Tender For Proposed Construction At Solid Waste Management Site Marshivani
Tender Value
46.66 Lakhs
Estimated cost
Bid Submission
17 Nov 2022
0 days left
EMD
46661
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ahmedpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Construction At Solid Waste Management Site Marshivani
BOQ
| Sl. No. | Item Description |
| 1 | LEACHATE TANK |
| 2 | Excavation for foundation in earth, soils ofall types sand, gravel and soft murumincluding removing the excavated materialupto a distance of 50 m. beyond the buildingarea and with all lifts stacking and spreadingas directed, dewatering, shoring, structingand preparing the bed for the foundationand necessary back filling, ramming,watering (Including shoring and strutting)etc. complete. (Lift Upto 1.50 Metre) - Spec.No. : Bd.A 1 Page No.259In all types soils/ saturated soil such asmoorum, sand, sandy silt, clay, black cottonsoil, kankar, etc. |
| 3 | Providing dry/ trap/ granite/ quartzite/gneiss rubble stone soling 15 cm to 20cm thick including hand packing andcompacting etc. complete.Providing dry/ trap/ granite/ quartzite/gneiss rubble stone soling 15 cm to 20cm thick including hand packing andcompacting etc. complete. |
| 4 | Providing and casting in situ cementconcrete in M15 of trap/granite/quartzite/gneiss metal for stepsincluding steel centering, plywood/steelformwork, compacting, roughening them ifspecial finish is to be provided, finishinguneven and honeycombed surface andcuring etc. complete. The Cement Mortar1:3 plaster is considered for renderinguneven and honeycombed surface, only.Newly laid concrete shall be covered bygunny bag, plastic, tarpaulin etc. (Woodencentering will not be allowed.),with fullyautomatic micro processor based PLC withSCADA enabled reversible Drum Typemixer ... With natural sand.PCC Below RCC bedRCC Wall Longer Side Outer to Outer (200MM Thick)RCC Wall Shorter Side Inner to Inner (200MM Thick) |
| 5 | Providing and laying in situ cement concreteM20of trap / granite /quartzite/ gneiss metal forR.C.C. work in foundations like raft, stripfoundations, grillage and footings of R.C.C.columns and steel stanchions etc. includingbailing out water, formwork, cover blockscompaction and curing roughening thesurface if special finish is to be provided(Excluding reinforcement and structuralsteel) etc. etc. complete, With fullyautomatic micro processor based PLC withSCADA enabled reversible drum typeconcrete mixer . With natural sand. |
| 6 | Providing and fixing in position TMT FE 500bar reinforcement of various diameters forR.C.C. pile caps, footings, foundations, slabs,beams columns, canopies, staircase, newels,chajjas, lintels pardis, copings, fins, archesetc. as per detailed designs, drawings andschedules. including cutting, bending,hooking the bars, binding with wires or tackwelding and supporting as requiredcomplete. a) For TMT Fe415 steel bars ( If Mild Steel/HYSD steel is tobe used prior permission from S.E. should betaken )Mild steel and Medium Tensile steel bars.TMT bars FE 500 at the rate of 1% of weightof concrete i.e. 78.5 Kg per Cum of Concrete |
| 7 | Processing Shed |
| 8 | Excavation for foundation in earth, soils of all types sand,gravel and soft murum including removing the excavatedmaterial upto a distance of 50 m. beyond the building areaand with all lifts stacking and spreading as directed,dewatering, shoring, structing and preparing the bed for thefoundation and necessary back filling, ramming, watering(Including shoring and strutting) etc. complete. (Lift Upto1.50 Metre) - Spec. No. : Bd.A 1 Page No.259 |
| 9 | Providing and casting in situ cement concrete in M15 of trap/granite/quartzite/gneiss metal for steps including steelcentering, plywood/steel formwork, compacting, rougheningthem if special finish is to be provided, finishing uneven andhoneycombed surface and curing etc. complete. The CementMortar 1:3 plaster is considered for rendering uneven andhoneycombed surface, only. Newly laid concrete shall becovered by gunny bag, plastic, tarpaulin etc. (Woodencentering will not be allowed.),with fully automatic microprocessor based PLC with SCADA enabled reversible DrumType mixer ... With natural sand.PCC for floor (footing) Page No. 23 Item no 2In Column bases. |
| 10 | Providing and laying in situ cement concrete M20 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft,strip foundations, grillage and footings of R.C.C. columns and steelstanchions etc. including bailing out water, formwork, cover blockscompaction and curing roughening the surface if special finish is tobe provided (Excluding reinforcement and structural steel) etc.etc. complete, With fully automatic micro processor based PLCwith SCADA enabled reversible drum type concrete mixer . Withnatural sand.M-15 Grade Concrete (1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) -As per design mix)For Shed ConstructioN Footing BottomFooting Pedestal |
| 11 | Providing and laying in situ cement concrete M20of trap /granite /quartzite/ gneiss metal for R.C.C. work infoundationslike raft, strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc. including bailing out water,formwork, cover blocks compaction and curing rougheningthesurface if special finish is to be provided (Excludingreinforcement and structural steel) etc. etc. complete, Withfullyautomatic micro processor based PLC with SCADA enabledreversible drum type concrete mixer . With natural sand.In Columns |
| 12 | Providing & casting in situ cement concrete M20of trap /granite /quartzite/ gneiss metal for R.C.C. beams andlintels asper detailed designs & drawings or as directed includingcentering, formwork, cover blocks compaction & rougheningthe surface if special finish is to be provided & curing etc.complete. (Excluding reinforcement and structural steel).Withfully automatic micro processor based PLC with SCADAenabledreversible drum type concrete mixer With Crushed sand.In tie beamIn plinth beamIn plinth beam |
| 13 | Providing and casting in situ cement concrete M20of trap/granite/ quartzite/ gneiss metal for R.C.C. slabs and landingscanopy as per detailed designs and drawings includingcentering, formwork, cover blocks compaction finishing theformed surfaces with cement mortar 1:3 of sufficientminimumthickness to give a smooth and even surface or roughening ifspecial finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).With fullyautomatic micro processor based PLC with SCADA enabledreversible drum type concrete mixer With Crushed sand.Total RCC Slab over entire area of shed at bottom |
| 14 | Providing and fixing in position TMT FE 500bar reinforcement of various diameters for R.C.C. pile caps,footings, foundations, slabs, beams columns, canopies,staircase, newels, chajjas, lintels pardis, copings, fins, archesetc. as per detailed designs, drawings and schedules.including cutting, bending, hooking the bars, binding withwires or tack welding and supporting as required complete.a) For TMT Fe 415 steel bars ( If Mild Steel/HYSD steel is tobe used prior permission from S.E. should be taken) @ 1%by weight of Concrete therefore 78.5 Kg/Cum of Concrete |
| 15 | Providing and fabricating structural steel work in rolledsections like joists, channels, angles, tees etc. as perdetailed design and drawings or as directed including cutting,fabricating, hoisting, erecting, fixing in position making riveted/ bolted /welded connections without connecting plates,braces etc. and including one coat of anticorrosive paint andover it two coats of oil painting of approved quality and shadeetc. complete.Structural steel @ as per sheet attached |
| 16 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22B.W.G.) over the ridge hip or valley to galvanized iron sheetroofing including all fastening and bolt galvanised iron screwsand bolts, lead and bitumen washers etc. complete.(Weightof6.8 kg/sq.m.). for ridge and gutter |
| 17 | Providing , laying & fixing ,jointing Supreme Ecodrain110 mm SN 8 NuDrainUpvc pipes or of equivalent make,manufacture as per EN 13476 or equivalent as per I.S.15328with fittings such a bends, tees, coupler, etc, jointing withrubber lubricant including necessary excavation, trenchrefillingwith selective excavated material etc. complete. |
| 18 | Providing second class Burnt Brick masonry withconventional/ I.S. type bricks in cement mortar 1:6 infoundations and plinth of inner walls/ in plinth external wallsincluding bailing out water manually , striking joints onunexposed faces, raking out joints on exposed faces andwatering etc. Complete |
| 19 | Providing rough cast cement plaster externally in two coats toconcrete, brick or stone masonry surfaces in all positions withbase coat of 12 to 15 mm thick in C.M. 1:4 and rough casttreatment 12mm thick in proportion 1:1 1/2:3 includingscaffolding and fourteen days curing completeOn External Walls.On Internal Walls |
| 20 | Providing and fixing corrugated galvanised iron sheets of0.63mm thick (24 B.W.G.) for roofing without wind tilesincluding fastening with galvanised iron screws & bolts, lead& bitumen washers as per drawing etc. complete.(Weight of5.5 kg/sq.m.).Curing ShedOn Side Walls |
| 21 | Toilet |
| 22 | Excavation for foundation in earth, soils of all typessand, gravel and soft murum including removing theexcavated material upto a distance of 50 m. beyondthe building area and with all lifts stacking andspreading as directed, dewatering, shoring, structingand preparing the bed for the foundation andnecessary back filling, ramming, watering (Includingshoring and strutting) etc. complete. (Lift Upto 1.50Metre) - Spec. No. : Bd.A 1 Page No.259In all types soils/ saturated soil such as moorum, sand,sandy silt, clay, black cotton soil, kankar, etc.Excavation for Footing of Toilet |
| 23 | Providing and casting in situ cement concrete M20of trap / granite /quartzite/ gneiss metal for R.C.C.columns as per detailed designs and drawing or asdirected including centering, formwork, cover blockscompaction finishing the formed surfaces with cementmortar 1:3 of sufficient minimum thickness to give asmooth and even surface or roughening if specialfinish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).Withfully automatic micro processor based PLC withSCADA enabled reversible drum type concrete mixerWith Crushed sand.Column |
| 24 | Providing and casting in situ cement concrete M20of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabsand landings canopy as per detailed designs anddrawings including centering, formwork, cover blockscompaction finishing the formed surfaces with cementmortar 1:3 of sufficient minimum thickness to give asmooth and even surface or roughening if specialfinish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).Withfully automatic micro processor based PLC withSCADA enabled reversible drum type concrete mixerWith Crushed sand. |
| 25 | Filling in plinth and floors with approved excavatedmaterial in 15cm. to 20cm. layers including wateringand compacting etc. complete. Spec. No. : Bd.A.11/Page No. 262 |
| 26 | Providing second class Burnt Brick masonry withconventional/ I.S. type bricks in cement mortar 1:6 insuperstructure including striking joints, raking outjoints, watering and scaffolding etc. Complete |
| 27 | Providing Burnt Brickonedge masonry with secondclass bricks of conventional type bricks in cementmortar 1:3 including mild steel longitudinalreinforcement of 2 bars of 6mm diameter / one strips ofhoop iron 25 mm X 1.6 mm placed at every thirdcourse, properly bent and bonded at ends, scaffolding,rakingout joints and watering etc .complete. |
| 28 | Providing internal cement plaster 6 mm thick in asingle coat in cement mortar 1:4 without neeru finish toconcrete surface in all positions including scaffoldingand curing etc. complete. |
| 29 | Providing and applying colourwash of approved colourand shade in two coats to new surface includingscaffolding, brushing and brooming down (excludingbase coat of whitewash) etc. complete. |
| 30 | Providing and laying Rough Shahabad Stone Flooring50mm to 60mm thick and of required width in plain/diamond pattern on a bed of 1:6 C.M. including cementfloat, striking joints, pointing in cement mortar 1:3curing and cleaning etc. etc. complete. |
| 31 | Providing and Fixing 30 MM thick \"\" FACTORY MADEBOTH SIDE PRELAMINATED SOLID PANEL PVCDOOR SHUTTER manufactured by M/S RAJSHRIequivalent consisting of frame made out of M.S tubesof 19 guage thickness and, size 19 x 19 mm for stylesand 15 x15 mm for the top and bottom rails,M.S frameshall have a coat of metel primer of approved makeandmanufacture .M.S frame shall be covered with heatmouled PVC \" C \" channel made from 5 mm (+/0.25)thick prelaminated sheet of density 600 kg/cbm ,of size30mm thickness 70mm width out of which 50mm shallbe flat and 20mm shall be tapered in 45? angle oneither side forming stiles ; and 5 mmthick ,95 mm wide PVC sheet out of which 75 mm shallbe falt and 20 mm shall be tapered in 45? on the innerside to form top and bottom rail and 115 mm wide PVCsheet out of which 75 mm shall be falt and 20 mm shallbe tapered on both sides to form lock rail.Top,bottomand lock rail shall be provided either side of the panel.An additional 5 mm (+/0.25) thick PVC strip of 20 mmwidth is to be stuck on the bottom side of the \" c \"channel prelaminated paneling of 5 mm (+/0.25) thickPVC sheet to be fitted inside the M.S. frame welded/sealed to the styles and rails with 5 mm (+/0.25) x 30mm PVC sheet beading on either side and joinedtogether with solvent cement adhesive etc ,10 mmthickness (5 mm (+/0.25) x 2 nos ) 20 mm wide crossPVC sheet as gap insert for the rail and bottom rail.Door to be fixed to frames with 3 nos M.S.powdercoated but hinges of size 100 mm x 25MM x 2mmusing 32 mm long steel screws drilled suitable to passthrough both the walls of the M.S tube. Otherhardwares should be fixed with 19 x 6 mm size steelscrews including fixture fasting. Complete as perdirection of engineer in charge |
| 32 | Providing and fixing in position aluminium partlyopenable and partly fixed window of any size as perdetailed drawing and as directed by Engineerinchargewith all necessary alluminium sections includingnecessary fixtures and fastening with 5 mm thick floatglass etc. complete. a) Without powder coating NoteWhile arriving at the rate of item of item weight at 6.90kg/Sqm is considered. |
| 33 | Providing and fixing Anglo Indian type white glazedearthenware water closet pan with trap with UPVCseat and lid with chromium plated brass hinges andrubber buffers including UPVC and vent pipe up to theoutside face of wall with flushing cistern and necessaryfittings including cutting and making good to the wallsand floors testing etc. complete.( prior approval ofsample and brand by Ex. Engineer is necessary beforeuse) |
| 34 | Providing and fixing white glazed earthenware WashHand Basin of 63cm x 45cm size including cold waterpillar tap/cold and hot water pillar tap brackets, rubberplugs and brass chain, stop tap and necessary pipeconnection including P.V.C. waste pipe and trap up tothe outside face of the wall. |
| 35 | Providing and fixing white glazed earthenware lippedflat back/corner type Urinal with PVC 5 liters flushingcistern with fittings, inlet pipe with stop tap, brackets forfixing the cistern, 32 mm diameter P.V.C. flush pipewith fitting including lead soil pipe, lead trap & soil pipeconnection up to the outside face of wall. |
| 36 | Providing and fixing H.D.P container Syntex or alikeone piece moulded water tank made out of highdensity polythyler and built corrugated inclusive ofdelivery up to destination hoisting and fixing ofaccessories such as inlet,outlet overflow pipe inclusiveof all tanks capacity between 200 to 1000 liters |
| 37 | Sanitary & Plumbing Work (Add 2% extra of Civil Workfor sanitary works) |
| 38 | Electrical Work (Add 2% extra of Civil Work forelectrical works) |
| 39 | Weighbridge Room |
| 40 | Excavation for foundation in earth, soils of all typessand, gravel and soft murum including removing theexcavated material upto a distance of 50 m. beyond thebuilding area and with all lifts stacking and spreading asdirected, dewatering, shoring, structing and preparingthe bed for the foundation and necessary back filling,ramming, watering (Including shoring and strutting) etc.complete. (Lift Upto 1.50 Metre) - Spec. No. : Bd.A 1Page No.259In all types soils/ saturated soil such as moorum, sand,sandy silt, clay, black cotton soil, kankar, etc. |
| 41 | Providing and casting in situ cement concrete in M15 oftrap/ granite/quartzite/gneiss metal for steps includingsteel centering, plywood/steel formwork, compacting,roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curingetc. complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven and honeycombedsurface, only. Newly laid concrete shall be covered bygunny bag, plastic, tarpaulin etc. (Wooden centering willnot be allowed.),with fully automatic micro processorbased PLC with SCADA enabled reversible Drum Typemixer ... With natural sand.1:3:6 (1 Cement : 3 coarse sand : 6 graded stoneaggregate 20 mm nominal size). |
| 42 | Providing and casting in situ cement concrete M20of trap / granite /quartzite/ gneiss metal for R.C.C.columns as per detailed designs and drawing or asdirected including centering, formwork, cover blockscompaction finishing the formed surfaces with cementmortar 1:3 of sufficient minimumthickness to give a smooth and even surface orroughening if special finish is to be provided and curingetc. complete, (Excluding reinforcement and structuralsteel).With fully automatic micro processor based PLCwith SCADA enabledreversible drum type concrete mixer With Crushedsand. |
| 43 | Providing & casting in situ cement concrete M20of trap / granite /quartzite/ gneiss metal for R.C.C.beams and lintels as per detailed designs & drawings oras directed including centering, formwork, cover blockscompaction & roughening the surface if special finish isto be provided & curing etc.complete. (Excluding reinforcement and structuralsteel). With fully automatic micro processor based PLCwith SCADA enabled reversible drum type concretemixer With Crushed sand |
| 44 | Filling in plinth and floors with approved excavatedmaterial in 15cm. to 20cm. layers including wateringand compacting etc. complete. Spec. No. : Bd.A.11/Page No. 262 |
| 45 | Providing internal cement plaster 6 mm thick in a single coatin cement mortar 1:4 without neeru finish to concrete surfacein all positions including scaffolding and curing etc. complete. |
| 46 | Providing and applying colourwash of approved colourand shade in two coats to new surface includingscaffolding, brushing and brooming down (excludingbase coat of whitewash) etc. complete.Two or more coats on new work.Same As Plaster |
| 47 | Providing and laying Rough Shahabad Stone Flooring50mm to 60mm thick and of required width in plain/diamond pattern on a bed of 1:6 C.M. including cementfloat, striking joints, pointing in cement mortar 1:3curing and cleaning etc. etc. complete.Light shade pigment with white cement. |
| 48 | Providing and Fixing 30 MM thick \"\" FACTORY MADE BOTHSIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTERmanufactured by M/S RAJSHRI equivalent consisting of framemade out of M.S tubes of 19 guage thickness and, size 19 x 19mm for styles and 15 x15 mm for the top and bottomrails,M.S frame shall have a coat of metel primer of approvedmake andmanufacture .M.S frame shall be covered with heat mouledPVC \" C \" channel made from 5 mm (+/0.25) thickprelaminated sheet of density 600 kg/cbm ,of size 30mmthickness 70mm width out of which 50mm shall be flat and20mm shall be tapered in 45? angle on either side formingstiles ; and 5 mmthick ,95 mm wide PVC sheet out of which 75 mm shall be faltand 20 mm shall be tapered in 45? on the inner side to formtop and bottom rail and 115 mm wide PVC sheet out of which75 mm shall be falt and 20 mm shall be tapered on both sidesto form lock rail.Top,bottom and lock rail shall be providedeither side of the panel. An additional 5 mm (+/0.25) thickPVC strip of 20 mm width is to be stuck on the bottom side ofthe \" c \" channel prelaminated paneling of 5 mm (+/0.25) thickPVC sheet to be fitted inside the M.S. frame welded/sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVCsheet beading on either side and joined together with solventcement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos) 20 mm wide cross PVC sheet as gap insert for the rail andbottom rail. Door to be fixed to frames with 3 nosM.S.powder coated but hinges of size 100 mm x 25MM x2mm using 32 mm long steel screws drilled suitable to passthrough both the walls of the M.S tube. Other hardwaresshould be fixed with 19 x 6 mm size steel screws includingfixture fasting. Complete as per direction of engineer incharge. |
| 49 | Providing and fixing in position aluminium partly openableand partly fixed window of any size as per detailed drawingand as directed by Engineerincharge with all necessaryalluminium sections including necessary fixtures andfastening with 5 mm thick float glass etc. complete. a)Without powder coating Note While arriving at the rate ofitem of item weight at 6.90 kg/Sqm is considered.Using M.S. angels 40x40x6 mm for diagonal braces. |
| 50 | Electrical Work (Add 2% extra of Civil Work for electricalworks) |
| 51 | Weighbridge Platform |
| 52 | Excavation for foundation in earth, soils of all typessand, gravel and soft murum including removing theexcavated material upto a distance of 50 m. beyondthe building area and with all lifts stacking andspreading as directed, dewatering, shoring, structingand preparing the bed for the foundation andnecessary back filling, ramming, watering (Includingshoring and strutting) etc. complete. (Lift Upto 1.50Metre) - Spec. No. : Bd.A 1 Page No.259In all types soils/ saturated soil such as moorum,sand, sandy silt, clay, black cotton soil, kankar, etc. |
| 53 | Providing and casting in situ cement concrete in M15of trap/ granite/quartzite/gneiss metal for stepsincluding steel centering, plywood/steel formwork,compacting, roughening them if special finish is to beprovided, finishing uneven and honeycombed surfaceand curing etc. complete. The Cement Mortar 1:3plaster is considered for rendering uneven andhoneycombed surface, only. Newly laid concreteshall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.),with fullyautomatic micro processor based PLC with SCADAenabled reversible Drum Typemixer ... With natural sand.1:3:6 (1 Cement : 3 coarse sand : 6 graded stoneaggregate 20 mm nominal size). |
| 54 | Dry Waste Collection Centre |
| 55 | Excavation for foundation in earth, soils of all typessand, gravel and soft murum including removing theexcavated material upto a distance of 50 m. beyondthe building area and with all lifts stacking andspreading as directed, dewatering, shoring, structingand preparing the bed for the foundation andnecessary back filling, ramming, watering (Includingshoring and strutting) etc. complete. (Lift Upto 1.50Metre) - Spec. No. : Bd.A 1 Page No.259 |
| 56 | Providing and casting in situ cement concrete in M15 oftrap/ granite/quartzite/gneiss metal for steps includingsteel centering, plywood/steel formwork, compacting,roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curingetc. complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven and honeycombedsurface, only. Newly laid concrete shall be covered bygunny bag, plastic, tarpaulin etc. (Wooden centeringwill not be allowed.),with fully automatic microprocessor based PLC with SCADA enabled reversibleDrum Typemixer ... With natural sand.Providing and casting in situ cement concrete in M15 oftrap/ granite/quartzite/gneiss metal for steps includingsteel centering, plywood/steel formwork, compacting,roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curingetc. complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven and honeycombedsurface, only. Newly laid concrete shall be covered bygunny bag, plastic, tarpaulin etc. (Wooden centeringwill not be allowed.),with fully automatic microprocessor based PLC with SCADA enabled reversibleDrum Typemixer ... With natural sand. |
| 57 | Providing and laying in situ cement concrete M20of trap / granite /quartzite/ gneiss metal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchions etc.including bailing out water, formwork, cover blockscompaction and curing roughening the surface ifspecial finish is to be provided (Excludingreinforcement and structural steel) etc. etc. complete,With fully automatic micro processor based PLC withSCADA enabled reversible drum type concrete mixer .With natural sand. |
| 58 | Providing and casting in situ cement concrete M20of trap / granite /quartzite/ gneiss metal for R.C.C.columns as per detailed designs and drawing or asdirected including centering, formwork, cover blockscompaction finishing the formed surfaces with cementmortar 1:3 of sufficient minimumthickness to give a smooth and even surface orroughening if special finish is to be provided and curingetc. complete, (Excluding reinforcement and structuralsteel).With fully automatic micro processor based PLCwith SCADA enabledreversible drum type concrete mixer With Crushedsand. |
| 59 | Providing & casting in situ cement concrete M20of trap / granite /quartzite/ gneiss metal for R.C.C.beams and lintels as per detailed designs & drawingsor as directed including centering, formwork, coverblocks compaction & roughening the surface if specialfinish is to be provided & curing etc.complete. (Excluding reinforcement and structuralsteel). With fully automatic micro processor based PLCwith SCADA enabled reversible drum type concretemixer With Crushed sand. |
| 60 | Providing and casting in situ cement concrete M20of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabsand landings canopy as per detailed designs anddrawings including centering, formwork, cover blockscompaction finishing the formed surfaces with cementmortar 1:3 of sufficient minimumthickness to give a smooth and even surface orroughening if special finish is to be provided and curingetc. complete, (Excluding reinforcement and structuralsteel).With fully automatic micro processor based PLCwith SCADA enabledreversible drum type concrete mixer With Crushedsand. |
| 61 | Providing and fixing in position TMT FE 500bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns,canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending,hooking the bars, binding with wires or tack weldingand supporting as required complete. a) For TMT Fe415 steel bars ( If Mild Steel/HYSD steel is to be usedprior permission from S.E. should be taken )Mild steel and Medium Tensile steel bars @ 1% byweight of Concrete that means 78.5 Kg per Cum ofConcrete Volume Mild steel and Medium Tensile steel bars @ 1% byweight of Concrete that means 78.5 Kg per Cum ofConcrete Volume |
| 62 | Filling in plinth and floors with approved excavatedmaterial in 15cm. to 20cm. layers including wateringand compacting etc. complete. Spec. No. : Bd.A.11/Page No. 262 |
| 63 | Providing second class Burnt Brick masonry withconventional/ I.S. type bricks in cement mortar 1:6 insuperstructure including striking joints, raking out joints,watering and scaffolding etc. Complete |
| 64 | Providing internal cement plaster 6 mm thick in a singlecoat in cement mortar 1:4 without neeru finish toconcrete surface in all positions including scaffoldingand curing etc. complete. |
| 65 | Providing and applying colourwash of approved colourand shade in two coats to new surface includingscaffolding, brushing and brooming down (excludingbase coat of whitewash) etc. complete. |
| 66 | Providing and laying Rough Shahabad Stone Flooring50mm to 60mm thick and of required width in plain/diamond pattern on a bed of 1:6 C.M. including cementfloat, striking joints, pointing in cement mortar 1:3curing and cleaning etc. etc. complete.Light shade pigment with white cement. |
| 67 | Providing and Fixing 30 MM thick \"\" FACTORY MADEBOTH SIDE PRELAMINATED SOLID PANEL PVCDOOR SHUTTER manufactured by M/S RAJSHRIequivalent consisting of frame made out of M.S tubesof 19 guage thickness and, size 19 x 19 mm for stylesand 15 x15 mm for the top and bottom rails,M.S frameshall have a coat of metel primer of approved makeandmanufacture .M.S frame shall be covered with heatmouled PVC \" C \" channel made from 5 mm (+/0.25)thick prelaminated sheet of density 600 kg/cbm ,of size30mm thickness 70mm width out of which 50mm shallbe flat and 20mm shall be tapered in 45? angle oneither side forming stiles ; and 5 mmthick ,95 mm wide PVC sheet out of which 75 mm shallbe falt and 20 mm shall be tapered in 45? on the innerside to form top and bottom rail and 115 mm wide PVCsheet out of which 75 mm shall be falt and 20 mm shallbe tapered on both sides to form lock rail.Top,bottomand lock rail shall be provided either side of the panel.An additional 5 mm (+/0.25) thick PVC strip of 20 mmwidth is to be stuck on the bottom side of the \" c \"channel prelaminated paneling of 5 mm (+/0.25) thickPVC sheet to be fitted inside the M.S. frame welded/sealed to the styles and rails with 5 mm (+/0.25) x 30mm PVC sheet beading on either side and joinedtogether with solvent cement adhesive etc ,10 mmthickness (5 mm (+/0.25) x 2 nos ) 20 mm wide crossPVC sheet as gap insert for the rail and bottom rail.Door to be fixed to frames with 3 nos M.S.powdercoated but hinges of size 100 mm x 25MM x 2mmusing 32 mm long steel screws drilled suitable to passthrough both the walls of the M.S tube. Otherhardwares should be fixed with 19 x 6 mm size steelscrews including fixture fasting. Complete as perdirection of engineer in charge |
| 68 | Providing and fabricating structural steel work in rolledsections like joists, channels, angles, tees etc. as perdetailed design and drawings or as directed includingcutting, fabricating, hoisting, erecting, fixing in positionmaking riveted / bolted /welded connections withoutconnecting plates, braces etc. and including one coatof anticorrosive paint and over it two coats of oilpainting of approved quality and shade etc. complete |
| 69 | Providing , laying & fixing ,jointing Supreme Ecodrain110 mm SN 8 NuDrainUpvc pipes or of equivalent make,manufacture as per EN 13476 or equivalent as perI.S.15328with fittings such a bends, tees, coupler, etc, jointingwithrubber lubricant including necessary excavation, trenchrefillingwith selective excavated material etc. complete. |
| 70 | Providing and fixing corrugated galvanised iron sheetsof 0.63mm thick (24 B.W.G.) for roofing without windtiles including fastening with galvanised iron screws &bolts, lead & bitumen washers as per drawing etc.complete.(Weight of 5.5 kg/sq.m.). |
| 71 | Simple Landfill |
| 72 | Excavation for foundation in earth, soils of alltypes sand, gravel and soft murum includingremoving the excavated material upto adistance of 50 m. beyond the building area andwith all lifts stacking and spreading as directed,dewatering, shoring, structing and preparingthe bed for the foundation and necessary backfilling, ramming, watering (Including shoringand strutting) etc. complete. (Lift Upto 1.50Metre) - Spec. No. : Bd.A 1 Page No.259Excavation of Landfill Bed |
| 73 | Providing dry/ trap/ granite/ quartzite/gneiss rubble stone soling 15 cm to 20 cmthick including hand packing andcompacting etc. complete. |
| 74 | Providing and casting in situ cement concrete inM15 of trap/ granite/quartzite/gneiss metal forsteps including steel centering, plywood/steelformwork, compacting, roughening them ifspecial finish is to be provided, finishing unevenand honeycombed surface and curing etc.complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven andhoneycombed surface, only. Newly laidconcrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centering will not beallowed.),with fully automatic micro processorbased PLC with SCADA enabled reversible DrumTypemixer ... With natural sand. |
AI Tender Summary
Tender Timeline
Nov 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender