Tender For Provision Of Mob Equipment Stores For Med Regt (Fd Regt) And Rewiring Of Bldg No. P-67 (12 Qtrs) Or Md Accn Of Engr Regt At 550 Acre Under Ge (East ) Ferozepur Cantt, ferozepur-Punjab

Tender For Provision Of Mob Equipment Stores For Med Regt ( Fd Regt ) And Rewiring Of Bldg No. P-67 ( 12 Qtrs ) Or Md Accn Of Engr Regt At 550 Acre Under Ge ( East ) Ferozepur Cantt- 1 B / R Workexcavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, For Lying Cables Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Soft Loose Soil Complete All As Specified And As Directed. 2 M&L Cement Concrete In Foundations 1:4:8 Type D-2, ( 40Mm Graded Stone Aggregate As In Sub Base Of Foundation, Filling And Mass Concrete Complete All As Specified And As Directed. 3 M&L For Brickwork With Subclass ‘B’ Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cm ( 1:6 ) Complete All As Specified And As Directed. 4 Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Soft / Loose Soil Complete All As Specified And As Directed. 5 Removing Excavated Material / Soil N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Complete All As Specified And As Directed. 6 Use And Waste Of Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits ( If Any ) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Rough Finishedsurface Of Concrete Complete All As Specified And As Directed. 7 Use And Waste Of Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns Etc Rough Finishedsurface Of Concreteall As Complete All As Specified And As Directed. 8 Use And Waste Of Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work; Not Exceeding 200Mm Thick ( Horizontal Or Sloping ) Rough Finishedsurface Of Concrete Complete All As Specified And As Directed. 9 Use And Waste Of Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concrete Railings, Openings In Concrete Walls, Floor And Roofs N Exc 20 Cm Wide And Sides Of Rcc / Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10Cm But N Exc 20Cm Widerough Finishedsurface Of Concretecomplete All As Specified And As Directed. 10 Use And Waste Of Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Rough Finishedsurface Of Concretecomplete All As Specified And As Directed. 11 M&L Rcc Design Mix M-25 ( Using 20Mm Graded Stone Aggregate ) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And As Directed. 12 M&L Rcc Design Mix M-25 ( Using 20Mm Graded Stone Aggregate ) Columns, Pillars, Piers, Posts And Struts Complete All As Specified And As Directed. 13 M&L Rcc Design Mix M-25 ( Using 20Mm Graded Stone Aggregate ) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And As Directed. 14 M&L Rcc Design Mix M-25 ( 20Mm Graded Stone Aggregate ) As In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified And As Directed. 15 M&L Mild Steel Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed. 16 All As Per Item No 15 Above But 5Mm Dia And Over Upto And Incl 10Mm Dia In Stirupps, Spacers And Binders Etc Complete All As Specified And As Directed. 17 M&L Rendering 12Mm Thickin Cement Mortar ( 1:4 ) On Any Face Of Brick Walls Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 18 M&L Rendering 15Mm Thickin Cement Mortar ( 1:6 ) On Any Face Of Brick Walls Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 19 M&Lrendering 10 Mm Thick Cement Plaster On Ceiling Surfaces In Cement Mortar 1:4 Finished Fair And Evenwithout Using Extra Cement Complete All As Specified And As Directed. 20 Supply Only Integral Water Proofing Compound Conforming Is 2645-1975 Of Approved Make Complete All As Specified And As Directed. 