Tender For Furniture Arrangement Of Skill Development Center Formaharashtra Animal &Fishery Sciences University, Nagpur, nagpur-Maharashtra

Tender For Furniture Arrangement Of Skill Development Center Formaharashtra Animal &Fishery Sciences University, Nagpur For Furniture Arrangement Of Skill Devlopment Center For Maharashtra Animal And Fishery Sciences University Nagpur , Furniture For Skill Development Center -Hostel , Executivestable @ 1800Lx900dx750ht Providing & Fixing Of Table @ 1800Lx900d X750ht - Top & Gable End To Be Made Of Laminate 1 Mm Thick Of Approved Quality And Just Dial Medium Density Fiberboard ( Mdf ) Sheet18 Mm Thick Finish With Soft Water Fall Edges & Curved Panel & Decorated Anodized Section Modesty Panel To Be Made Of 18 Mm Thick Medium Density Fiberboard With Pvc Edge Band 1 Mm Thick As Per Drawing And Design Provided. The Drawer Made From 18 Mm Plywood And Having Good Quality Of Channels Assembly Of Like Hettich / Hafle / Godrej Make Etccomplete. , Pedestal Unit @ 420Lx450dx650ht Providing & Fixing Of Pedestal @ 420Lx450dx650ht :- To Be Made Out Of Complete Laminate 1Mm Thick Of Approved Quality On 18 Mm Medium Density Fiber Board The Acefinish Consist Of Three Drawers As Per Drawing Made In 18 Mm Medium Density Fiber Board And The Drawer Channel , Lock , S.S. Handle Of Approvedlike Hettich / Hafle / Godrej Make Etcand Propertly Fixed In Position Etc Complete , Credestal @ 1200Lx450lx650ht Providing & Fixing Of Low Height Credestal @ 1200L X 450D X 650H :- To Be Made Out Of Laminate 1 Mm Thick Finish ( 2 Openable Shutter & 3 Drawer Pedestal In Between ) Drawers As Per Drawing Made In 18 Mm Medium Density Fiber Board And The Drawer Channel , Lock , S.S. Handle Of Approvedlike Hettich / Hafle / Godrej Make And Propertly Fixed In Position Etc Completeas Per Drawing. , Providing & Arrangement Of High Back Chair - Tiltechanism With Multilocking, High Density Cushion On Seat Composite Leather With Metallic Silver Finish Base And Arms With P.U.Castors Gaslift For Height Adjustment. Seat & Back Assembly : The Seat And Back Shall Be Made Of Pu Foam Of Density 45 ± 2 Kg / M3 Upholstered With Changeable Fabric Upholstery Covers ( As Per Requirement ) . Back Size: 480 Mm. ( W ) X 550 Mm ( H ) Approx. Seat Size: 480 Mm ( W ) X 550 Mm. ( D ) Approx. B. Base : Five Prong Made Of Black Color Reinforced Pu Plastic With Nylon Wheels And Pneumatic Up & Down With One Point Locking Mechanism. C. Handle Armrest : The Armrest Shall Be Gas-Assisted Injection Molded From Black Polypropylene. D. Revolving & Tilt : Chair Should Have A Full 360O Revolving Mechanism With 17 Deg. Maximum Tilt Only And Tilt Tension Adjustment Facility E. Height Of Chair : Maximum And Minimum Height Is Approx. Is 930Mm And 830 Mm Respectively F. Powder Coating : Other Visible Metal Parts And Seat Base Support Metal Parts Should Be Powder Coated With Dry Film Thickness More Than 50 Microns, Salt Spray Test To Withstand More Than 1000 Hours, Pencil Scratch Hardness More Than 2H, Adhesion As Per Din 53152 Standards. The Powder Coating Shall Be Of Good Quality ( 7 Process ) To Ensure Good Adhesion Of Life Of The Coating G. Colour Of Seat Upholster : The Colour Of Seat Fabric Are Mentioned In The Purchase Order H. Fabric : Composite Leather With Silver Finish Shall Have Quality Of User Friendly For Maintain Cleanliness By Simple Vacuuming , Providing & Arrangement Ofmid Back, Normal Syncro Mechanism , Fixed Armrest , Gas Lift For Seat Height Adjustment, Standard 5-Prong / Nylon Base With Leather Upholsteryseat & Back Assembly : The Seat And Back Shall Be Made Of Pu Foam Of Density 45 ± 2 Kg / M3 Upholstered With Changeable Fabric Upholstery Covers ( As Per Requirement ) . Back Size: 480 Mm. ( W ) X 550 Mm ( H ) Approx. Seat Size: 480 Mm ( W ) X 550 Mm. ( D ) Approx. B. Base : Five Prong Made Of Black Color Reinforced Pu Plastic With Nylon Wheels And Pneumatic Up & Down With One Point Locking Mechanism. C. Handle Armrest : The Armrest Shall Be Gas-Assisted Injection Molded From Black Polypropylene. D. Revolving & Tilt : Chair Should Have A Full 360O Revolving Mechanism With 17 Deg. Maximum Tilt Only And Tilt Tension Adjustment Facility E. Height Of Chair : Maximum And Minimum Height Is Approx. Is 930Mm And 830 Mm Respectively F. Powder Coating : Other Visible Metal Parts And Seat Base Support Metal Parts Should Be Powder Coated With Dry Film Thickness More Than 50 Microns, Salt Spray Test To Withstand More Than 1000 Hours, Pencil Scratch Hardness More Than 2H, Adhesion As Per Din 53152 Standards. The Powder Coating Shall Be Of Good Quality ( 7 Process ) To Ensure Good Adhesion Of Life Of The Coating G. Colour Of Seat Upholster : The Color Of Seat Fabric Are Mentioned In The Purchase Order H. Fabric : Composite Leather With Silver Finish Shall Have Quality Of User Friendly For Maintain Cleanliness By Simple Vacuuming , Public Seating Chair. - 3 Seater Providing And Fixing 3 Seater Public Seating Chair Made Of Complete Metal With Legs In Crome Finish And Seates In Silver Powder Coating Finish. Seat Width: Each Chair Is 52 Cms. Seat Bent Line: 90Cm Colour: Silver+Black With Chrome Arm Length: 37Cm, Width: 31Cm, Hight: 4Cm. Leg Length: 54Cm, Height: 22Cm Without Ss Base Height. Beam: 1.7Mm Thickness With Durable Screw Tube. Total Out To Out Width: 180 Cms, Height: 80 Cms, Depth: 64 Cms. Weight: 30-35 Kgs. Or Depend On Your Choice, Perforated Powder Coated Metal Chairs. Chair-Seat : High Quality Cold Rolled Sheet Is Perforated, Pressed And Welded To Form The Shape. The Surface Is Then Cleaned With Acid To Remove Rust And Electrostatically Coated With Epoxy Power And Then Cured Under Heat To Allow It To Form A “Skin.” Thickness- 1.2 Mm Decorative Edge : High Quality Metal Is Bent To From The Shape. The Surface Is Then Polished And Chrome Plated. Arm / Leg : High Quality Mild Steel Sheet Is Pressed And Welded To Form The Shape. The Surface Is Then Polished And Chrome Plated. Thickness – 1.2Mm Cross Bar : High Quality Cold Rolled Sheet Is Pressed And Welded To Form The Shape And The Surface Is Then Cleaned With Acid To Remove Rust And Powder Coated. Thickness – 2Mm Customization : Seat : Choice Of Single Seater To Four Seater. Color : Choice Of Colors ; Chrome, Ilver Grey, Blue, Cherry And Black. Dimensions :Width : 690 Mm Height : 790Mmlength : 610Mm Per Seat Approx. , Single Bed @ 2025 Lx 1000 Dx 650Hproviding And Fixing Single Bed Ofsize 2025 Lx1000 Dx650 H With Mattressof Approved Make Such As Sleepwell / Kurlon / Durofix Ofthickness 100 Mm With Composite Fome Having Density 40 Thickness 80 Mmand Soft Foam Of Density 32 And Wraped In Culting Cloth And Pillow With Cover And Bed Sheet. Under Structure: The Legs Are Made Of Square Tube Of Size 25 X 25Mm Made Out100 Mm Made Up Of Ms With A Thickness Of2.00 Mm. The Legs Should Have Corner Brackets Welded To It At Two Levels. The Corner Brackets Are Made Of 2Mm Thick Crca Having A L Shaped Structure To Join The Side Panels And Headboard To The Leg. Three Nos. Of Horizontal Stiffeners Are Provided At Equal Intervals. The Stiffeners Are Made Of Square Tube Of Size 25 X 25Mm Made Out Of M.Steel With A Thickness Of 2.00Mm. The Middle Horizontal Stiffener Has A Leg Attached To It To Transfer The Load To The Ground And Add To The Strength And Stability Of The Complete Structure. This Leg Is Also Made Of Square Tube Of Size 25 X 25Mm Made Out Of Ms With A Thickness Of 2.00 Mm. All Metal Components To Undergo 7 Tank Treatment Process And Should Be Powder Coated To The Thickness Of Minimum 50 Microns Dft.Edge Banding. The Overall Width Of The Side Panel Is 150Mm. The Side Panels Have 18Mm Thick Medium Density Fiberboardbaton Running For Required Length To Add Rigidity To The Structure. Head Board :- The Head Board Is Made Up Of 18Mm Thick Medium Density Fiber Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Head Board Size To Be Considered As 1000 X 650Mm. And Etc .Complete Foot Board :- The Foot Board Is Made Up Of 18Mm Thick Medium Density Fiber Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Head Board Size To Be Considered As 1000 X 450Mm. Bed Base: - The Bed Base Is Made Up Of 12Mm Thick Medium Density Fiber Board With Both Side White Laminate. And Etc .Complete Side Panel: The Side Panels Are Made Up Of 18Mm Thick Medium Density Fiber Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc , Sofa Set 3+1+1 Providing & Fixingsofa Set 3+1+1 Brown And Cream Leather Dimension Length: 182.5 ( Cms ) Breadth ( Cms ) : 100 ( Cms ) Height ( Cms ) : 100 ( Cms ) Weight ( Kilograms ) : 66 ( Kilogram ) Seating Capacity: Five Seat The Base And Frame Of Sofamade From 18 Mm Plywood And The Coushioning Of 40 Density Foam Of Thickness 75Mm And Soft Foam Of 25Mm On It For Seat And For Back 50 Mm 32 Density Foam And 25Mm Soft Foam With Hand Rest And Seating Back Pillows And Then Finishing With Brown And Cream Leathershould Be Placed With Proper Adhesives Etc Complete , Tea Table - 900Mm X 750Mm X 450Mm For M.S. Ante Chamber Providingandfixingofteatable900mmx750mmx450mmwith12mmthickcoloureitched Tempered Glass With Bevelled Drawing Made Outof 18Mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thick Veneer Withmelamine Polish Or1.0Mm Thick Fore Mica Etc. Complete , Tea Table - 900Mm X 750Mm X 450Mm For M.S. Ante Chamber Providingandfixingofteatable900mmx750mmx450mmwith12mmthickcoloureitched Tempered Glass With Bevelled Drawing Made Outof 18Mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thick Veneer Withmelamine Polish Or1.0Mm Thick Fore Mica Etc. Complete , Providingandfixingverticalblindsofapprovedmakeandshadeof100mm Regularfabricwithpowder Coatedaluminiumchannelwithteltingpvcchain&Bottomweightplatewithallnecessaryfixturesand Fitting Etc. Complete. ( Sample To Be Final By Engineer In-Charge Prior Execution Of Work ) , Full Height Steel Storage @ 900Lx450dx2000htproviding Andfixing Openable Steel Storage Of 900Lx450dx2000 Ht., With4adjustable Shelves, Complete Body & Shutter Made In0.8 Mm Thick & Topin 2 Mm Thick Crca, 4 Shutter To Be Mounted With The Help Of Sot Closing Cup Hinges, Approvedlike Hettich / Hafle / Godrej Make Etcand 4 Adjustable Levelers, Enitrewith Rod Type 2 Way Lock Of Like Hettich / Hafle Make Etc, Door External Handle, 50 Mm Skirting Panel, Knock Down Design.Etc Complete. , Providing&Arrangementofmidback, Ecos - Type Chair Having Chromium Plated Base S Shape With Heavy Duty Metal Tube Of Thickness 10 Mm X 25 Mm The Chair Seatingthe Seat And Back Shall Be Made Of Pu Foam Of Density 45 ± 2 Kg / M3 Upholstered With Changeable Fabric Upholstery Covers ( As Per Requirement ) . Back Size: 480 Mm. ( W ) X 550 Mm ( H ) Approx. Seat Size: 480 Mm ( W ) X 550 Mm. ( D ) Approx. The Armrest Shall Be Gas-Assisted Injection Moulded From Black Polypropylene. Colour Of Seat Upholster : The Colour Of Seat Fabric Are Mentioned In The Purchase Order H. Fabric : Composite Leather With Silver Finish Shall Have Quality Of User Friendly For Maintain Cleanliness By Simple Vacuuming And Etc Complete , Free Standing Table @ 1200 Lx 600 Dx750 Ht Providing Andfixing Table Ofsize 1200X600x750mm.Top:Made From 25Mm Laminatedmedium Density Fiber Board.All Edges Are Covered By 2 Mm. Thk. Pvc Edge Bands Glued By Hot Melt Glue Applied By Auto Edge Banding Machine. Legs : C Shape Made From Crca Sheet With Powder Coat Finish. Modesty Panel : Made From 18Mm Both Side Laminated Medium Density Fiber Board.All Edges Are Covered By 0.8Mm Pvcedge Bands Glued By Hot Melt Glue Appliedbyautoedgebandingmachine. Keyboardtray ( Withoutmousetray ) :- Metal Powdercoated-Blackcolor, Cputrolley:- Metalpowdercoated-Blackcolor, 3Drawer Pedestal Unit Having Overall Size 392L X 450D X 680Ht. Mm. With Central Lock And Key. Drawers And Body Are Complete Metal With Powder Coat Finish, Facia In 18 Mm Laminated Medium Density Fiber Board Andetc Complete,

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	14-Nov-2022	BOQ CORRECTION	Financial Bid	18-11-2022

INR 4800 /-

INR 80000.0 /-

Refer document

Name of Work: FURNITURE ARRANGEMENT OF SKILL DEVLOPMENT CENTER FORMAHARASHTRA ANIMAL &FISHERY SCIENCES UNIVERSITY, NAGPUR

Sl. No.	Item Description
1	Furniture for Skill Development Center -Hostel
2	Executive"sTable @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900D x750HT - TOP & GABLE END to be made of Laminate 1 mm thick of approved quality and Just dial Medium Density Fiberboard (MDF) Sheet18 mm thick finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Medium Density Fiberboard with PVC edge band 1 mm thick as per drawing and design provided. The drawer made from 18 mm plywood and having good quality of channels assembly of like Hettich /Hafle/ Godrej make etccomplete.
3	Pedestal Unit @ 420Lx450Dx650HT Providing & Fixing of PEDESTAL @ 420Lx450Dx650HT :- To be made out of Complete Laminate 1mm thick of approved quality on 18 mm Medium Density Fiber board the acefinish consist of three Drawers as per drawing made in 18 mm Medium Density Fiber board and the drawer channel ,lock ,S.S. Handle of approvedlike Hettich /Hafle/ Godrej make etcand propertly fixed in position etc complete
4	Credestal @ 1200Lx450Lx650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H :- To be made out of Laminate 1 mm thick Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between )Drawers as per drawing made in 18 mm Medium Density Fiber board and the drawer channel ,lock ,S.S. Handle of approvedlike Hettich /Hafle/ Godrej make and propertly fixed in position etc completeas per drawing.
5	Providing & Arrangement of High Back Chair - TILTECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. Seat & Back Assembly : The seat and back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers (as per requirement). Back Size: 480 mm. (W) X 550 mm (H) Approx. Seat Size: 480 mm (W) X 550 mm. (D) Approx. b. Base : Five prong made of black color reinforced PU plastic with Nylon wheels and pneumatic up & down with one point locking mechanism. c. Handle armrest : The armrest shall be gas-assisted injection molded from black polypropylene. d. Revolving & tilt : Chair should have a full 360o revolving mechanism with 17 deg. maximum tilt only and tilt tension adjustment facility e. Height of chair : Maximum and minimum height is approx. is 930mm and 830 mm respectively f. Powder coating : Other visible metal parts and seat base support metal parts should be powder coated with dry film thickness more than 50 microns, Salt Spray test to withstand more than 1000 hours, Pencil scratch hardness more than 2H, Adhesion as per DIN 53152 Standards. The powder coating shall be of good quality (7 process) to ensure good adhesion of life of the coating g. Colour of seat upholster : The colour of seat fabric are mentioned in the purchase order h. Fabric : Composite leather with silver finish shall have quality of user friendly for maintain cleanliness by simple vacuuming
6	Providing & Arrangement ofMid Back, Normal Syncro Mechanism , Fixed Armrest , Gas lift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather UpholsterySeat & Back Assembly : The seat and back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers (as per requirement). Back Size: 480 mm. (W) X 550 mm (H) Approx. Seat Size: 480 mm (W) X 550 mm. (D) Approx. b. Base : Five prong made of black color reinforced PU plastic with Nylon wheels and pneumatic up & down with one point locking mechanism. c. Handle armrest : The armrest shall be gas-assisted injection molded from black polypropylene. d. Revolving & tilt : Chair should have a full 360o revolving mechanism with 17 deg. maximum tilt only and tilt tension adjustment facility e. Height of chair : Maximum and minimum height is approx. is 930mm and 830 mm respectively f. Powder coating : Other visible metal parts and seat base support metal parts should be powder coated with dry film thickness more than 50 microns, Salt Spray test to withstand more than 1000 hours, Pencil scratch hardness more than 2H, Adhesion as per DIN 53152 Standards. The powder coating shall be of good quality (7 process) to ensure good adhesion of life of the coating g. Colour of seat upholster : The color of seat fabric are mentioned in the purchase order h. Fabric : Composite leather with silver finish shall have quality of user friendly for maintain cleanliness by simple vacuuming
7	Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. Seat width: Each Chair is 52 cms. Seat Bent Line: 90cm Colour: Silver+Black with Chrome Arm Length: 37cm, Width: 31cm, Hight: 4cm. Leg Length: 54cm, Height: 22cm without SS base Height. Beam: 1.7mm Thickness with Durable Screw Tube. Total Out to Out Width: 180 cms, Height: 80 cms, Depth: 64 cms. Weight: 30-35 Kgs. or Depend on your Choice,Perforated Powder Coated Metal Chairs. Chair-seat : High quality cold rolled sheet is perforated, pressed and welded to form the shape. The surface is then cleaned with acid to remove rust and electrostatically coated with epoxy power and then cured under heat to allow it to form a “skin.” Thickness- 1.2 mm Decorative Edge : High quality metal is bent to from the shape. The surface is then polished and chrome plated. Arm / Leg : High quality mild steel sheet is pressed and welded to form the shape. The surface is then polished and chrome plated. Thickness – 1.2mm Cross bar : High quality cold rolled sheet is pressed and welded to form the shape and the surface is then cleaned with acid to remove rust and powder coated. Thickness – 2mm Customization : Seat : Choice of single seater to four seater. Color : Choice of colors ; Chrome, ilver Grey, Blue, Cherry and black. Dimensions :Width : 690 mm Height : 790mmLength : 610mm per seat approx.
8	Single Bed @ 2025 LX 1000 DX 650HProviding and fixing Single Bed ofSize 2025 Lx1000 Dx650 H with mattressof approved make such as Sleepwell /Kurlon /Durofix ofthickness 100 mm with composite fome having density 40 thickness 80 mmand soft foam of density 32 and wraped in culting cloth and pillow with cover and bed sheet. Under structure: The legs are made of Square tube of size 25 x 25mm made out100 mm made up of MS with a thickness of2.00 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of M.Steel with a thickness of 2.00mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 2.00 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick Medium Density FiberboardBaton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Medium Density Fiber board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. and etc .complete Foot Board :- The foot board is made up of 18mm thick Medium Density Fiber board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Medium Density Fiber board with both side White laminate. and etc .complete Side Panel: The side panels are made up of 18mm thick Medium Density Fiber board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC
9	Sofa Set 3+1+1 Providing & fixingSofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms)Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat The base and Frame of sofamade from 18 mm plywood and the coushioning of 40 density foam of thickness 75mm and soft foam of 25mm on it for seat and for back 50 mm 32 density foam and 25mm soft foam with hand rest and seating back Pillows and then finishing with brown and cream leathershould be placed with proper adhesives etc complete
10	Tea Table - 900mm X 750mm X 450mm for m.s. ante chamber ProvidingAndFixingOfTeaTable900mmX750mmX450mmWith12mmThickColourEitched Tempered Glass With Bevelled Drawing Made OutOf 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thick Veneer withmelamine polish or1.0mm Thick Fore Mica etc. complete
11	Tea Table - 900mm X 750mm X 450mm for m.s. ante chamber ProvidingAndFixingOfTeaTable900mmX750mmX450mmWith12mmThickColourEitched Tempered Glass With Bevelled Drawing Made OutOf 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thick Veneer withmelamine polish or1.0mm Thick Fore Mica etc. complete
12	ProvidingandFixingVerticalBlindsofapprovedMakeandshadeof100mm regularfabricwithpowder coatedaluminiumchannelwithteltingPVCchain&bottomweightplatewithallnecessaryfixturesand fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)
13	Full Height Steel Storage @ 900Lx450Dx2000HTProviding andfixing Openable Steel Storage of 900Lx450Dx2000 ht.,with4adjustable shelves,Complete body & shutter made in0.8 mm thick & Topin 2 mm thick CRCA, 4 Shutter to be mounted with the help of sot closing cup hinges, approvedlike Hettich /Hafle/ Godrej make etcand 4 adjustable levelers, enitreWith rod type 2 way lock of like Hettich /Hafle make etc, door External handle, 50 mm skirting panel, Knock down design.etc complete.
14	Providing&ArrangementofMidBack,ECOS - type chair having chromium plated base S shape with heavy duty metal tube of thickness 10 mm x 25 mm the chair seatingThe seat and back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers (as per requirement). Back Size: 480 mm. (W) X 550 mm (H) Approx. Seat Size: 480 mm (W) X 550 mm. (D) Approx. The armrest shall be gas-assisted injection moulded from black polypropylene. Colour of seat upholster : The colour of seat fabric are mentioned in the purchase order h. Fabric : Composite leather with silver finish shall have quality of user friendly for maintain cleanliness by simple vacuuming and etc complete
15	Free Standing Table @ 1200 Lx 600 Dx750 HT Providing andfixing Table ofSize 1200x600x750mm.Top:made from 25mm LaminatedMedium Density Fiber board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side Laminated Medium Density Fiber board.All edges are covered by 0.8mm PVCedge bands glued by hot melt glue appliedbyautoedgebandingmachine. KEYBOARDTRAY(WITHOUTMOUSETRAY):- Metal PowderCoated-BlackColor,CPUTROLLEY:- MetalPowderCoated-BlackColor,3DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm Laminated Medium Density Fiber board andetc complete,