municipality has published Tender For Aruppukottai Municipality, Supply And Fixing Of New 60Hp Vertical Turbine Pump Set With Electric Motor And All Accessories At Kattangudi Booster Station In Aruppukottai. Submission Date for this Tender is 16-11-2022. Submersible Pump Tenders in Virudhunagar Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply and delivery of 60HP Vertical typewater/ Oil lubricated statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011 ) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos.,Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete.Duty : Head 60m,LPM 3500 to 4000, Sump depth- 6.00M |
| 2 | Supply and delivery of 60HP vertical Hollow/Solid shaft Squirrel cage induction motor (IS 325 ) suitable for the above pump continuous rated TEFC/SPDP type with Class "F" insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%) running with a speed of pump noted above and with inbuilt thrust bearing assembly capable of taking up the entire load and non - reverse ratchet assembly etc., complete. The motor rating noted above is the minimum and shall be such that it should never be over loaded when the pump works at MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motoroffered should be energy efficient to have maximum efficiency at high power factor. Separate thrust bearing assembly could also be supplied to take up the down load. withISI mark including all cost etc, completeas per standardspecifications.Duty 1500RPM - 45 KW |
| 3 | Supply and delivery of Fully Automatic Auto Transformer star & deltaStarter suitable for the 60HP motor offered. Floor mounting type air/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV and as amended therafter for operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%) with the following components, under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/ OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc.Duty : KW/HP - 45/60 |
| 4 | Supply & delivery of PVC Insulated and Sheathed 3 core Flat type copper cable confirming to IS 694/1990 and as Amended Thereafter 50sq.mm flexible copper cablewith standard ISI mark including cost and conveyance of allchargesetc., complete as per standard specifications |
| 5 | Supply & delivery of 250mm CI sluice valve Non raising spindle types to pressure rating of 1.6 PN to be used in pump houses ( Long body / Long face to face )Conforming to IS and with 5 Years warranty with standard ISI mark including cost and conveyance of allcharges etc., complete as per standard specifications |
| 6 | Supply & delivery ofMS bolt & nuts with washer(16mmdia x 65 to 90mm full thread) including cost and conveyance of allchargesetc., complete as per standard specifications |
| 7 | Supply & delivery of3ply R.I Rubber sheet including cost and conveyance of allchargesetc., complete as per standard specifications. |
| 8 | Supply & delivery ofms specials for delivery finishing workwith out inside & outside coatingincluding cost and conveyance of allchargesetc., complete as per standard specifications |
| 9 | Errection of 60HP pump set motor with all accessories including all cost letc..,complete |
| 10 | Jointing the 250mm dia C.I / MS doubleflanged pipe and specials with rubber insertion to with IS-638 and MS bolt & nutsincluding cost of jointing materials such as boltand nuts rubber insertion and labour charges etc., complete |
| 11 | Supplying & fixing of power capacitor including all cost & materiallabour charge setc,complete |
| 12 | Supplying & fixing of 32 - 100amps - 3 pole range MCCB with Thermo Magnetic release including all cost & materiallabour charge setc,complete |
| 13 | Supply & delivery of 250mm CI D/F REFLUX VALVE as per I.S 5312/2004/PART I/84 PIN 1.0 with BYE PASS arrangements with ISI marking and with 5yaers warrenty. complete as per standard specifications |
| 14 | Jointing of XLPE Insulated and sheathed 3 core Flat type copper cable confirming to IS 694/1990 and as Amended Thereafter 50sq.mm flexible copper cableJointing with standard ISI mark including cost and conveyance of allchargesetc., complete as per standard specifications . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
