Tender For Repairs To Road At Centeral Zone Of Md And Otm At Binnaguri Mil Stn Under Ge North Binnaguri
Tender Value
94 Lakhs
Estimated cost
Bid Submission
24 Nov 2022
0 days left
EMD
1.66 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
binnaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Road At Centeral Zone Of Md And Otm At Binnaguri Mil Stn Under Ge North Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | M&L Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm using VG-10 bitumen, putting in premixed bituminous macadam using VG-30 bitumen, well rammed and sealed with binder 9.8 kg per 10 sqm using VG-10 bitumen, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm, complete all as specified and directed by Engineer-in -charge. |
| 2 | M&L Premix bituminous macadam using bitumen of grade VG-30 @ 4% by weight of total mix, laid/rolled and compacted with 8 to 10 tonne power roller compacted to required gradient and camber (consolidated thickness 75mm or less), complete all as specified and directed by Engineer-in -charge.NOTE : (i) No extra allowances shall be admissible to the contractor if the bitumen content is required more than 4% by the weight of total mix as per approved design and on minus side it will be recovered @ Rs. 50.00/kg of bitumen irrespective of any purchase price.The contractor shall quote the rate accordingly. (ii) Before carrying out bituminous macadam initial level final level both shall be taken and accordingly level sheet and level register shall be prepared.Level sheet shall be signed by the Engineer-in-Charge and contractor which shall be produced during technical check of RAR / Final Bill. |
| 3 | M&L Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and Applying evenly a priming/tack coat with cationic bitumen (RS-1) @ 2.50 Kg per 10 sqm by machanical sparayer over black top surfaces, complete all as specified and directed by Engineer-in -charge. |
| 4 | M&L for bituminous premix asphaltic semi dense concrete 40mm consolidated thickness (minimum) with 5.5% binder of paving bitumen Gde-VG-30 by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and pre-mixed material laid with mechanical paver, finished including rolling to required gradient and camber with 10 to 12 tonne power roller to required compaction in the relevant clauses of SSR Part-I (2009), complete all as specified and directed by Engineer-in -charge.Note : (a) The actual binder contain used shall be as per optimised content based on approved Job mix formula irrespective of whatever indicated above.(b)Rate deemed to be included for making good of any undulation/damages in wearing surfaces, where semi dense asphaltic concrete to be laid.(c)Price adjustment shall be done on minus side (without permissible tolerance on minus side) with reference to binder content indicated above and actually to be used in the work.(d) Price adjustment for paving bitumen shall be done @ Rs. 50.00 per KG for any variation on minus side irrespective of actual purchase rate. However, no adjustment for variation on plus side will be made. |
| 5 | M&L for 2.5mm thick painting to road surfaces as in lines, dashes, arrows, letters, zebra crossing etc on roads, pavements and like with thermoplastic road marking paint @ 5 kg/Sqm and applying glass beads @ 300 gms/Sqm over painted surfaces while the painted surfaces are hot by mechanical means including cleaning surfaces, complete all as specified and directed by Engineer-in -charge.(Note. The painting shall be carried out through mechanical appliances by the company\"s approved applicator) |
| 6 | S&F in repair of dual direction road studs, cats eye of impact ABS plastic / polycarbonate studs 100x90 mm having colour (white, red, yellow) to a side provided with steel zink plated nails of dia 4mm and length 60mm for fixing to road by hammering with adhesive including taking down old one), complete all as specified and directed by Engineer-in -charge. |
| 7 | Taking down existing solar stud 125x125x25mm made out of aluminium alloy 100% water proof design according to IP67 requirements in accordance to IS 12063:1987, flash rate not less than 1HZ, bearable weight 10 Tons with the following specification and complete all as specified and directed by Engineer-in -charge.(a)Solar Power monocrystal solar panel.(b)Type of battery one high capacity Ni-Cd rechargeable.(c)View distance: Approximately 1000 mtrs. (d)LEDs-01 mm 3 peices each side and total 6 pieces are used high brightness of different colours back up 72 hours of continous at nights.(e)Red colour.Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ. |
AI Tender Summary
Tender Timeline
Nov 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 26, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender