Annual Plan-Edathala G P Pro.132/22-23-Retarring Of Ayyankulam Road Ward 5-General Civil Work
Tender Value
8.47 Lakhs
Estimated cost
Bid Submission
18 Nov 2022
0 days left
EMD
21184
Bank guarantee accepted
Document Fee
1870
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
edathala → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Plan-Edathala G P Pro.132 / 22-23-Retarring Of Ayyankulam Road Ward 5-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Road Retarring |
| 2 | 75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen RatesConstruction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. |
| 3 | 75.5.2.1pb:Tack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 4 | 75.5.9.1.2pb:20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Case - I By Manual Means(II) Bitumen (S-65) |
| 5 | 75.5.12.A.3.2pb:Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen RatesProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510A. By Manual MeansCase III : Type C(II) Bitumen (S-65) |
| 6 | 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material |
| 7 | OD219184/2022-2023:Providing and laying of interlocking concrete block pavements having thickness 80mm M40 grade hydraulic blocks of approved size, shape and design lain in required pattern over and including a compacted bed of 6mm stone aggregate of 50mm average thickness, etc. All complete as per the direction of Engineer in charge in required design. |
| 8 | 75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification(i) Nominal mix (1:2:4) |
| 9 | name board |
| 10 | OD224042/2022-2023:Providing name board of average size 90cmx60cm fixing with 50mm GI pipe post including bottom concreting , painting lettering etc. complete - as detailed belowEarth work excavation in all classes of soil , PCC 1:4:8 10 cm thick , bottom pedestal of size 30x30x45cm with CC 1:2:4 , 50mm GI pipe as main post of average length 145cm, support strut with 25mm GI pipe 2 Nos 50cm 1mm thick MS sheetboard of frame with 40x4x6mm angle iron and 3mm thick MS gusset plates at junctions , over all painting with synthetic enamel paint and letteringwith synthetic enamel paint |
AI Tender Summary
Tender Timeline
Nov 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender