Tender For Urgent Maintenance Of Road From Belonia-Barpathari Road To Ubc Nagar Road Via Munda Para (L-4.00 Km) During The Year 2022-23 From Ch.2.75 Km To Ch.4.00 Km (Group No-Ii).
Tender Value
19.40 Lakhs
Estimated cost
Bid Submission
01 Dec 2022
0 days left
EMD
38802
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Urgent Maintenance Of Road From Belonia-Barpathari Road To Ubc Nagar Road Via Munda Para (L-4.00 Km) During The Year 2022-23 From Ch.2.75 Km To Ch.4.00 Km (Group No-Ii). Metalling, Grouting, Patch-Carpeting, Seal Coating, Road Side Katcha Drain Etc.
BOQ
| Sl. No. | Item Description |
| 1 | WBM Grading 3Providing, laying, spreading and compacting jhama brick aggregates of specific sizesto water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KNin stages to proper grade and camber, applying and brooming,binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Technical Specification Clause 405.I. By Manual Means |
| 2 | Prime CoatMedium porosityProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.20 kg/sqm using mechanical means as per MoRD Technical Specification Clause 502 |
| 3 | Patch repairing / Maintenance of bituminous surface road using Jhama brick aggregate & Viscosity Gradedbitumen (VG-30)Repairing pot-holes and making up small depressions with ramming or power rolling after removal/ disposal of disintegrated materials within a lead of 50 m, cutting pot holes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any other appropriate method including screening, cleaning of aggregates; and filling up with jhama chips using bitumen of VG-30 @54 Kg per m3 of loose volume of jhama brick chips, after applying tack coat of bitumen on sides and bottom @ 0.75 kg/sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/sqm of prepared road surface as per direction of the Engineer-in-Charge and all as per MoRD technical specification Clauses 1900, 502, 503 and 504. |
| 4 | Tack CoatProviding and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface treated with primer and cleaned with Hydraulic broom as per MoRD Technical Specification Clause 503. |
| 5 | Tack Coat using hot straight run bitumen of grade VG-30 on bituminous surfaceProviding and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: on bituminous surface @ 0.50 Kg/Sqm. |
| 6 | 20 mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade / modified bitumen) BinderProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508Case - I: By Manual MeansBitumenofVG-30 |
| 7 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.A. By Manual Meansi) Case - IV : Type D (premix with fine sand)a) Bitumen of VG-30 |
| 8 | Surface DrainsConstruction of unlined surface drains of average cross- sectional area 0.40 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307.a) Surface Drains in Ordinary Soili) Manual Means |
AI Tender Summary
Tender Timeline
Nov 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender