.C.1:5:10 for Foundation & Basement (using one of cement, five of crushed stone sand & ten of 40mm hard broken stone jelly) |
| 9 | 6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4\" x 4 1/4\"x 2 3/4\") (using crushed stone sand) with admixture |
| 10 | 8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement. |
| 11 | b) In Ground Floor |
| 12 | 9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4\" x 4 1/4\"x 2 3/4\") (using crushed stone sand) with admixturea. In Ground Floor |
| 13 | 18.1 : Formwork using M.S.Sheeta.For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 14 | b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works |
| 15 | c.For Square and rectangular columns and small quantities |
| 16 | 33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer |
| 17 | 38.6 : One coat white cement for new walls and other similar works. |
| 18 | 38.7 : Two coat of Plastic Emulsion PAINT including primer for outer walls |
| 19 | 43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods. |
| 20 | 64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.a. Light point with ceiling rose |
| 21 | 799 : Two coats of OBD over one coat white cement for inner walls |
| 22 | ANNEXURE-II:A1:Supplying and laying Rubber Moulded Hydraulic Pressed Paver Block 63mm thickness of approved quality including cost of conveyance of paver blocks and labour charges for laying to proper level, slope and hammering charges etc., |
| 23 | A2: Supplying, fabricating and fixing in position of Semi-circle steel stress roof covering with bare galvalume sheet 0.47mm thick and 70x50mm MS hollow tube truss, 50x50mm MS hollow square tube purlin |
| 24 | A3: Supplying, fabricating and fixing in position of single side slope steel stress roof covering with bare galvalume sheet 0.47mm thick and 70x50mm MS hollow tube truss, 50x50mm MS hollow square tube purlin and 50x40mm MS hollow square tube stiffner |
| 25 | A4: Cleaning the expansion joint (25x12mm) Provided in different places using wire brush to remove dust particles and packing the bituminous pad for the depth required (12.5mm) and mixing the part A and part B of Polysulphide sealant |
| 26 | A5: Supplying and fixing of Precast slab 50mm thick using standardised concrete mix for M20 grade, molding the slab, laying, curing, transporting and placing in position etc., complete. a) 300mm dia R.C.C. Collar |
| 27 | A6: Supplying and fixing of PVC Trims (Beading) including charges for fixing in position without damaging . |
| 28 | A7: Supplying and fixing of RCC Circular Precast slab of 1m dia, 0.30m wide and 0.05m thickness made of M20 Design Mix Concrete including steel & fabrication charges b) 1000mm dia R.C.C. Collar |
| 29 | A8: Supply and fixing of CP two way bib cock with Health Faucet |
| 30 | A9: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick |
| 31 | A10: Supplying, Fabricating and fixing the Stainless steel sheet (2mm thick 304 L) for Kitchen platfrom of size 2.70 x 1.50m top covering and alround 150mm bend (with SS screws) |
| 32 | A11: Supplying, fabricating and fixing in position of single side slope steel stress roof covering with bare galvalume sheet including 80mm dia GI \"B\" class vertical post, 80x40mm MS hallow tube truss, 50x50mm MS hallow square tube purloin and 40x40mm MS hallow square tube stiffner |
| 33 | A12: Supply and fixing of Fly proof SS mesh for doors and grill enclosures and etc., |
| 34 | A13: Supply and fixing of 25 x25mm weld mesh for grill enclosures and etc., |
| 35 | A14: Supply and fixing of MS sheet with 3mm dia holes with 2.0 mm thick (14 gauge) for covered gas room doors/windows including primer coat air circulation and safety purposes |
| 36 | A15: Supply and fixing of MS sheet kitchen room doors/windows shutters with 1.6mm thick (16 gauge) including primer coat |
| 37 | A16: Manufacturing, Supplying and Fixing of BoundaryCompound wall entrance gate arrangementsusing 65x65x6mm MS angle frame alround, double side fully covered with 2.5mm MS sheet door shutters 50mm thick and one wicket door with watching open |
| 38 | A17: Drilling holes in hard granite 32mm diameter anchoring the rods for inducing expansion joint Columns |
| 39 | A18: Grouting of holes by lockfix using S Base polyster resin Grout |
| 40 | A19: Supply and Delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for sides and steps in 16 mm MS plain rods fixed at 30cm C/C welded jointed etc ., (including painting arrangements)a. 7.5m staging height. |
| 41 | A20: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125 GSM |
| 42 | A21: Providing T.W. double leaf shutters for Cupboard/ward robes with 25 x25 mm square (with furniture fittings) |
| 43 | A22: Supply and fixing of 20mm thick Cuddapha slab divider for toilet urinals of size 1.20x0.60m |
| 44 | A23: Water Proofing to RCC slab including Basic cleaning of the surfaces to remove dirt, dust, loose particles |
| 45 | A24: Supply and fixing of following SWITCH DISCONNECTOR FUSE UNITS IN OPEN EXECUTION (INTERIOR FOR CUBICAL) a. 63A TPN Switch Disconnector Fuse Units interior only with HRC Fuses Double Break |
| 46 | b. 100A TPN Switch Disconnector Fuse Units interior only with HRC Fuses Double Break |
| 47 | d. 200A TPN Switch Disconnector Fuse Units interior only with HRC Fuses Double Break |
| 48 | A25: Supplying and fixing of 1/2\" x 2\" Round flange with ISI mark etc. |
| 49 | A26: Supplying and fixing of 1\" x 1/2\" Expansion Nipple with ISI mark etc., |
| 50 | A27: Supply, delivery and fixing for precast cement concrete pillar post in standardized concrete mix M-20 grade using M sand ( size of 150x150x2100mm ) |
| 51 | A28: Supply, delivery and fixing of chain link fencing of 2\"x2\" compound shape fencing work for using 10 gauge GI wire |
| 52 | A29: Strengthening of road by using Power Roller / Road Roller including labour and fuel charges etc., |
| 53 | A30: Supply and fixing of63 Amps 30 MA ELCB/RCCB for panel board (Four pole) |
| 54 | A32: Supply of foldable type aluminium ladder of 20 ft height and 1.0 ft width steps in 16 mm aluminium hollow pipe fixed at 30cm C/C welded jointed with ISI mark etc., |
AI Tender Summary
Tender Timeline
Nov 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender