|
| 1 | COARSE AGGREGATES |
| 2 | Sleeve analysis (Zone-I) |
| 3 | Sleeve analysis (Zone-II) |
| 4 | Sleeve analysis (Zone-III) |
| 5 | Sleeve analysis (Zone-IV) |
| 6 | Water Absorption (Zone-I) |
| 7 | Water Absorption (Zone-II) |
| 8 | Water Absorption (Zone-III) |
| 9 | Water Absorption (Zone-IV) |
| 10 | Specific Gravity (Zone-I) |
| 11 | Specific Gravity (Zone-II) |
| 12 | Specific Gravity (Zone-III) |
| 13 | Specific Gravity (Zone-IV) |
| 14 | Impact Value (Zone-I) |
| 15 | Impact Value (Zone-II) |
| 16 | Impact Value (Zone-III) |
| 17 | Impact Value (Zone-IV) |
| 18 | Abrasion Value (Zone-I) |
| 19 | Abrasion Value (Zone-II) |
| 20 | Abrasion Value (Zone-III) |
| 21 | Abrasion Value (Zone-IV) |
| 22 | Crushing Value (Zone-I) |
| 23 | Crushing Value (Zone-II) |
| 24 | Crushing Value (Zone-III) |
| 25 | Crushing Value (Zone-IV) |
| 26 | Flakiness and Elongation Index (Zone-I) |
| 27 | Flakiness and Elongation Index (Zone-II) |
| 28 | Flakiness and Elongation Index (Zone-III) |
| 29 | Flakiness and Elongation Index (Zone-IV) |
| 30 | Soundness (Zone-I) |
| 31 | Soundness (Zone-II) |
| 32 | Soundness (Zone-IIII) |
| 33 | Soundness (Zone-IV) |
| 34 | FINE AGGREGATES |
| 35 | Finess Modulus (Sleve Analysis) (Zone-I) |
| 36 | Finess Modulus (Sleve Analysis) (Zone-II) |
| 37 | Finess Modulus (Sleve Analysis) (Zone-III) |
| 38 | Finess Modulus (Sleve Analysis) (Zone-IV) |
| 39 | Silt & Clay Content (wet Sleving) (Zone-I) |
| 40 | Silt & Clay Content (wet Sleving) (Zone-II) |
| 41 | Silt & Clay Content (wet Sleving) (Zone-III) |
| 42 | Silt & Clay Content (wet Sleving) (Zone-IV) |
| 43 | Bulk Density (Loose & Rodded) (Zone-I) |
| 44 | Bulk Density (Loose & Rodded) (Zone-II) |
| 45 | Bulk Density (Loose & Rodded) (Zone-III) |
| 46 | Bulk Density (Loose & Rodded) (Zone-IV) |
| 47 | CONCRETE |
| 48 | Compressive Strenght of C.C. Cubes (3 Cubes) (Zone-I) |
| 49 | Compressive Strenght of C.C. Cubes (3 Cubes) (Zone-III) |
| 50 | Compressive Strenght of C.C. Cubes (3 Cubes) (Zone-III) |
| 51 | Compressive Strenght of C.C. Cubes (3 Cubes) (Zone-IV) |
| 52 | Concrete Mix Design (With all tests on basic Material (Zone-I) |
| 53 | Concrete Mix Design (With all tests on basic Material(Zone-II) |
| 54 | Concrete Mix Design (With all tests on basic Material (Zone-III) |
| 55 | Concrete Mix Design (With all tests on basic Material(Zone-IV) |
| 56 | Flexural Strength (on Beam) (Zone-I) |
| 57 | Flexural Strength (on Beam) (Zone-II) |
| 58 | Flexural Strength (on Beam) (Zone-III) |
| 59 | Flexural Strength (on Beam) (Zone-IV) |
| 60 | Concrete mix design by Accelerated curing method (Boilling water method) (Zone-I) |
| 61 | Concrete mix design by Accelerated curing method (Boilling water method) (Zone-II) |
| 62 | Concrete mix design by Accelerated curing method (Boilling water method) (Zone-III) |
| 63 | Concrete mix design by Accelerated curing method (Boilling water method) (Zone-IV) |
| 64 | Slump Test (Zone-I) |
| 65 | Slump Test (Zone-II) |
| 66 | Slump Test (Zone-III) |
| 67 | Slump Test (Zone-IV) |
| 68 | CONCRETE PAVING BLOCKS |
| 69 | Compressive Strength ( 8 Blocks) (Zone-I) |
| 70 | Compressive Strength ( 8 Blocks) (Zone-II) |
| 71 | Compressive Strength ( 8 Blocks) (Zone-III) |
| 72 | Compressive Strength ( 8 Blocks) (Zone-IV) |
| 73 | Water Absorption (Zone-I) |
| 74 | Water Absorption (Zone-II) |
| 75 | Water Absorption (Zone-III) |
| 76 | Water Absorption (Zone-IV) |
| 77 | MORTAR |
| 78 | Compressive Strenghth (Zone-I) |
| 79 | Compressive Strenghth (Zone-II) |
| 80 | Compressive Strenghth (Zone-III) |
| 81 | Compressive Strenghth (Zone-IV) |
| 82 | CORE EXTRACTION & Tesing PAVEMENT |
| 83 | Only extraction of core samples in concrete pavement up to Grade M50 & Capping (Zone-I) |
| 84 | Only extraction of core samples in concrete pavement up to Grade M50 & Capping (Zone-II) |
| 85 | Only extraction of core samples in concrete pavement up to Grade M50 & Capping (Zone-III) |
| 86 | Only extraction of core samples in concrete pavement up to Grade M50 & Capping (Zone-IV) |
| 87 | Extraction of core samples in concrete pavement up to Grade M 50, Capping testing for thickness, strength (Zone-I) |
| 88 | Extraction of core samples in concrete pavement up to Grade M 50, Capping testing for thickness, strength (Zone-II) |
| 89 | Extraction of core samples in concrete pavement up to Grade M 50, Capping testing for thickness, strength (Zone-III) |
| 90 | Extraction of core samples in concrete pavement up to Grade M 50, Capping testing for thickness, strength (Zone-IV) |
| 91 | Only extractio of core samples in bituminous flexible pavement (Zone-I) |
| 92 | Only extractio of core samples in bituminous flexible pavement (Zone-II) |
| 93 | Only extractio of core samples in bituminous flexible pavement (Zone-III) |
| 94 | Only extractio of core samples in bituminous flexible pavement (Zone-IV) |
| 95 | Extraction of core samples in bituminous flexible pavements, testing for density (Zone-I) |
| 96 | Extraction of core samples in bituminous flexible pavements, testing for density (Zone-II) |
| 97 | Extraction of core samples in bituminous flexible pavements, testing for density (Zone-III) |
| 98 | Extraction of core samples in bituminous flexible pavements, testing for density (Zone-IV) |
| 99 | NON-DESTRUCTIVE TESTS on RCC STRUCTURES |
| 100 | Rebound Hammer (Zone-I) |
| 101 | Rebound Hammer (Zone-II) |
| 102 | Rebound Hammer (Zone-III) |
| 103 | Rebound Hammer (Zone-IV) |
| 104 | Ultrasoni Pulse Velocity (Zone-I) |
| 105 | Ultrasoni Pulse Velocity (Zone-II) |
| 106 | Ultrasoni Pulse Velocity (Zone-III) |
| 107 | Ultrasoni Pulse Velocity (Zone-IV) |
| 108 | STEEL BAR TESTINGUpto 16 mm (3 Bars) & above 16 mm ( 3 Bars) |
| 109 | Physical Tests Weight/Rmt (Zone-I) |
| 110 | Physical Tests Weight/Rmt (Zone-II) |
| 111 | Physical Tests Weight/Rmt (Zone-III) |
| 112 | Physical Tests Weight/Rmt (Zone-IV) |
| 113 | UTM (Tensile Strenght, % Elongation, yield Stress, Weight-per Meter, Bend/Re-bend Test, Proof Stress, Modulus of elasticity (Zone-I) |
| 114 | UTM (Tensile Strenght, % Elongation, yield Stress, Weight-per Meter, Bend/Re-bend Test, Proof Stress, Modulus of elasticity (Zone-II) |
| 115 | UTM (Tensile Strenght, % Elongation, yield Stress, Weight-per Meter, Bend/Re-bend Test, Proof Stress, Modulus of elasticity (Zone-III) |
| 116 | UTM (Tensile Strenght, % Elongation, yield Stress, Weight-per Meter, Bend/Re-bend Test, Proof Stress, Modulus of elasticity (Zone-IV) |
| 117 | Chemical Tests (Carbon, Sulphur, Phosphorous) (Zone-I) |
| 118 | Chemical Tests (Carbon, Sulphur, Phosphorous) (Zone-II) |
| 119 | Chemical Tests (Carbon, Sulphur, Phosphorous) (Zone-III) |
| 120 | Chemical Tests (Carbon, Sulphur, Phosphorous) (Zone-IV) |
| 121 | BRICKS |
| 122 | Compressive Strength (5 Bricks) (Zone-I) |
| 123 | Compressive Strength (5 Bricks) (Zone-II) |
| 124 | Compressive Strength (5 Bricks) (Zone-III) |
| 125 | Compressive Strength (5 Bricks) (Zone-IV) |
| 126 | Water Absorption (Zone-I) |
| 127 | Water Absorption (Zone-II) |
| 128 | Water Absorption (Zone-III) |
| 129 | Water Absorption (Zone-IV) |
| 130 | CEMENT/CONCRETE Blocks (AAC, SOLID, Hollow) |
| 131 | Compressive Strength ( 8 Bricks) (Zone-I |
| 132 | Compressive Strength ( 8 Bricks) (Zone-II) |
| 133 | Compressive Strength ( 8 Bricks) (Zone-III) |
| 134 | Compressive Strength ( 8 Bricks) (Zone-IV) |
| 135 | Water Absorpiton (Zone-I) |
| 136 | Water Absorpiton (Zone-II) |
| 137 | Water Absorpiton (Zone-III) |
| 138 | Water Absorpiton (Zone-IV) |
| 139 | Bulk Density(Zone-I) |
| 140 | Bulk Density(Zone-II) |
| 141 | Bulk Density (Zone-III) |
| 142 | Bulk Density (Zone-IV) |
| 143 | MANHOLE COVERS / CATCHPIT COVERS |
| 144 | Load Test (Zone-I) |
| 145 | Load Test (Zone-II) |
| 146 | Load Test (Zone-III) |
| 147 | Load Test (Zone-IV) |
| 148 | FLOORING TILES |
| 149 | Flexural Test ( 6 Tiles) (Zone-I) |
| 150 | Flexural Test ( 6 Tiles) (Zone-II) |
| 151 | Flexural Test ( 6 Tiles) (Zone-III) |
| 152 | Flexural Test ( 6 Tiles) (Zone-IV) |
| 153 | Water Absorption (Zone-I) |
| 154 | Water Absorption (Zone-II) |
| 155 | Water Absorption (Zone-III) |
| 156 | Water Absorption (Zone-IV) |
| 157 | TUBES/PIPES (MS, CI, GI, Steel, Stainless steel) |
| 158 | Unit Weight/rmt (Zone-I) |
| 159 | Unit Weight/rmt (Zone-II) |
| 160 | Unit Weight/rmt (Zone-III) |
| 161 | Unit Weight/rmt (Zone-IV) |
| 162 | Tensile Strength (Zone-I) |
| 163 | Tensile Strength (Zone-II) |
| 164 | Tensile Strength (Zone-III) |
| 165 | Tensile Strength (Zone-IV) |
| 166 | UPVC Pipe |
| 167 | All tests except long term Hydrostatic Pressure (Zone-I) |
| 168 | All tests except long term Hydrostatic Pressure (Zone-II) |
| 169 | All tests except long term Hydrostatic Pressure (Zone-III) |
| 170 | All tests except long term Hydrostatic Pressure (Zone-IV) |
| 171 | All tests including long term Hydrostatic (Zone-I) |
| 172 | All tests including long term Hydrostatic (Zone-II) |
| 173 | All tests including long term Hydrostatic (Zone-III) |
| 174 | All tests including long term Hydrostatic (Zone-IV) |
| 175 | Pressure (Zone-I) |
| 176 | Pressure (Zone-II) |
| 177 | Pressure (Zone-III) |
| 178 | Pressure (Zone-IV) |
| 179 | Wood |
| 180 | Moisture Content (Zone-I) |
| 181 | Moisture Content (Zone-II) |
| 182 | Moisture Content (Zone-III) |
| 183 | Moisture Content (Zone-IV) |
| 184 | Density (Zone-I) |
| 185 | Density (Zone-II) |
| 186 | Density (Zone-III) |
| 187 | Density (Zone-IV) |
| 188 | Tensile Strength (Zone-I) |
| 189 | Tensile Strength (Zone-II) |
| 190 | Tensile Strength (Zone-III) |
| 191 | Tensile Strength (Zone-IV) |
| 192 | Hardness (Zone-I) |
| 193 | Hardness (Zone-II) |
| 194 | Hardness (Zone-III) |
| 195 | Hardness (Zone-IV) |
| 196 | Cement |
| 197 | Fineness by dry sieving (Zone-I) |
| 198 | Fineness by dry sieving (Zone-II) |
| 199 | Fineness by dry sieving (Zone-III) |
| 200 | Fineness by dry sieving (Zone-IV) |
| 201 | Initial and Final Setting Time of Cement Test (Zone-I) |
| 202 | Initial and Final Setting Time of Cement Test (Zone-II) |
| 203 | Initial and Final Setting Time of Cement Test (Zone-III) |
| 204 | Initial and Final Setting Time of Cement Test (Zone-IV) |
| 205 | Chemical Composition Test by Flame Photometer (Zone-I) |
| 206 | Chemical Composition Test by Flame Photometer (Zone-II) |
| 207 | Chemical Composition Test by Flame Photometer (Zone-III) |
| 208 | Chemical Composition Test by Flame Photometer (Zone-IV) |
| 209 | Determination of Compressive Strength (Zone-I) |
| 210 | Determination of Compressive Strength (Zone-II) |
| 211 | Determination of Compressive Strength (Zone-III) |
| 212 | Determination of Compressive Strength (Zone-IV) |