Tender For Construction Of Dilapidated Boundary Wall And Repair Of School And Hostel Building At Gandhinagar Sevashram In Dhamanahandi G.P. Of Kotpad Block
Tender Value
5.07 Lakhs
Estimated cost
Bid Submission
16 Nov 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kotpad → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Dilapidated Boundary Wall And Repair Of School And Hostel Building At Gandhinagar Sevashram In Dhamanahandi G.P. Of Kotpad Block Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Earth work in excavation of foundation in all kinds of soil within50M initially lead and 1.50M initially lifts including rough dressingand breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.03Mtr in depth & levelling bed etc complete as directedby the Engineer-in-Charges. |
| 3 | Providing and laying sand in foundation and plinth filling with Sand in 9” thick layers of approved quality free from dust, dirt and other foreign materials to proper line and grade, watering and ramming etc complete with all lead, lifts de-lifts including labour charges with cost, conveyance, tax and royalty of all materials, labour, T&P and other incidental charges etc complete as per direction of Engineer-in-Charges. |
| 4 | Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm (3/2”) size Clean hard black crusher broken granite metal of approved quality from approved quarry including hosting lowering and laying in layers not exceeding 15cm (6”) thick to the required level, ramming watering and curing etc complete including all cost, conveyance, taxes and royalties of materials and labour with T&P required for the work etc complete. |
| 5 | Fly Ash Brick Masonry work in cement motor (1:4) in Foundation and Plinth using Fly Ash brick of 9” size having crushing strength not less than 75Kg per Sq. Cm. including splays cutting, circular molding, chamfering and corbelling, watering and curing etc complete as per direction of Engineer-in-Charges. |
| 6 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC – 21 – 1987 and IS – 456 – 1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete - Column Footing |
| 7 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC – 21 – 1987 and IS – 456 – 1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete - Plinth |
| 8 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC – 21 – 1987 and IS – 456 – 1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete - Column and Beam |
| 9 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC – 21 – 1987 and IS – 456 – 1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete - Drain Base |
| 10 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC – 21 – 1987 and IS – 456 – 1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete - Drain Wall |
| 11 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC – 21 – 1987 and IS – 456 – 1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete - Cover Slab |
| 12 | Supplying fitting and placing uncoated High Yield Strength Deformed Bar Reinforcement complete as per drawing and technical specification and placing in proper position as required for R.C.C. Work including cost, conveyance, taxes of Steel and cost of binding wire 18 to 20 gauge and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 13 | Fly Ash Brick Masonry work in cement motor (1:6) in Superstructure using Fly Ash brick of 9” size having crushing strength not less than 75 Kg per Sq. Cm. including splays cutting, circular molding, chamfering and corbelling, watering and curing etc complete as per direction of Engineer-in-Charges. |
| 14 | 12mm (½”) thick Cement Plaster in C.M. (1:6) finished smooth to brick walls after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 15 | 16mm (5/8”) thick Cement Plaster in C.M. (1:6) finished smooth to brick walls after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 16 | 20mm (3/4”) thick Cement Plaster in C.M. (1:4)finished smooth to Stone Work/Over Roof Slabafter raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 17 | Dismantling and removing 2.5 cm thick artificial stone flooringincluding stacking theuseful materials for reuse and removing the debris within 50 metres lead including all cost of labour with T&P required for the work etc complete. |
| 18 | Fixing of Vetrified tiles in floors treads or steps and landingon 25mm thick bed of cement mortar 1:1 joined with to match the shades of the tiles including including rubbing and polishing , watering and curing etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 19 | Fixing Vetrified tiles in dados skirting and risers of steps on 12mm thick bed of cement mortar 1:3 joined with to match the shades of the tiles including including rubbing and polishing , watering and curing etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 20 | 2.5cm (1\") thick A.S. Flooring in C.C. (1:2:4) using 12mm size H.G.C.B. Chips including watering and curing etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 21 | Dismantling and Removing doors, windows and ventilators including removal of frame, hinges, fastening, stacking theuseful materials for reuse and removing the debris within 50 metres lead including all cost of labour with T&P required for the work etc complete. |
| 22 | Manufacturing and Supplying of M.S. Door, Window, Ventilator and Grill Gate made up all round angular frame size 35x35x5mm, Door and Window angular frame size 25x25x3/5mm with 20 gage C.R. Sheet supporting flat size 25x8mm and 18x5mm including fitting of clamp, hinges, tower bolt, aldropsincluding all cost, conveyance tax of materials and labour with T&P required for the worketc complete |
| 23 | Labour Charges for fitting and fixing of M.S. Door, Window, Grill Gate and Grills including all cost of Labour with T&P required for the work etc complete. |
| 24 | Painting Two Coats (Enamel Paint) with any approved shade on New Iron Door and windows over a coat of Primer Paint including all cost, conveyance, tax of materials and labour with T&P required for the work etc complete. |
| 25 | Dismantling or Removing the A.C. or G.C.I. Sheet roofing after careful removingincluding stacking theuseful materials for reuse and removing the debris within 50 metres lead including all cost of labour with T&P required for the work etc complete. |
| 26 | Supplying fitting and fixing of Durashine Sheet of 0.50mm (TCT) 1072mm width of roofing made up TATA including all cost, conveyance, tax of materialsand labour with T&P required for the work etc complete. |
| 27 | Cost of M.S. Trusses & Purline(65mmx65mmx6mm) |
| 28 | Labour Charges for Fitting and Fixing of Trusses and Purline(65mmx65mmx6mm) to the RoofHoisting joists and trusses and placing in position including all cost of labour with T&P required for the work etc complete. |
| 29 | Distempering two coats to walls with distemper of approved shade on new work including all cost of materials, scaffolding, labour, watering & curingT&P etc complete as per direction ofEngineer-in-charge. |
| 30 | Providing & Painting with two coats to the entire outside surface with Weather Coat of any approved make to the outer surface after scraping and cleaning the surface over one coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curingT&P etc complete as per direction ofEngineer-in-charge. |
| 31 | Dismantling and removing 2.5cm thick grading concrete from roof slab, cleaning the surface, lowering and removing the debris within 50m lead including all cost of labour with T&P required for the work etc complete. |
| 32 | 4cm (1.5”) thick Grading Concrete over roof slab in Cement Concrete (1:2:4) 6mm (1/4”) size Clean hard black crusher broken granite Chips of approved quality from approved quarry including hosting lowering and laying in layers ramming watering and curing etc complete including all cost, conveyance, taxes and royalties of materials and labour with T&P required for the work etc complete. |
| 33 | Supplying all materials, labour with T&P for Fixing water closet, squatting pan(Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded incement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification (excluding cost of Earth Work in trenches) |
| 34 | Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge - 110mm dia Door Tee |
| 35 | Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge -110mm dia Bend/Tee |
| 36 | Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge -110mm dia Cowl |
| 37 | Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge - 110mm dia Noni Trap |
| 38 | Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge -110mm dia Socket |
| 39 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes - \"(i) 90mm dia PVC Pipe |
| 40 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes - 110mm dia PVC Pipe |
| 41 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) - \"(i) 32mm dia PVC Pipe |
| 42 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) - \"(ii) 25mm dia PVC Pipe |
| 43 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) - \"(iii) 20mm dia PVC Pipe |
| 44 | Supplying and Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 ofthe following nominal sizes as per specification complete. |
| 45 | Surface wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.- Short Point |
| 46 | Surface wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.- Medium Point |
| 47 | Surface wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.- Long Point |
| 48 | Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. - 2x1.50Sqmm Wire |
| 49 | Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.- 2x2.50Sqmm Wire |
| 50 | Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. - 2x4.0Sqmm Wire |
| 51 | Cost of Led Light |
| 52 | Cost of Tube Light 32 W |
| 53 | Cost of Fan |
AI Tender Summary
Tender Timeline
Nov 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender