Military Engineer Services-MES has published Tender For Provision Of Parking Shedat Various Location At Afssr, Addn Altn To Shed Behind P1 Building At Afssr, Provn Of Interlocking Tiles Paver Block On Shoulders From Main Gate To Vsv Shoping Complex At Afssr, Provn Of Deficient Summer Appliances Name. Submission Date for this Tender is 08-12-2022. Air Conditioner Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-12-2022 |
| Sl. No. | Item Description |
| 1 | Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removingdebris to a distance exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed |
| 2 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishing, copings, roof padding, staging of water tank, benching etc and similar nature of worksincluding finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and as directed by Engineer-in-Charge. (i) Ratesinclude to carried out the work on roof slab of building & nothing extra shall be admissible on this account). |
| 3 | M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and as directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately |
| 4 | M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent as approved by Engrineer-In-Charge as in Roof portion where leakage and seepage are noticed including preparing of surface by removing existing treatment complete all as specified and as directed by approved applicater. Note :- Authorised applicater shall be approved by GE. |
| 5 | Taking down cement plaster on brick or concrete surfaces of ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed. |
| 6 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 7 | M&L for Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed. NOTE: WPC shall be Measured and Paid under appropriate Item. |
| 8 | M&L for rendering 15 mm thick onbrick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extracement complete all as specified and as directed. |
| 9 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts inpatches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and as directed. |
| 10 | S&F Aluminium anodizedpowder coated Window Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/centralRail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. |
| 11 | S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed. |
| 12 | M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) indoor and windows frames any size single or double rebated, as required etc complete all as specified and as directed. |
| 13 | M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed. |
| 14 | M&L for preparing newly plastered surface& applying two coat of oil bound distemper white or any tint over a coat of primer etc)complete as specified and as directed . |
| 15 | M&L for preparing newly Plastered surfaces of Walls and applying Two Coats of Acrylic Weather Coat Exterior Paintwith approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 16 | M&L for preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 17 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 18 | M&L forbrick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM1:6 complete all as specified and directed. |
| 19 | S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 20 | S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete all as specified and as directed. |
| 21 | S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, withbolt complete all as specified and as directed. |
| 22 | Supply & fixingButt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 23 | S&F Mild steel pressed handles, oval type, stove enamelled black 150mm size cast type anodised complete all as specified and as directed. |
| 24 | S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed. |
| 25 | M&L for mild steel framed work as in grills, grating, doors, etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed baluusters wals ways, railing framed wor of water tans and similar work etc complete all as specified and as directed. |
| 26 | Supply only integral water proofing compound complete all as specified and as directed. |
| 27 | Excavation in post holes (or similar holes) in Soft /loose soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed. |
| 28 | Excavation in post holes (or similar holes) in hard /dense soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed. |
| 29 | M&L for providing cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregates) as in foundation filling and mass concrete ,lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , on roofs , not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, etc including necessary formwork complete all as specified and as directed by Engineer-in-Charge. |
| 30 | S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates complete all as specified and as directed. |
| 31 | M&L for preparation of newsurface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specified and as directed. |
| 32 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed by Engineer-in Charge |
| 33 | Surface not exc 30 cm deep and averaging 15 cm deep and getting out in soft/lose soil etc complete all as specified and as directed by Engineer-In-Charge. |
| 34 | Rolling and consolidating formation surface with 8 to 12 tonne power rollerto required gradient and camber etc complete all as specified and as directed. |
| 35 | M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roadsetc complete all as specified and as directed by Engineer-In-Charge. |
| 36 | M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and as directed. |
| 37 | M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006of 60 mm thick, M- 35 grade to match with grey cement and pigment etc complete all as specified and as directed. |
| 38 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, as in floor,including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 39 | Removing excavatedsoil to a distance exc 1.50 Km mtr but not exceeding 5.00 KM mtrand depositing where directed etc complete all as specified and as directed. |
| 40 | M&L for exterior grade, coloured glossyfinish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick( as approvedby GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid overincluding 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed. |
| 41 | M&L for Providing and laying at or near ground level precast factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 42 | M&L for preparation of new concrete suface of any description over 10cm girth or width and applying two coat of synthetic enamel over a coat of prime complete all as specified and as directed. |
| 43 | M & L for removing the exisintg kerbstone and filling the debris in sunk portion , well rammed and compacted the surface and refixing the kerbstone at existing surface over PCC complete all as specified and as directed. Note : PCC shall be measured and paid separetely. |
| 44 | M& L for 100mm cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in flooring laid in alternate panels not exc 4sqm each and joints filled with sealing compound complete all as specified and directed by engineer-in-charge. |
| 45 | Supply and install hi wall split Type Airconditioner with indoor & outdoor unit complete with Inverter Technology, 3D Airflow, power chill operation,cordless remote control unit and with in built air ioniser,PM 2.5 Filter for better indoor air quality with 5 star rating of capacity 2 TR with precharged CFC free refrigerant all as specified and as directed by Engr-in-Charge. (Hitachi Cat part no. 5 Star Copper (2021 Range) Kiyora 5100X RMRG524HEEA OR equivalent out of makes specified in list of makes. |
| 46 | Supply and install hi wall split Type Airconditioner with indoor & outdoor unit complete with Inverter Technology, 3D Airflow, power chill operation,cordless remote control unit and with in built air ioniser,PM 2.5 Filter for better indoor air quality with 5 star rating of capacity 1.5 TR with precharged CFC free refrigerant all as specified and as directed by Engr-in-Charge. (VOLTAS Cat part no. 5 Star Copper (2021 Range) 185V CZR (Split AC (White) OR equivalent out of makes specified in list of makes. |
| 47 | Supply & installed voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 150 V to 285 V with output voltage stabilized at 230 V accuracy of 2.5 % , 4-6 sec initial delay, Smart Digital Display System and capacity of size 5 KVA complete all as specified and as directed. (V-Guard cat part No. VND 500 Plus) OR equivalent out of makes specified in list of makes. |
| 48 | Supply & installed voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 150 V to 285 V with output voltage stabilized at 230 V accuracy of 2.5 % , 4-6 sec initial delay, Smart Digital Display System and capacity of size 4 KVA complete all as specified and directed. (V-Guard cat part No. VND 400 Plus) OR equivalent out of makes specified in list of makes. |
| 49 | S&F MS stand factory made for installation of condensing units of 1.5 /2 TR split AC on the wall/roof/ground duly power coated all as per site requirement complete all as specified and as directed by Engr in Charge |
| 50 | Taking down carefully old copper/alluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket tube light fitting of any type, Bulk head fittingetc segregation serviceable fitting/fixture and keep them safe custody for reuse and removing materials from the site and making good disturbed surface of walls&floors etc as per existing specification complete all as specified as directed. |
| 51 | M&L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multi standard copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed in walls/Ceiling and Terminated to sunken box of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly and taking down old one complete all as specified and directed for the following:- |
| 52 | a) One light point controlled by one way modular switch 6 Amps |
| 53 | b) One ceiling fan point /Exh fan point controlled by one 6 Amps one way switch and regulator |
| 54 | c) One bell point controlled by one bell push |
| 55 | d) One3 pin 6 Amps switch socket outlet point on independent board |
| 56 | f) One 3 pin socket outlet 6 Amps on the same board with other switches. |
| 57 | M&L for point wiring complete with 2.5 Sqmm PVC insulated unsheathed single core multi standard copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed on walls/Ceiling and Terminated to sunken box of modular type including white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly and taking down old one complete all as specified and as directed. |
| 58 | S&F modular switchone way 6 amps 1 module complete all as specified and as directed. |
| 59 | S&F modular switchone way 16 amps 1 module complete all as specified and as directed. |
| 60 | S&F modular fan step type regular two module complete all as specified and as directed. |
| 61 | S&F modular socket out let 6 Amps 230 volts AC 3 pin multipurpose type complete all as specified and as directed. |
| 62 | S&F modular socket out let 6/16 Amps multipurpose complete all as specified and as directed. |
| 63 | S&FModular Bell push5 Ampsone module complete all as specified and as directed. |
| 64 | S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts including taking down old unserviceable complete all as specified and as directed. |
| 65 | S&F buzzer electric AC, 230 Vcalling bell including taking down old unserviceable complete all as specified and as directed. |
| 66 | S&F LEDlight fitting 4"x20 W complete with inbuilt drive and LED tube including taking down old unserviceable complete all as specified and as directed. |
| 67 | S&F LED light fitting 2"x10 complete with drive and LED tube including taking down old unserviceable complete all as specified and as directed. |
| 68 | S&F (600mm x 600mm) recess mountedfull panel LED luminairewith white powdercoatedhousing acting as heat sink and frame in CRCAsheet, high efficiency LED grade diffuser , in built electronic driver duly wired up to terminal block, power consumption< 35/36W, luminaire lumen > 3500lm and system efficiency >120lm/W, CRI>80, LED Make:- Nichia/ Cree/ Everlite / Eclison/ Osram/ Lumiled with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class 1, colour temp -5700K, Ingress protection IP 20, , driver efficiency >85%, 50,000 burning hours(min) as per L70 criteria, ambient temp 0 to 500C, power factor >0.95, THD < 10% , surge protection in CM -3 KV, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard, with LM79 & LM80 certification including taking down old unserviceable light fitting of any description complete all as specified and directed. Make:- Havels Model No. CRCO10R038HP57GL1 or equivalent out of makes specified in list of makes. |
| 69 | S&FMCB single pole 5 Amp to 40 Amps including taking down old unserviceable complete all as specified and as directed. |
| 70 | S&FMCB SPN 240 Volts 40 Amps including taking down old unserviceable complete all as specified and as directed. |
| 71 | S&FMCCB 4 pole415 V 63 A Hz fixed type with rupturing capacity 16 KA including taking down old unserviceable complete all as specified and as directed. |
| 72 | S&FMCCB 4 pole415 V 125 A Hz fixed type with rupturing capacity 16 KA including taking down old unserviceable complete all as specified and as directed. |
| 73 | S&F sheet metal enclosure MCB DB TPN double door type AC 240 V 4 way with 200 Amps rated bus bar,verticalincluding taking dwon old one complet and making good of distructed surface including taking down old unserviceable complete all as specified and as directed. |
| 74 | S&F sheet metal enclosure MCB DB SPN double door type AC 240 V 8 way with 200 Amps rated bus bar,verticalincluding taking dwon old one complet and making good of distructed surface including taking down old unserviceable complete all as specified and as directed. |
| 75 | S&F SP&N sheet metal enclosure 240 V with atwo pin and earth plog and sicket with one singal pole MCB 20 Ampsincluding taking down unservicable sheet metal enclosure complete all as directed by Engr-in-Charge. |
| 76 | M&L for sub main wiring complete with 2 runs of 4 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB"sincluding provision of 1 run of 4.0 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s complete all as specified and as directed. |
| 77 | M&L for sub main wiring complete with 4 runs of 6.0 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB"sincluding provision of 2 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete all as specified and as directed. |
| 78 | M&L in Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground levelwith top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 4mmGI earth Wireby means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc completeall as shown in electrical plate No 5, connected to earthing test point complete including testing on complete all as specified and as directed. |
| 79 | S&F copper tubing with rubber insulation suitable for 1.5/2.0 TR Split ACsize 1/2" all as specified and as directed by Engineer in Charge. |
| 80 | S&F copper tubing with rubber insulation suitable for 1.5/2.0 TR Split ACsize 1/4" all as specified and as directed by Engineer in Charge. |
| 81 | S&F drain pipes 20mm dia heavy duty rigid PVC from indoor unit to exit point as per design including accessories clamps fastner complete all as specified and as directed by Engineer in Charge. |
| 82 | S&Fof cable PVC insulated unarmored for connection 4 Sqmm 3 core copper conductor duly drawn from indoor to outdoor and indoor unit to power point in PVC Flexible pipes complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