21 M&L Preparation Of Newly Plastered Surfaces Of Walls Etc, And Applying Three Coats Of White Wash Complete All As Specified And As Directed. 22 M&L Preparation Of New Plastered Surfaces Of Ceiling & Applying Two Coats Of White Wash Complete All As Specified And As Directed. 23 M&L Applying Double Coats Of Bitumen Elastometric Waterproof Coating As On Damp Proof Course / Roof Including Cleaning Of Surfaces Complete All As Specified And As Directed. 24 M&L 75Mm Thick Cement Concrete 1:4:8 Type C-2, Using 40Mm Graded Brick Aggregate As In Sub Floor, Sub Base Etc, Finishing Surfaces Rough To Receive The Topping Layer All As Complete All As Specified And As Directed. 25 M & L Machine Pressed Precast Conctete Interlocking Paver Block Any Shape And Size Confirming To Is 15658-2006 Of 60 Mm Thickness M-35 Grade, Jointed And Pointed With Gray Cement And No Pigment Over Sand Cushioning Complete All As Specified And Directed. 26 M & L Sand Filling Under Floors Or In Foundations Including Watering And Consolidationcomplete All As Directed By Engieer-In-Charge . 27 M&L 75Mm Thick Cement Concrete ( 1:3:6 ) Type C-1 Using 20Mm Graded Stone Aggregate As In Plinth Protection, Surfaces Finished Even And Fair Without Using Extra Cementincluding Provision Of Construction Joints Complete All As Specified And As Directed. 28 M&L 75 Mm Thick Cement Concrete ( 1:2:4 ) Type B-2 Using 40Mm Graded Stone Aggregate As In Floor Topping, Surface Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 29 M&L Glass Dividing Strips, 3 Mm Thick And 38Mm Width Of Strip, Inserted In Position, Conform To Design Complete All As Specified And As Directed. 30 S&F Pressed Steel Frames ( 1.25Mm Sheet Thickness ) For Doors With One Or More Rebates Including Necessary Fixing Lugs , Hinges, Lock Plate, Etc., Size Of Frame 105Mm X 60 Mmincluding One Shop Coat Of Red Oxide Primer Complete All As Specified And As Directed. 31 S&F Of 40Mm Thick Flush Door Shutter Of Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Sides One Face Is Covered With Decorative Face Veneerwith Lipping / Frame To Match Complete All As Specified And As Directed. 32 S&F Factory Made Box Type Steel Window With Pintal Hinges & 2 Nos 150 Mm Mild Steel Tower Bolts To Each Shutter, Steel Handle And With Glazing Bars Dovetailed Or Welded And With One Shop Coat Of Zinc Chromate Primer Complete All As Specified And Shown On Drawing No Cejz / Td-06 / 07 & Cejz / Td-07 / 07. 33 S&F Factory Made Box Type Steel Window With Pintal Hinges & 2 Nos 150 Mm Mild Steel Tower Bolts To Each Shutter, Steel Handle And Withoutglazing Bars Dovetailed Or Welded And With One Shop Coat Of Zinc Chromate Primer Complete All As Specified And Shown On Drawing No Cejz / Td-06 / 07 & Cejz / Td-07 / 07. 34 S&F Steel Ventilators Fixed Type Complete With Glazing Bars Dovetailed Or Welded And With One Shop Coat Of Zinc Chromate Primer Complete All As Specified And As Directed. 35 Mild Steel Framed Work Of E-165 ( Fe 290 ) As In Grills / Guard Bars Shouldered With Steel Window / Ventilator Frames Including Red Oxide Primer Coat Complete All As Specified And As Directed. 36 S&F Mild Steel Door Handles, Stove Enameled Black, Medium Wt 125 Mm Long And Fixed With Steel Screws Complete All As Specified And As Directed. 37 S&F Mild Steel Barrel Tower Bolts, Stove Enameled Black, With Bright Bolt, Medium Weight 150 Mm Long And Fixed With Steel Screws Complete All As Specified And As Directed. 38 S&F 300 Mm Long Mild Steel, Sliding Door Bolt, Plate Type, Stove Enameled Black, With Bright Bolt Not Less Than 12 Mm Dia With And Including Bolts And Nuts Complete All As Specified And As Directed. 39 S&F 3 Mm Thick, Plainsheet Glass Ordinary Quality And Glazing, With Oil Putty Or With Wooden Beads ( Supplied Alongwith Shutters ) , In Squares N.Exc 0.50 Sqm Complete All As Specified And As Directed. 40 S&F Stainless Steel Wire Cloth0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture Not More Than 1.18Mm And Fixed With Tinned Tacks Or Galvanized Wire Staplescomplete All As Specified And As Directed. 41 M&L Cement Concrete ( 1:3:6 ) Type C-1 Using 20 Mm Graded Stone Aggregate As In Fillings And Mass Concrete, Filling Backs Of Chowkats Etc, Complete All As Specified And As Directed. 42 M&L Preparation Of New Wooden Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Complete All As Specified And As Directed. 43 M&L Preparation Of New Steel Surfaces Of Any Description, Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Redoxide Primer Complete All As Specified And As Directed. 44 M&L Preparation Of New Steel Surfaces Of Any Description, Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paintcomplete All As Specified And As Directed. 45 E / M Worksm&L For Point Wiring With 1.5 Sqmm ( Nominal Area ) , Pvc Insulated, Frls Multistranded, Single Core Unsheathed, Copper Conductor Cables Drawnthrough And Including Pvc Conduit With Allaccessories Concealled In Wall And Fixed To Ceiling Etc. With And Including 1.5 Sqmm ( Nominal Area ) Pvc Insulated, Frls Unsheathed, Multi Stranded, Single Core, Copper Cable Green In Colour As Earth Continuity Wire Connecting To Common Earth Dolly Including Sunken Boxes Of Suitable Size With 3 Mm Thick Hylam Sheet Top Cover Fixed With Suitable Size Of Brass Screws For Mounting Switches, Sockets, Regulators Etc Complete For One Light / Fan / Bell Point Controlled By One , One Way Switch All As Specified And Directed. ( A ) One Light Point / Fan Point / Exhaust Point Controlled By One Single Pole One Way Switch. ( Note:- Wiring Shall Be Done In Colour Coding ) 46 All As Per Item No 45 Hereinbefore Butone 3 Pin Socket Outlet 5 Amps Independent Boardcomplete All As Specified And As Directed. 47 All As Per Item No 45 Hereinbefore But One 3 Pin Socket Outlet 5Amps On The Same Board With Other Switches Complete All As Specified And As Directed. 48 All As Per Item No. 45 Here-In-Before But One 15 Amps Socket Outlet Point Controlled By One Single Pole Switch One Way And Wiring With 2.5 Sqmm Pvc Insulated, Stranded, Unsheated Copper Conductor On Independednt Board With Continuous Earth Wire Of Size 2.5 Sqmm Green Colours Pvc Insulated, Unsheathed, Stranded Copper Conductor Cable. 49 All As Per Item No. 45 Here-In-Before But One 15 Amps Socket Outlet Point Controlled By One Single Pole Switch One Way And Wiring With 4.0 Sqmm Pvc Insulated, Stranded, Unsheated Copper Conductor On Independednt Board With Continuous Earth Wire Of Size 4.0 Sqmm Green Colours Pvc Insulated, Unsheathed, Stranded Copper Conductor Cable. 50 S&F Switch Piano Flush Type 6 Amps, Single Pole One Way, White In Colour, Duly Isi Marked Complete All As Specified And Directed. 51 S&F Switch Piano Flush Type 20 Amps, Single Pole One Way, White In Colour, Duly Isi Marked Complete All As Specified And Directed. 52 S&F Socket Outlet2 In 1, 5 Pin, 6 Amps, White In Colour, Duly Isi Marked Complete All As Specified And Directed. 53 S&F Socket Outlet, Uni, 2 In One10 Amps & 20 Amps, White In Colour, Duly Isi Markedcomplete All As Specified And Directed. 54 S&F Ceiling Rose Surface Type, 240 Volts, 50 Hz, 6A, Pilot 3 Plate, White In Colour, Bakelite 65 X 50Mm, 3 Terminals Dulyisi Marked Complete All As Specified And Directed. 55 S&F Rotary Stepped Type Electronic Fan Regulator For Ceiling Fan 1200 / 1400Mm Size, 240 Volts, 6 Amps, 100W, White In Colour, Duly Isi Marked Complete All As Specified. 56 S&F Lamp Angle Holder ( Plastic Ring ) , 240 Volts, 50 Hz, 6A, White In Colour, Duly Isi Marked Complete All As Specified And Directed. 57 S&F Led Bulb Of 9 Watt, B22, 6500K All As Specified And Directed. 58 S&F 20W, 6500 K, 4 Feet Led Square Tube Light Fitting, Energy Efficient Fixed To Wall / Ceiling Etc Complete All As Specified And As Directed. 59 S&F Led Sleeky Bldg Street Light ( Lens ) Fitting Of 35 Watts, 6000K, Including Gi Bracket Bend To Shape Made Out Of Gi Pipe Light Grade Of 25 Mm, Size Up To 1.2 Mtr Long Etc Complete With Ms Clamps Made Of 25X3mm Ms Plate, Duly Painted With Two Coats Of Aluminium Paint With Nuts / Bolts / Washers And All Fixing Arrangements To Wall / Pole, Including Connecting Up With 2 Core Copper Flexible Wire Of Size 23 / 00.0076 Complete All As Specified And As Directed. 60 S&F Exhaust Fan Heavy Duty With Louvers Complete Of Sweep Size 300Mm, 900 Rpm, Single Phase, With Bolts, Nuts And Washers, Size Of The Bolt 15 Cm Long 12Mm Dia Embedded In The Wall Including Provision Of Pvc Flexible Copper Cable Of Size 23 / 00.0076 Three Core From Ceiling Rose To Exhaust Fan Max 1.5 Mtr For Giving Connection Complete All As Specified And As Directed. 61 S&F Ceiling Fan 1200Mm Sweep, Ac Single Phase 230 Volts 50Hz, At Bldgs Upto 5 Mtrs Height, Including Provision Of Flexible Cable 3 Core Copper Conductor Of Size 23 / 0.0076 Of Suitable Length From Ceiling Rose To Ceiling Fan Upto 1.5 Mtr For Giving Connection And All Hanging Arrangement I.E. Standard Down Rod, Hanging Clamp, With Rubber Real Nuts Bolts, Spring Washers And Locking Of Splite Pin, Plastic Canopy With Screw Compete Without Fan Regulator And Marking Of Mes Nos With Black Synthetic Enameled Paint All As Specified And As Directed. 62 S&F Factory Made Sheet Metal Enclosures Double Door Type Made Out Of Crca 1.2 Mm Thick M.S. Sheet, Powder Coated, Partly Embedded In Wall, Ip-43 Protection, Vtpn Db With 200 Amps Rated Bus Bar, 4 Way, 415 Volts, Vertical Type, Dust And Vermin Proof, Suitable For Incorporation Of Mccbs / Mcbs, Factory Made, Including Thermal Based Release Adjustable Type 4 Pole 63 Amps, 50 Hz, 415 Volts With Rupturing Capacity 16 Ka And Making Good Distrubbed Surfaces With Matching Colour, Complete All As Specified And As Directed. 63 S&F Factory Made Sheet Metal Enclosures Double Door Type Made Out Of Crca1.2 Mm Thick M.S Sheet, Powder Coated, Spn Db With 200 Amps Rated Bus Bar, 8 Way, Ip-42 Protection Surface Mounting, 240 Volts, Dust And Vermin Proof, Suitable For Incorporation Of Mcbs Duly Cocealled In Wall, Factory Made, Including Making Good Distrubbed Surfaces With Matching Colour Complete All As Specified And As Directed. 64 S&F Mcb Spn, 40 Amps, 240 Volts, B Series, 10Ka Duly Isi Marked, Complete All As Specified And As Directed. 65 S&F Mcb Sp, 6A-32 Amps, 240 Volts, B Series, 10Ka Duly Isi Marked, Complete All As Specified And As Directed. 66 M&L For Sub Main Wiring With Two Single Core 2X4 Sqmm Pvc Insulated And Unsheathed Stranded Copper Conductoralongwith Earth Wire 4.0 Sqmm Drawn In Including Pvc Rigid Conduit Connected To Main Board Complete All As Specified And Directed ( Note:- Two Runs Cable And One Number Earth Wire And Suitablepvc Conduit Shall Measured Together As Unit Length ) . 67 M&L For Earth Continuity Conductor Or Main Earthing Lead Fixed To Wall On Batten Or Recess Or Chases Or Buried In Ground Or Drawn In Conduit / Pipe Or Fixed To Poles Or Any Other Indicated Situation For Loop Earthing Etc As Required 4 Mm Dia Galvanised Iron Or Steel Wire Complete All As Specified And As Directed. 68 M&L For Earthing Complete With Galvanized Steel Plate Elecrode Of Size60 Cm X 60Cm X 6.0 Mm Thick Burried Directly In Ground Vertically To A Depth Not Less Than 2.5 Mtr Below The Ground Level With Top Edge Of Earth Plate At A Depth Not Less Than 1.5 Mtr Below Ground Level. Earth Plate Surrounded By 15Mm Thick Packed Alternative Layers Of Charcoal Dust And Comman Salt, Earth Lead Gi Wire Of 4Mm Dia ( 8 Swg ) By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanised Iron With Thimbles. The Other End Of Gi Earth Wire Is Connected To Main Switch Board And Protected By Light Grade Gi Pipe Of 15 Mm Bore. Provision Of 20Mm Bore Light Grade Gi Pipe For Watering Including Gi Funnel And Wire Mesh. Pipe Shallbe Provided Vertically Upto Top Level Of Earth Pit And Then Taken Horrizontally To The Earth Pit. Cement Concrete Chamber Of Pcc ( 1:3:6 ) Type C-2 Using 40 Mm Graded Stone Aggregate.The Chamber Shall Be Constructed One Metre Away From Edge Of Earth Pit. 50 Mm Thick Pre Cast Cover Of Cement Conrete ( 1:2:4 ) Type B-1 Using 20 Mm Graded Stone Aggregate And Ms Angle Iron 50 X 50 X 6 Mm Frame Including Two Coats Of Painting Over A Red Oxide To Exposed Steel Surfaces. Excavation In Soft / Loose Soil, Returning Filling And Removal Of Surplus Soil To A Distance Of 50 Mm As Directed And Shown In Electrical Plate No- 3 Of Ssr Part-1 ( 2009 ) . 69 Supplying, Laying, Jointing And Testing Xlpe Insulated, Armoured, Electric Cables ( Heavy Duty ) With Aluminium Conductor, 1100 Volts, Grade Cross Sectional Area 25 Sqmm 4 Core Confirming To Is:7098-1985 Laid In Trenches, In Floor, In Duct, Through Pipes Or Along The Pole Complete All As Specified And As Directed. ( Note:- Excavation & Earth Work, Cable Preotection Coverand Sand Cushion Shall Be Measured &Separately ) 70 M&L Dry And Clean Fine Sand For Cable Cushioningto Underground Cable Protection, Complete All As Specified And As Directed. Note- Punned Down Thickness Shall Be Measured. 71 S&F Cover To Underground Cable With One Layer Of Bricks Using Sub Class ‘B’ Bricks ( Old Size ) Laid Flat Across The Cable Complete All As Specified And As Directed. 72 S&F Mild Steel Galvanised Pipe, Light Grade, 40 Mm Nominal Bore For Passing Of Cable, Fixed To Poles / Walls, Laid Under Floor / Road Crossings, Complete With And Includingclamps Socket & Elbow Etc Complete All As Specified And As Directed. 73 Taking Down Carefully Existig Copper / Alumn Point Wiring For Light / Fan / Bell / Socket 5 / 15 Amp Points Complete Withfitting And Fixtures Such As Switches, Sockets, C / Rosess, Holders And Bracket Fittings With Battens / Conduits / Wires, T / L Fittings And Making Good The Disturbed Surfacesof Walls And Roofs Etc.And To Match With Existing Colour Complete All As Specified And Directed. 74 Taking Down Carefully Unserviceable Main Switches And Distribution Boards With Fuses / McbS ( Single Phase Or Three Phase ) Of Any Capacity Complete All As Specified And As Directed. 75 Taking Down Carefully Old Unserviceable Sub Main Wiring Including Meters And Making Good Disturbed Surfaces And Matching With Existing Complete All As Directed And Specified 76 S&F Bell Push Flush, Type 6 Amp Single Pole One Way, White In Colour, Duly Isi Marked Complete All As Specified And As Directed. 77 S&F Door Bell Ding Dong Single Phase 240 Volts, White In Colour, Duly Isi Marked Complete All As Specified And As Directed. 78 S&F Batten Holder ( With Metal Ring ) , 240 Volts, 50 Hz, 6A, White In Colour, Duly Isi Marked Complete All As Specified And As Directed. 79 S&F Factory Made Three Phase And Neutral Sheet Steel Made Out Of Crca 1.2 Mm Thick, Powder Coated Double Door Vertical Distribution Board 4 Way, Dust And Vermin Proof, Fitted With Two Cover, One Screwed Cover For Incoming And Outgoing Mcbs And The Second For Protection Of Mcbs Fitted With Colour Bus Bar Of Capacity 200 Amps, Neutral Link, Earth Bar And Din Rail Suitable For Use On 240 / 415V, 50Hz Supply, Vtpn Db, Partly Immersed In Wall, Including Of Mccb 4 Pole Adjustable Thermal & Fixed Magnetic Type 100 Amps, 50Hz, 415 Volts With Rupturing Capacity 16 Ka And Making Good Distrubbed Surfaces With Matching Colour, Complete All As Specified And As Directed. 80 S&F Mcb Spn, 40A - 63Amps, 240 Volts, C Series, 10Ka Duly Isi Marked, In Mcb Db, Complete With Connection Testing And Commissioning Complete All As Specified And As Directed. 81 M&L For Sub Main Wiring With Two Single Core 2X6 Sqmm Frls Insulated And Unsheathed Stranded Copper Conductoralongwith Earth Wire 6.0 Sqmm Frls Drawn In Includingrigid Conduit Connected To Main Board Complete All As Specified And Directed ( Note:-Two Runs Cable And One Number Earth Wire And Suitableconduit Shall Measured Together As Unit Length ) . 82 Cutting Holes Making Good The Distributed Surface, Grouting Nuts For Fixing Of Exhaust Fans Complete All As Specified And Directed. 83 M&L For Disconnecting Electric Meter Of Any Cap And Refixing Same After Rewiring, In Meter Box Including Connection Complete All As Specified And As Directed. 84 S&F Sheet Metal Meter Box Single Door Minimum Size 35X50x25cm For Electric Meter Factory Made Of Ms Sheets / Crca Sheet Duly Painted With Powder Paint And Door Hinged Locking Arrangement Conforming To Is 5039 Of 1983. The Electric Meter / Switch Box Shall Be Suitable For Fixing One Number Of Electric Meter And Knock Out Holes For Incoming And Outgoing Cable. Before The Powder Paint Process The Sheet Steel Shall Go Through The Anti Corrosion Conditioning Process In Not Less Than Seven Tank Process. Concealed In Wall, Including Making Good Distrurbed Surfaces With Matching Colour, Complete All As Specified And As Directed. 85 Fixing Or Hanging Only Ceiling Fans Height Upto 3Mtr To 5 Mtrs Ceiling Height Of Bldg Including Three Core Fr Pvc Insulated & Overall Round Sheathed Flexible With Pvc, Colour Of Cores Are Red, Black & Yellow / Green Is For Earthing. Sheath Colour Is Black Of Cable Size 23 / 0.0076 Complete All As Specified. ( Note : Ceiling Fans Obtained / Taking Down From Item Sr No.73 As Above )

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	26-Nov-2022	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	03-12-2022

INR 500 /-

INR 43500.0 /-

INR 21.75 Lakhs /-

Name of Work: Provn of MOB Eqpt Stores for Med Regt (Fd Regt) and Rewiring of bldg No. P-67 (12 Qtrs) OR Md Accn of Engr Regt at 550 Acre under GE (East ) Ferozepur Cantt

Sl. No.	Item Description
1	B/R Work Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, for lying cables etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and as directed.
2	M&L cement concrete in foundations 1:4:8 type D-2, (40mm graded stone aggregate as in sub base of foundation, filling and mass concrete complete all as specified and as directed.
3	M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.
4	Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil complete all as specified and as directed.
5	Removing excavated material/soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
6	Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finishedsurface of concrete complete all as specified and as directed.
7	Use and waste of Formwork to sides of pillars, posts, struts, piers, columns etc rough finishedsurface of concreteall as complete all as specified and as directed.
8	Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)rough finishedsurface of concrete complete all as specified and as directed.
9	Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm widerough finishedsurface of concretecomplete all as specified and as directed.
10	Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. rough finishedsurface of concretecomplete all as specified and as directed.
11	M&L RCC design mix M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
12	M&L RCC design mix M-25 (using 20mm graded stone aggregate) columns, pillars, piers, posts and struts complete all as specified and as directed.
13	M&L RCC design mix M-25 (using 20mm graded stone aggregate) as in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and as directed.
14	M&L RCC design mix M-25 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
15	M&L mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
16	All as per item No 15 above but 5mm dia and over upto and incl 10mm dia in stirupps,spacers and binders etc complete all as specified and as directed.
17	M&L Rendering 12mm thickin cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
18	M&L Rendering 15mm thickin cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
19	M&LRendering 10 mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and evenwithout using extra cement complete all as specified and as directed.
20	Supply only integral water proofing compound conforming IS 2645-1975 of approved make complete all as specified and as directed.
21	M&L Preparation of newly plastered surfaces of walls etc, and applying three coats of white wash complete all as specified and as directed.
22	M&L Preparation of new plastered surfaces of ceiling & applying two coats of white wash complete all as specified and as directed.
23	M&L Applying double coats of bitumen elastometric waterproof coating as on damp proof course/roof including cleaning of surfaces complete all as specified and as directed.
24	M&L 75mm thick cement concrete 1:4:8 type C-2, using 40mm graded brick aggregate as in sub floor, sub base etc, finishing surfaces rough to receive the topping layer all as complete all as specified and as directed.
25	M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed.
26	M & L sand filling under floors or in foundations including watering and consolidationcomplete all as directed by Engieer-in-charge .
27	M&L 75mm thick Cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection,surfaces finished even and fair without using extra cementincluding provision of construction joints complete all as specified and as directed.
28	M&L 75 mm thick cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in floor topping, surface finished even and smooth without using extra cement complete all as specified and as directed.
29	M&L Glass dividing strips, 3 mm thick and 38mm width of strip, inserted in position, conform to design complete all as specified and as directed.
30	S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mmincluding one shop coat of red oxide primer complete all as specified and as directed.
31	S&F of 40mm thick flush door shutter of solid core construction with particle board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneerwith lipping /frame to match complete all as specified and as directed.
32	S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
33	S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and withoutglazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
34	S&F Steel ventilators fixed type complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed.
35	Mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified and as directed.
36	S&F mild steel door handles, stove enameled black,medium wt 125 mm long and fixed with steel screws complete all as specified and as directed.
37	S&F mild steel barrel tower bolts, stove enameled black, with bright bolt, medium weight 150 mm long and fixed with steel screws complete all as specified and as directed.
38	S&F 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified and as directed.
39	S&F 3 mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads(supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and as directed.
40	S&F Stainless steel wire cloth0.56 mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staplescomplete all as specified and as directed.
41	M&L Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc,complete all as specified and as directed.
42	M&L Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
43	M&L Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and as directed.
44	M&L Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and as directed.
45	E/M Works M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated,FRLS multistranded, single core unsheathed, copper conductor cables drawnthrough and including PVC conduit with allaccessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, FRLS unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switch all as specified and directed. (a)One light point / fan point/ Exhaust point controlled by one single pole one way switch.(Note:- wiring shall be done in colour coding)
46	All as per item No 45 hereinbefore butOne 3 pin socket outlet 5 amps independent boardcomplete all as specified and as directed.
47	All as per item No 45 hereinbefore but One 3 pin socket outlet 5amps on the same board with other switches complete all as specified and as directed.
48	All as per item No. 45 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.
49	All as per item No. 45 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.
50	S&F Switch piano flush type 6 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.
51	S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.
52	S&F Socket outlet2 in 1, 5 pin, 6 Amps, white in colour, duly ISI marked complete all as specified and directed.
53	S&F Socket outlet, UNI, 2 in one10 Amps & 20 Amps, white in colour, duly ISI markedcomplete all as specified and directed.
54	S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals dulyISI marked complete all as specified and directed.
55	S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked complete all as specified.
56	S&F Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.
57	S&F LED bulb of 9 watt, B22, 6500K all as specified and directed.
58	S&F 20W, 6500 K, 4 feet LED Square tube light fitting, energy efficient fixed to wall/ ceiling etc complete all as specified and as directed.
59	S&F LED sleeky bldg street light (Lens) fitting of 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 complete all as specified and as directed.
60	S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and as directed.
61	S&F ceiling fan 1200mm sweep, AC single phase 230 Volts 50Hz, at Bldgs upto 5 mtrs height, including provision of flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan upto 1.5 mtr for giving connection and all hanging arrangement i.e. standard down rod, hanging clamp, with rubber real nuts bolts, spring washers and locking of splite pin, plastic canopy with screw compete without fan regulator and marking of MES nos with black synthetic enameled paint all as specified and as directed.
62	S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partly embedded in wall, IP-43 protection, VTPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof, suitable for incorporation of MCCBs/ MCBs, factory made, including thermal based release adjustable type 4 pole 63 Amps, 50 Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified and as directed.
63	S&F Factory made sheet metal enclosures double door type made out of CRCA1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall, factory made, including making good distrubbed surfaces with matching colour complete all as specified and as directed.
64	S&F MCB SPN, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and as directed.
65	S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and as directed.
66	M&L for Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductoralongwith earth wire 4.0 sqmm drawn in including PVC rigid conduit connected to main board complete all as specified and directed (Note:- Two runs cable and one number earth wire and suitablePVC conduit shall measured together as unit length).
67	M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire complete all as specified and as directed.
68	M&L for Earthing complete with galvanized steel plate elecrode of size60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) .
69	Supplying, laying, jointing and testing XLPE insulated, armoured, electric cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 25 sqmm 4 core confirming to IS:7098-1985 laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and as directed. (Note:- Excavation & earth work, cable preotection coverand sand cushion shall be measured &separately)
70	M&L Dry and clean fine sand for cable cushioningto underground cable protection, complete all as specified and as directed. Note- Punned down thickness shall be measured.
71	S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and as directed.
72	S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/ walls, laid under floor/ road crossings, complete with and includingclamps socket & elbow etc complete all as specified and as directed.
73	Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete withfitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfacesof walls and roofs etc.and to match with existing colour complete all as specified and directed.
74	Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB"s (single phase or three phase) of any capacity complete all as specified and as directed.
75	Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified
76	S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and as directed.
77	S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and as directed.
78	S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and as directed.
79	S&F Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply, VTPN DB, partly immersed in wall, including of MCCB 4 pole adjustable thermal & fixed magnetic type 100 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified and as directed.
80	S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning complete all as specified and as directed.
81	M&L for Sub main wiring with two single core 2x6 sqmm FRLS insulated and unsheathed stranded copper conductoralongwith earth wire 6.0 sqmm FRLS drawn in includingrigid conduit connected to main board complete all as specified and directed (Note:-Two runs cable and one number earth wire and suitableconduit shall measured together as unit length).
82	Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.
83	M&L for disconnecting electric meter of any cap and refixing same after rewiring, in meter box including connection complete all as specified and as directed.
84	S&F Sheet metal Meter Box single door minimum size 35x50x25cm for electric meter Factory made of MS sheets/CRCA sheet duly painted with powder paint and door hinged locking arrangement conforming to IS 5039 of 1983. The electric meter/switch box shall be suitable for fixing one number of electric meter and knock out holes for incoming and outgoing cable. Before the powder paint process the sheet steel shall go through the anti corrosion conditioning process in not less than seven tank process. Concealed in wall, including making good distrurbed surfaces with matching colour, complete all as specified and as directed.
85	Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified. (Note : Ceiling fans obtained/ taking down from item Sr No.73 as above)