Periodical Service Through Mechanical Equipment Of Bldg No P-257 At Hq Tc ( U ) - &L For Complete Removal Of Existing Treatment By Scrapping With Machnical Wall Sander ( Having Mechanical Vacuum Mechanism ) Having Rpm Not Less Than 1500, Sanding Pad Of 80 Grit Having Dia Of 7 / 9 To Make The Surface Free From Dust, Loose Paint Etc. By Skilled Labour Complete All As Directed. 2 Taking Down Cement Or Cement Lime Plaster, Any Description On Brick Or Stone Walls, Etc. Including Racking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc.All As Specified.Note: All Debris And Rubbish Shall Be Removed From Mod Land During Or At The End Of Each Working Period At His Risk And Cost In Accordance With All Applicable Federal, State, And Local Regulations. 3 M&L For Rendering 15Mm Thick On Fair Faces Of Brick Works Or Concrete Surfaces In Cm 1:6 And Finished Even And Smooth Without Using Extra Cement All As Specified. 4 M&L For Rendering 15Mm Thick Cement Plaster In Cement Morter 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement. 5 M&L For Applying Two Coatss Of Exterior Emulsion ( Weather Paint ) Along With One Coat Of Exterior Wall Primer All As Specified And Directed. 6 M&L Forapplying Two Coats Of Oil Bound Distemper With One Coat Of Wall Putty Alone With One Coat Of Interior Wall Primer On Any Surfaces As Specified And Directed Irrespective Of Wall, Staircase And Ceiling All As Specified And Directed. Note : - Sanding Of Surface To Be Done By Mechanical Sander With 1500 - 2700 Rpm, With Internal Dust Extraction System For Clean Environment Certified By Paint Manufacturer.Note For Item No 1, 5 And 6 ( A. ) The Work Pertaining To Periodical Services & Water Proofing Shall Be Executed From Authorized Applicator Through Manufacturer Of Which The Materials .I.E. Paint, Distemper, Cement Base Paint, Putty Etc. Is Proposed To Be Used By The Contractor And Approved By Garrison Engineer. ( B. ) The Contractor Shall Upload Along With The Documents Under Cover-I, ‘Memorandum Of Understanding’ ( Mou ) With Only One Manufacturer Mentioned In The Contract, Failing Which The Bid Shall Be Liable To Be Rejected. 7 Preparation Of Old Painted Surface Of Any Description Not Otherwise Described Steel And Iron Surface Over 10 Cm Width Or Girth And Applying One Coat Of Synthetic Eanmel Paint. 8 One Coat Of Synthetic Enamel Paint On Old Painted Wooden Surfaces Of Any Description Over 10Cm Width Or Girth Including Necessary Preparation Of Surfaces All As Specified And As Directed. 9 Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts, If Required On Vertical Stone Masonry Wall: Hooks ( Stay ) , Heavy, For Large Gates; Hook And Pintle Hinges:Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps;Hold Fasts; Wall Ties; Hooks Forhanging Fans; Plain Angle Cleats For Securing Purlins To Woodtrusses Or Rafters; Knee Pieceinserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165 10 S&F Pvcin Repair ( Swr ) Pipes 150Mm Bore, Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Wall, Floor As Directed 11 S&F In Repair150mm Bore Pvc ( Swr ) Bends Of Any Radius All As Specified. 12 Taking Up Or Down 15Mm Bore Steel Tubing And Connection Including Cleaning For Refixing Or Removal To Store All As Specified And As Directed.. 13 All As Item No 12 Above But 20Mm Bore 14 All As Item No 12 Above But 25Mm Bore 15 Refixing 15 Mm Bore Old Steel Tubing And Connections In New Or Old Position ( Walls, Ceiling, Floors, Etc. ) 16 Refixing 20 Mm Bore Old Steel Tubing And Connections In New Or Old Position ( Walls, Ceiling, Floors, Etc. ) 17 Refixing 25 Mm Bore Old Steel Tubing And Connections In New Or Old Position ( Walls, Ceiling, Floors, Etc. ) 18 S&F Tubes 15Mm Bore, `Medium Grade Galvanised, With All Fitting And Fixed Complete To Walls And Ceilings Or Laid In Floors. 19 All As Item No 18 Above But 20Mm Bore 20 All As Item No 18 Above But 25Mm Bore 21 Hacking Out Old Broken Glass From ( Any Thickness Size Quality Or Descriptionfrom Metal Frame Including Punching Or Drilling Out Old Glazing Pins / Spring Clips And Providing And Fixing New Ones 22 S&F Sheet Glass, Of 4Mm Thick Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.5 Sqm In Each Pane. 23 Demolition Of Cement Concrete ( Unreinforced ) Of Any Description And In Any Position Not Otherwise Specifically Provided For 24 M&L Cement Concrete 1:2:4, Type B1 ( 20Mm Graded Stone Aggregate ) As In Padding Over Roof, Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges
