|
| 1 | Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removingrubbish off the premises complete all as specified and as directed. |
| 2 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed incement mortar 1:4 complete all as specified and as directed. |
| 3 | M&L for glazedceramic coloured tilesas in vertical surfacesuch as dado/skiriting etc of size 350mm x 250mm /300mmx200mm x 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 4 | M&L for vitrified ceramic tiles 9 to10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match (light shade)overandincluding 15mm thick screed bed in cement mortar 1:4complete all as specified and as directed. |
| 5 | M&L for chequered colour cement concrete tiles with grey cement and pigment of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors / steps fixed over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 6 | M&L for machine pressed precast concrete coloured interlocking paver block with grey cement and pigment of any shape, colour and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade fixedover and including sand filling of minimum 50mm thick complete all as specified and as directed. |
| 7 | Demolition of cement concrete in ground floors and pavings not exceeding 15 CM thickness (below or above ground level) complete all as specified and as directed. |
| 8 | M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, surface finished even and smooth using extra cement complete all as specified and as directed. |
| 9 | Supply only glass dividing strips, 3mm thick and 28mm width and inserted in position to conform to design complete all as specified and as directed. |
| 10 | M&L for 75mm thick PCC 1:3:6 type C-2 using40mm graded stone aggregate as in plinth protection, surface finished even fair complete all as specified and as directed. |
| 11 | M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler & top 30mm primed and sealed with sealing compound, Grade `A\" in75 mm thick concrete complete all as specified and as directed. |
| 12 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 13 | M&L for 15 mm thick rendering(in two layers)onbrick work or concrete sufaces, 1st layer 10 mm thickin cement mortar 1:4 and 2nd layer in cement mortar 1:4 mixed with WPC @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed.Note :- Water proofing compound shall be measured and paid separately. |
| 14 | Supply only integral water proofing compound complete all as specified and as directed. |
| 15 | M&L for 10 mm thick renderingon brickwork or concrete surfaces in cement mortar 1:6,surface finishedeven and fair complete all as specified and as directed. |
| 16 | M&L for 5 mm thick rendering in cement mortar 1:3 as inceiling, surface finished even and fair complete all as specified and as directed. |
| 17 | M&L for applying two coats of oil bound distemperoverone coat of alkali resistant primer and including 1mm thick wall care putty on ceiling complete all as specified and directed |
| 18 | M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on prepared external surfaces of walls of any description over10 cm width or girth etc on column/ pillars, RCC chajja and facia complete all as specified and as directed. |
| 19 | M&L for applying three coat of white washon ceiling including preparation of newly plastered surfaces ofceiling complete all as specified and as directed. |
| 20 | M&L for applying three coat of white washon wall including preparation of newly plastered surfaces ofwall complete all as specified and as directed. |
| 21 | Demolition of brick work or stone masonary built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 22 | M&Lfor brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar1:6 complete all as specified and as directed. |
| 23 | M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 24 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etclaid bedded and pointed in any mortar complete all as specified and as directed. |
| 25 | M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including20 mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified and as directed. |
| 26 | M&L for Rounding to edges of stone slab one edge, such as in steps cooking platform and other similar work complete all as specified and as directed. |
| 27 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exceeding 50m complete all as specified and as directed. |
| 28 | M&L for pre-cast cement concrete 1:2:4, type B-1using 20 mm graded stone aggregatein landings,chajjas, anchorage blocks, cover slabs for manholes , shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary use and waste ofform work complete all as specifiedand as directed. |
| 29 | M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed. |
| 30 | S&F in repair plate rack of size 24inchx30 inchx10 inchcomplete all as specified and as directed.Make : Prayag cat No P-330or equivalent as approved. |
| 31 | S&F in repair stainless steel sinkmade outof 1.0 mmthick stainless steelsheetfor kitchenwith plug , washerswaste pipe , cast ironcantilever bracketsoverall size 915mmX460mmwith bowl size410mmX330mmX160 mmcomplete all as specified and as directed. |
| 32 | S&Fin repairPVC lowlevelflushingcisternof 10 litre capacityfixed including syphonic action type, ball valve,floatand handle including brackets etc complete all as specified and as directed. |
| 33 | S&Fin repair PVC connections 15mm size with PTMT nuts and washers of length 600 mm longcomplete all as specified and as directed. |
| 34 | S&Fin repair600mm x 450 mm fancy type bevellededge mirrorof selected quality glass mountedon 6 mm thickAC building board or commercial plywood and fixedto walls complete all as specified and as directed. |
| 35 | S&Fin repair vitreous china wash hand basin , white flat back of size 580mm X 450mm with fixing brackets including 15 mm bore chromium platedpillar tapfancy type and other fixing accessories including necessary connection and fixed complete all as specified and as directed. |
| 36 | S&Fin repair plasticwater closet seat cover , white closed pattern with flat bottomand cover including chromium platedor aluminimum hinging device complete all as specified and directed. |
| 37 | S&Fin repair50 mm bore Low density polyetylene pipe(LDPE) of pressure rating 6kgf/cm2 as in waste pipe to wash hand Basin/Kitchen sink /urinal complete all as specified and as directed. |
| 38 | S&Fin repair vitreous chinawash down water closet pan, semi pedestal pattern (Anglo Indian)including fixing bolt, excludingflushing cistern and flush pipecomplete all as specified and as directed. |
| 39 | S&Fin repair 75 mm diameter of outletPVC (SWR) floor trap with grating including jointing with solvent cementcomplete all as specified and as directed. |
| 40 | S&F in repairvitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests excluding flushing cistern and flush pipe including provision of lime concrete complete all as specified and as directed. |
| 41 | S&F in repair 75 mm borePVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to wallscomplete all as specified and as directed. |
| 42 | S&F in repair 75 mm bore PVC (SWR) bend any radiuscomplete all as specified and as directed. |
| 43 | S&F in repair 75 mm bore PVC (SWR) bend with access door complete all as specified and as directed. |
| 44 | Taking down shutters of any description exc 1 Sqmexc 2.0 Sqm per each and refixing the shutter in same opening area complete all as leaf specified and as directed. |
| 45 | S&F in repair 15mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including complete all as specified and as directed. |
| 46 | S&F in repair 20mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including complete all as specified and as directed. |
| 47 | Taking down & refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including taking down complete all as specified and as directed. |
| 48 | Taking down & refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including taking down complete all as specified and as directed. |
| 49 | S&F in repair 15mm dia fancy type Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 50 | S&F in repair 15mm dia fancy type Pillar taps cast copper alloy capstan heads chromium plated screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 51 | S&F inrepair 15mm dia stop valves, cast copper alloy down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
