Tender For Supply Of Furniture And Other Materials, Coochbehar-West Bengal

Supply Of Furniture And Other Materials , Supply And Installation Of Office Furniture, Air Conditioner Machine , Kareena Nxt High Back Supply And Placement Of Executive Revolving Chair As Per Design Approve As Per Order Shall Have Seat / Back Assembly: The Seat Should Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Upholstered With Fabric Or Synthetic Leather And Moulded Polyurethane Foam. The Back Should Be Made Up 1.2 ±0.1Cm. Thick Hot-Pressed Plywood And Upholstered With Replaceable Fabric Or Synthetic Leather Upholstery Covers And Moulded Polyurethane Foam. The Back Ply And Foam Should Bedesigned With Contoured Lumber Support For Comfortable Seating Posture. Back Size48cm. ( W ) X 76.0Cm. ( H ) , Seat Size51.0Cm. ( W ) X 48.0Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam For Seat And Back Should Bemoulded With Density = 45 + / -2 Kg / M³ And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests :The Armrest Top Should Bemade Of Moulded Polyurethane ( P.U ) And Mounted On To A Drop Lift Height Adjustable Type M.S. Tubular Armrest Support Chrome Plated. The Armrest Height Should Beadjustable Up To 6.5±0.5Cm. In 5 Steps & Also Has Swivel Adjustment Of 22º±2° On Both Sides. Knee Tilt Synchro Mechanism With Seat Depth Adjustment Mechanism: The Mechanism Should Bedesigned With The Following Features: •360° Revolving Type. •Single Point Control. •Front Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. •Tilt Tension Adjustment. •4-Position Locking With Anti-Shock Feature. •Seat Back Tilting Ratio Of 1:2 •Seat Depth Adjustment Of 6.0 ±0.5Cm. Can Be Locked In 6 Positions Adjustable Backrest: The Backrest Consshould Be Ts Of A Sliding Up Down Mechanism, Which Can Be Adjusted In The Range Of 7.5±0.5Cm. And Can Be Locked In 5 Positions For Correct Position Of Lumber Support. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Of 9.0 ±0.3Cm. Pedestal Assembly:The Pedestal Should Befabricated From 0.2 ± 0.02 Cm Thick Hr Sheet ( Should Be: Dd 1079 / Hrskin Pass ) , Chrome Plated And Assembled With Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twinwheel Castors. The Pedestal Should Be66.0±0.5Cm. Pitch-Center Dia. ( 76.0±1.0 Cm With Castors ) . Twin Wheel Castors The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. Overall Dimensions Of Chair Seat Height - Min 47.5 To Max 57.5Cm. Height - Min 103.5 To Max 120.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-76.0 Cm And Depth-76.0 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc ( Indian Green Building Council ) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification ( From Ul ) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb ( National Accreditation Board For Certification Bodies ) Accredited Organization Otherwise Certificates Will Not Be Accepted. ( Dimension & Variation ±1.0Cm Allowed ) . , Aristo Main Table With Eru & Attached Pedestal ( 2100 X 2250X 750 ) Supply And Placement Of Executive Table With Eru ( Extended Return Unit ) And Attached Pedestal As Per Design Approve As Per Order Shall Have An Overall Size Of 2100Mm ( W ) X 2250Mm ( D ) X 750Mm ( H ) . Primary Work Surface- Made Of 25M Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Made Of 25Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Secondary Work Surface- Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel- Made Of 25Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Understructure- Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal- Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestal Is Provided With Lock For Security. The Manufacturer Should Be A Member Of Bifma & Igbc ( Indian Green Building Council ) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification ( From Ul ) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb ( National Accreditation Board For Certification Bodies ) Accredited Organization Otherwise Certificates Will Not Be Accepted. ( Dimension & Variation ±1.0Cm Allowed ) . , Motion Visitor Supply And Placement Of Visitor Chair As Per Design Approve As Per Order Shall Have An Seat / Back Assembly: The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. Back Size : 44.0 Cm. ( / 1 / ) X 46.0 Cm. ( H ) Seat Size : 48.5 Cm. ( W ) X 47.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Used In Seat And Back Cushion Is Moulded In Density Min 48 Kg / M3, And Hardness Load 15 ± 2 Kgf As Per Is:7888 For 25% Compression. 3. Visitor Frame Assembly :- The Powder Coated ( Dft 40-60 Micron ) Tubular Frame Is Cantilever Type And Made Of Dia 2.54 + / - 0.03 Cm X 0.3 + / - 0.016Cm Thk Ms Erw Tube. Shoes Are Made Of Glass Filled Poly Amideand Fixed To The Tubular Frame. Overall Dimensions Of Chair Seat Height - Min 47.1 Cm. Height - 93.3 Cm. Width & Depth Of Chair As Measured From Pedestal - Width-48.5 Cm And Depth-58.9 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc ( Indian Green Building Council ) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification ( From Ul ) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb ( National Accreditation Board For Certification Bodies ) Accredited Organization Otherwise Certificates Will Not Be Accepted. ( Dimension & Variation ±1.0Cm Allowed ) . , Glassdoor Storwel Plain Supply And Placement Of Glassdoor Almirah As Per Design Approve As Per Order Shall Have An Overall Size Of 916Mm ( W ) X 486Mm ( D ) X 1980Mm ( H ) With Welded Construction. It Should Have Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Glass Door Storwel Shall Have A Brass Handle And A 2-Way Locking Mechanism With Shooting Bolt. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available. The Manufacturer Should Be A Member Of Bifma & Igbc ( Indian Green Building Council ) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification ( From Ul ) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb ( National Accreditation Board For Certification Bodies ) Accredited Organization Otherwise Certificates Will Not Be Accepted. ( Dimension & Variation ±1.0Cm Allowed ) . , Enterprise 1200 Without Cpu Hanger Supply And Placement Of Office Table As Per Design Approve As Per Order Shall Have An Overall Size Of 1200 Width Mm X 600 Depth Mm X 728 Height Mm. Top Shall Be 18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edge Banding. Under Structure Modesty Panel 18 Mm Thick Pre Laminated Particle Board. The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat ( Epoxy Polyster ) . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Tube , Finish Powder Coat ( Epoxy Polyster ) .The Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus The Drawer Front Shall Be 0.8Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) . The Manufacturer Should Be A Member Of Bifma & Igbc ( Indian Green Building Council ) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification ( From Ul ) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb ( National Accreditation Board For Certification Bodies ) Accredited Organization Otherwise Certificates Will Not Be Accepted. ( Dimension & Variation ±1.0Cm Allowed ) . , Unwind Chair W / O Arms ( Ms Powder Coated Understructure ) Supply And Placement Of Cafe Chairas Per Design Approve As Per Order Shall Have The Seat And Back Should Bemade Up Of Injection Moulded Indoor Grade Poly Propylene Compound Seat Size : 52.5 Cm. ( W ) X 53.2 Cm. ( D ) Back Size : 51.6 Cm. ( W ) X 40.5 Cm. ( H ) The Powder Coated ( Dft 50±10 Microns ) Welded Tubular Frame Should Bemade From 0 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm And 3.5 ± 0.03 Cm X 1.5 ± 0.03 Cm X 0.16 ± 0.0128 Cm Mserw Tube. The Shoes Should Be Made Of Indoor Grade Poly Propylene Compound And Snap Fitted With Tubular Frame. Overall Dimensions Of Chair Seat Height - 45.0 Cm. Height - 84.5Cm. Width-52.5 Cm And Depth-55.8 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc ( Indian Green Building Council ) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification ( From Ul ) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb ( National Accreditation Board For Certification Bodies ) Accredited Organization Otherwise Certificates Will Not Be Accepted. ( Dimension & Variation ±1.0Cm Allowed ) . , 4-Door Plu + Locker ( Base Unit ) + Stand Supply And Placement Of 4-Door Personal Locker Unit With Stand As Per Design Approve As Per Order Shall Have Anoverall Size 380Mm ( W ) X 450Mm ( D ) X 1830Mm ( H ) . Stackability Shall Have Add- On Units That Can Be Stacked Width Wise To Form Bank Of Lockers Having Common Side Panel. Locking Shall Have 10 Lever Cam Lock With Lock Lever Plus Option Of Hasp Arrangement . Material Shall Be Crca 0.6 Mm Thickness . Construction Shall Be Rigid Knockdown Construction , Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum . Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns . Handle / Label Holder Shall Be Aesthetically Appealing Snap Fit Absplastic Handle . Ventilation Shall Be Attractive Punched Pattern For Ventilation .Overall Size Of Stand For One Locker ( Black ) Shall Be380mm ( W ) X450mm ( D ) X125mm ( H ) . 10 Lever Cam Lock With Lock Lever Plus Option Of Hasp Arrangement . The Manufacturer Should Be A Member Of Bifma & Igbc ( Indian Green Building Council ) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification ( From Ul ) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb ( National Accreditation Board For Certification Bodies ) Accredited Organization Otherwise Certificates Will Not Be Accepted. ( Dimension & Variation ±1.0Cm Allowed ) . , Earl Visitor Supply And Placement Offour Legged Visitors Chairas Per Design Approve As Per Order Shall Have An Seat / Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0..1 Cm. Thick Hot Pressed Plywood And Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Should Be Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.5Cm. ( W ) X 45.5Cm. ( H ) Seat Size: 49.5Cm. ( W ) X 43.0Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+1-2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. 3. Armrests: The One-Piece Armrests Made Of Black Integral Skin Polyurethane With 50-70 Shore Hardness And Reinforced With M.S. Insert. The Armrests Should Be Scratch And Weather Resistant Tant. The Armrests Should Be Fitted To The Seat With Seat Armrest Connecting Bracket Made Of 0.3 ±0.022Cm. Thk. Hr Steel. 4. Fixed Type Mechanism: The Fixed Type Mechanism Should Be Without Back Tilt. 5.Tubular Understructure: The Under Structure Should Bemade Ofø2.54 2.54±0.03Cm.X 0.2 ±0.016Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns ) Overall Dimensions Of Chair Seat Height - 45.0Cm. Height -84.0Cm. Width & Depth Of Chair As Measured From Pedestal - Width-55.0 Cm And Depth-58.0 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc ( Indian Green Building Council ) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification ( From Ul ) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb ( National Accreditation Board For Certification Bodies ) Accredited Organization Otherwise Certificates Will Not Be Accepted. ( Dimension & Variation ±1.0Cm Allowed ) . , Air Conditioner Machine Supply And Installation Of Airconditioner Machine ( 1.5 Ton ) With Inverter Technology

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	28-Nov-2022	EXTENSION OF DATE	Date	01-12-2022

INR 1000 /-

INR 10000.0 /-

Refer document

Name of Work: SUPPLY AND INSTALLATION OF OFFICE FURNITURE, AIR CONDITIONER MACHINE FOR USE OF WBSRDA, COOCH BEHAR-II DIVISION AT GROUND FLOOR OF"UTTARA" WEST OF SOUTH WEST OF SAGARDIGHI, COOCH BEHAR.

Sl. No.	Item Description
1	SUPPLY AND INSTALLATION OF OFFICE FURNITURE, AIR CONDITIONER MACHINE
2	Kareena NXT High Back Supply and placement of Executive Revolving Chair as per design approve as per order shall have SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot-pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should bedesigned with contoured lumber support for comfortable seating posture. BACK SIZE48cm.(W) X 76.0cm.(H),SEAT SIZE51.0cm.(W) X 48.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should bemoulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgffor 25% compression. ARMRESTS :The armrest top should bemade of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height should beadjustable up to 6.5±0.5cm. in 5 steps & also has swivel adjustment of 22º±2° on both sides. KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism: The mechanism should bedesigned with the following features: •360° revolving type. •Single point control. •Front pivot for tilt with feet resting on ground ensuring more comfort. •Tilt tension adjustment. •4-position locking with anti-shock feature. •Seat back tilting ratio of 1:2 •Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 9.0 ±0.3cm. PEDESTAL ASSEMBLY:The pedestal should befabricated from 0.2 ± 0.02 cm thick HR sheet ( should be: DD 1079 / HRskin pass ),chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twinwheel castors. The pedestal should be66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with castors). TWIN WHEEL CASTORS The twin wheel castors should beinjection moulded in black Nylon. Overall Dimensions of Chair Seat Height - min 47.5 to max 57.5cm. Height - min 103.5 to max 120.5cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
3	Aristo Main Table with ERU & Attached Pedestal (2100 x 2250x 750) Supply and placement of Executive Table with ERU (Extended Return Unit) and attached Pedestal as per design approve as per order shall have an overall size of 2100mm(W) x 2250mm(D) x 750mm(H). Primary Work Surface- Made of 25m thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Secondary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel- Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
4	Motion Visitor Supply and placement of Visitor Chair as per design approve as per order shall have an SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 44.0 cm. (/1/) x 46.0 cm. (H)Seat Size : 48.5 cm. (W) x 47.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. 3. VISITOR FRAME ASSEMBLY :- The powder coated (DFT 40-60 micron) tubular frame is cantilever type and made of dia 2.54 +/- 0.03 cm X 0.3 +/- 0.016cm thk MS ERW tube. Shoes are made of glass filled Poly amideand fixed to the tubular frame. Overall Dimensions of Chair Seat Height - min 47.1 cm. Height - 93.3 cm. Width & Depth of Chair as measured from pedestal - Width-48.5 cm and Depth-58.9 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
5	Glassdoor Storwel Plain Supply and placement of Glassdoor Almirah as per design approve as per order shall have an overall size of 916mm(W) x 486mm(D) x 1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The glass door storwel shall have a brass handle and a 2-way locking mechanism with shooting bolt. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
6	Enterprise 1200 without CPU hanger Supply and placement of Office Table as per design approve as per order shall have an overall size of 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edge banding. Under structure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW Tube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
7	Unwind Chair w/o Arms (MS Powder Coated Understructure) Supply and placement of Cafe Chairas per design approve as per order shall have the Seat and Back should bemade up of injection moulded indoor grade Poly Propylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should bemade from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade Poly Propylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
8	4-Door PLU + Locker (Base Unit) + Stand Supply and placement of 4-Door Personal Locker Unit with Stand as per design approve as per order shall have anOverall size 380mm(W) x 450mm(D) x 1830mm(H). Stackability shall have add- on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABSplastic handle . Ventilation shall be attractive punched pattern for ventilation .Overall size of stand for one locker(black) shall be380mm(W)x450mm(D)x125mm(H) . 10 Lever cam lock with lock lever plus option of Hasp arrangement . The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
9	Earl Visitor Supply and placement ofFour Legged Visitors Chairas per design approve as per order shall have an SEAT/BACK ASSEMBLY: The seat and back should bemade up of 1.2 ±0..1 cm. thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam should be designed with contoured lumbar support for extra comfort. BACK SIZE: 49.5cm. (W) X 45.5cm. (H) SEAT SIZE: 49.5cm. (W) X 43.0cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+1-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. 3. ARMRESTS: The one-piece armrests made of black integral skin polyurethane with 50-70 Shore Hardness and reinforced with M.S. insert. The armrests should be scratch and weather resistant tant. The armrests should be fitted to the seat with seat armrest connecting bracket made of 0.3 ±0.022cm. thk. HR steel. 4. FIXED TYPE mechanism: The fixed type mechanism should be without back tilt. 5.TUBULAR UNDERSTRUCTURE: The under structure should bemade ofØ2.54 2.54±0.03cm.x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns) Overall Dimensions of Chair Seat Height - 45.0cm. Height -84.0cm. Width & Depth of Chair as measured from pedestal - Width-55.0 cm and Depth-58.0 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
10	AIR CONDITIONER MACHINE Supply and installation of Airconditioner Machine (1.5 ton) with Inverter Technology