Tender For Pr Of Bishalghar- Boxanagar-Sonamura- Barpathari-Belonia Nec Road (L-83.00 Km) (Portion From Ch- 18.50 Km (Boxanagar R.D Block) To Ch- 19.30 Km (Das Colony), L- 0.810 Km) (Total Pr Length- 0.810 Km) Under Boxanagar Pwd (Randb) Sub Divisi
Tender Overview
Project Description
Pr Of Bishalghar- Boxanagar-Sonamura- Barpathari-Belonia Nec Road (L-83.00 Km) (Portion From Ch- 18.50 Km (Boxanagar R.D Block) To Ch- 19.30 Km (Das Colony), L- 0.810 Km) (Total Pr Length- 0.810 Km) Under Boxanagar Pwd (Randb) Sub Division Grouting, Recarpeting, Sand Seal Coat And Other Aliied Works.
BOQ
| Sl. No. | Item Description |
| 1 | Stripping excess soil from the shoulder surface to aciheve the approved level and compacting with plate compactor at OMC as per drawing & MoRD technical specification clause 1903 |
| 2 | Construction of unlined surface drains of average cross-sectional area 0.4 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307.i) Surface Drains in Ordinary Soil A. Manual Means |
| 3 | Maintenance of bituminous surface roadRepair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with 75 mm BM, after applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and on bottom as per MoRD technical specificationclauses 1900, 502, 503 and 504. |
| 4 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surfaceProviding and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 kg/Sqm |
| 5 | Providing , laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508.Case - I : By Manual Meansi) Bitumen VG-30 |
| 6 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510A. By Manual MeansCase - IV : Type D (premix with fine sand)i) Bitumen (60/70 Grade)VG-30 |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender