|
| 1 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. |
| 2 | 12 mm cement plaster of mix(1) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 3 | 6 mm cement plaster of mix In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) |
| 4 | Removing dry/oil bound distemper water proofing cement paint and the like by scrapping, sand pering and preparing the surface smooth including necessaryrepairs to scratches etc. as required. |
| 5 | Providing & apoplying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even & smooth complete. |
| 6 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture[Payment shall be made after submission of Test Certificate issued by the Manufacturer](i) on new work ( two or more coats applied @ 1.67 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. |
| 7 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge.(normally two coats to be provided) |
| 8 | Painting with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. |
| 9 | Painting with synthetic enamel paint (two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade(Payment shall be made after submisasion of Test certificate issued by the manufacturer). |
| 10 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : Two or more coats on new work |
| 11 | Wall painting with plastic emulsion paint (one or morecoats ) of required colour of approved brand andmanufacture on old work to give an even shadeincluding preparation of surface as required completeas per direction of the Engineer in charge. |
| 12 | Supplying and filling in plinth, under floor, foundations etc. withsand (fine) from local quarry with all lifts including spreading inhorizontal layers, watering, grading to required slope, ramming,consolidating and compacting each layer by using platecompactor or by any suitable method complete. |
| 13 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level(i) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size) |
| 14 | Firstclass brick work in foundation and plinthincluding cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 15 | Providing and fixing double action hydraulic floor springof approved brand and manufacture ( conforming to IS :6315 )having brand logo embrossed on the body/plate with double spring mechanism and door weight uopto 125 kg for doors,including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishining and cover plates witrh brass pivot and single piece MS sheet outer box with sliude plte etc complete as per direction of the engineer -in -charge.(16.4.1)With stainless steel cover plate minimum 1.25 mm thickness. |
| 16 | Providing and fixing aluminium work for doors,windows, ventilators, stair railing including hand rail andpartitions with extruded built up standard tubularsections/ appropriate Z sections and other sections ofapproved make conforming to IS: 733 and IS : 1285, fixedwith rawl plugs and screws or with fixing clips, or withexpansion hold fasteners including necessary filling upof gaps at junctions, at top, bottom and sides with requiredPVC/neoprene felt etc. aluminium sections shall besmooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle,aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawing and the direction of Engineerincharge.(Glazing and paneling to be paid for separately) :-16.1.1 For fixed portion of approved quality:-16.1.1.1 Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 17 | Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition frames with PVC / neoprene gasket etc. completeas per architectural drawing and the direction of Engineerin-charge :- With glass/ float glass panes of 4.0 m thickness ( weight notless than 10.0 kg / sqm ) |
| 18 | Providing and fixing prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked with one side decorative and other side balancing lamination Grade I,Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethene primer (fittings to be paid separately) (i) 18mm thick |
| 19 | Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842 Plain lining with necessary screws, priming coat on unexposed surface etc., complete. |
| 20 | Providing and fixing aluminium round shape handle ofouter dia 100 mm with SS screws etc. of approved qualitycomplete as per direction of Engineer-in-charge:- Anodised aluminium of grade AC 15 ). |
| 21 | Providing and fixing bright finished brass hangingtype floor door stopper with necessary screws, etc complete |
| 22 | Providing and fixing IS : 3564 marked aluminiumextruded section body tubular type universalhydraulic door closer with double speed adjustmentwith necessary accessories and screws etc. complete. |
| 23 | Providing and fixing bright finished brass handleswith screws etc. complete :125 mm |
| 24 | Providing and fixing bright finished brass towerbolts(barrel type)with necessary screws etc. complete :250 x 10 mm |
| 25 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :Local Teakwood |
| 26 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 27 | Renewing glass panes with putty and nails wherevernecessary, includingracking out the old putty float Glass panes of thickness 4 mm |
| 28 | ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwater pipes (working pressure 4 kg/cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion:Single socketed pipe - 110 mm OD |
| 29 | Providingandfixing on wallface unplasticised - PVCmouldedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS:13592TypeAincludingjointingwith sealringconformingtoIS: 5382 leaving 10 mm gap forthermalexpansion:Coupler:110 mm |
| 30 | Single equal tee with door 110mmx110mmx110mm |
| 31 | (iii) Bend 87.5°110mm |
| 32 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcisternwithmanuallycontrolleddevice(handlelever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :(i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 33 | Providing & Fixing superior quality European type floor mounted coupled W.C with UF soft close seat corner, hinges,fixing accessories set of size 365X630X760 mm,P trap 180 mm with cistern and fittings as per approved desighns as directed by the Engineer-in-charge.(Agt No: 07/CE,PWD(R&B) Approved rate Vide letter No: 23 (71)/SE-II/2011-12 dated 06-07-2018 |
| 34 | Providing and fixing P.V.C. low level flushing cistern withmanually controlled device (handle lever) conforming toIS : 7231, with all fittings and fixtures complete.18.18.1 10 litre capacity-White |
| 35 | Providing & fixing superior quality white vitreous china wash basin with full pedestal in/c making all connection but excluding the cost of fittings Size-610X465X160 mm. |
| 36 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 37 | Providing and fixing C.P. brass stop cock ( concellled)of standard design and approvemake conforming to IS : 893115 mm nominal bore |
| 38 | Providing & fixing superior quality Pillar cock for wash basin of approved brand.(Agt No: 07/CE,PWD(R&B) Approved rate Vide letter No: 23 (71)/SE-II/2011-12 dated 06-07-2018 |
| 39 | Providing and fixing uplasticised PVC connection pipe with PTMT Nuts of approved quality and colour(a) 15 mm nominal bore with45 cm length 45 cm length 15 mm nominal bore |
| 40 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete.Flexible pipe32 mm dia |
| 41 | Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete |
| 42 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction ofEngineer in Charge.Internal work - Exposed on wall |
| 43 | 15 mm dia. Nominal outer dia pipes |
| 44 | (ii) 25 mmnominal outerdia pipes |
| 45 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes& fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete asper direction of Engineer in Charge.External work |
| 46 | (i) 40 mm dia. Nominal outer dia pipes |
| 47 | (ii) 25 mm dia. nominal outer dia pipes |
| 48 | Providing and fixing uplasticised PVC connectionpipe with brass unions : 30 cm length |
| 49 | (i) 15 mm nominal bore |
| 50 | (ii) 20 mm nominal bore |
| 51 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end): |
| 52 | (i) 40 mm nominal bore |
| 53 | (ii) 50 mm nominal bore |
| 54 | (iii) 25 mm nominal bore |
| 55 | Providing and applying Super latex (SBRbased) or equivelent water proofing coating over R.C. C slab with 3 omponents by mixing Super latex or equivelentwater and cemen at 1:2:7 ratio oras per manufacturer reccomendation including cleaning the roof surface with wire brushing and with clean water before application and curing the chemicals by sprinling water for 3 to 5 days after application of water proofing compound complete as per direction of the Engineer-in charge and technical instuction of the manufacturer. |
| 56 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers\" specification and direction of Engineer-In-Charge. |
| 57 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 58 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 59 | Providing & fixing superior quality Bib cock of approved brand with wall flange |
| 60 | Providing & fixing 2-in-1 CPBib cock of JGUAR/PARRYWARE/ROYAL/HINDWARE as selected & approved at VVIP Qtr as per direction of the Engineer-in-charge |
| 61 | Providing & fixing Cardiffhealth foucet of JGUAR/PARRYWARE/ROYAL/HINDWARE as selected & approved with connecting hose as per direction of the Engineer-in-charge. |
| 62 | Proving & fixing superior quality toilet roll holder of approved brand and colour with necessary fittings arrangements complete as per direction of the Engineer-in-charge |
| 63 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded well burnt brick aggregate 20 mm nominal size) |
| 64 | Centering shuttering including struttings, proppingetc. and removal of form work forColumns, piers, abutments, pillaras, posts and struts |
| 65 | Providing structural steel work in single section fixedwith or without connecting plate including cutting,hoisting, fixing in position and applying a priming coatof approved steel primer all complete as required. |
| 66 | Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete |
| 67 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required. |
| 68 | Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I. limpet and bitumenwashers complete.0.63mm thick with zinc coating not less than 275gm/m2 |
| 69 | ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwater pipes (working pressure 4 kg/cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion:Single socketed pipe - 110 mm OD |
| 70 | Providingand fixing wash basinwith C.I. brackets, 15 mm C.P. brass pillartaps,32mmC.P.brasswasteofstandardpattern,including paintingoffittingsandbrackets,cuttingandmakinggoodthewalls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 71 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (i)15 mm nominal bore |
| 72 | Providing and fixing uplasticised PVC connection pipe with PTMT Nuts of approved quality and colour(a) 15 mm nominal bore with45 cm length 45 cm length 15 mm nominal bore |
| 73 | Providing & fitting fixing of 6 feet X 4 feet X 1 inch (thickness) gamair wood/polywood panel board for fitting fixing of elctrical items in/c 2 Nos MS angle post (size 2 inchX2 inchX9 feet)nuts & bolts etc for erection of the same by 1:1.5:3 cement concrete casting (size 2 inchX2inchX9feet)below the groung level and painting two or more coats & plastic paint as per specification and direction of the Engineer -in charge |
| 74 | Providing & fitting fixing of G.I pipes medium class as pert IS:1239 with latest amendment complete with G.I fittings in/C trenching and refilling cutting and making good the walls etc complete as per CPWD Specification and direction of the Engineer in charge (i) 40 mm nominal bore |
| 75 | Making connection of GI distribution branch with GI main of following sizes by providing &fixing tee in/c cutting & Threading the pipe etc complete as per CPWD specification and direction of the Engineer in chargei) 25 mm to 40 mm dia nominal bore |
| 76 | Labour charge for lifting of 20000/15000/10000/7500/5000 GPH capacity water lubricated vertical submersible pump motor ser in/c column pipe assembly by heavy duty chain pilley block as per direction of the Engineer-in-charge. |
| 77 | Providing & fixing of Brass union joints ( medium class )with the pipe line in/c testing of joints complete as per CPWD specification and direction of the Engineer in charge |
| 78 | i) 25 mm dia |
| 79 | ii) 40 mm dia |
| 80 | Supply,fitting & fixing of ball bearing of approved quality |
| 81 | Supply,fitting & fixing of rubber disk for 2 HP pump set of approved quality |
| 82 | Supply,fitting & fixing of couplingfor 2 HP pump set of approved quality |
| 83 | Providing & fixing gun metel gate valve with CI wheel of approved quality (screwed end)(a) 40 mm dia nominalbore |
| 84 | Providing & fixinggun-metal non- return valve of approved quality (screwed end) (a) 40 mm dia nominalbore (vertical) |
| 85 | Supply,fitting & fixing of starter for 5 HP pump set of approved quality |
| 86 | Supply,fitting & fixing of main switch for 5 HP pump set of approved quality |
| 87 | Repair and maintenance of 20/22.5 HP Motor suitable for 10000 GPH capacity submersible pump set by dismantling in/c providing & fixing of PVC (Is: 8783-1978 ) insulated electro grade copper (IS:613-1984) conductor winding in stator & all necessary spare parts and reassembling the same in/c servicing of rotor & necessary trail run as per specification & direction of the Engineer-in-charge. |
| 88 | labour charge for fitting,fixing & lowering of 20000/15000/10000/7500/5000 GPH capacity water lubricated vertical submersible pump motor ser in/c column pipe assembly by heavy duty chain pilley block as per direction of the Engineer-in-charge. |
| 89 | Providing & fixing of 25 mm dia PVC insulated 3 core flat copper cable conforming to relevant IS code for submersible motor all necessary equipments and fittings as required as per specification & direction of the Engineer in charge (i) 4.0 sqmm |
| 90 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.25 HP/18.5 kw Relay range within 13-21 + 10% |
| 91 | Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.(i) 2.0 HP |
