Renovation Work At The Air Pollution Control System Connected With Furnaces No. 7 And 8 Including Supply, Delivery And Installation Of Pumps Motors, Necessary Plumbing Arrangement And Replacement Of An Id Fan At Shanagar Burning Ghat.
Tender Value
9.65 Lakhs
Estimated cost
Bid Submission
16 Nov 2022
0 days left
EMD
19400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Work At The Air Pollution Control System Connected With Furnaces No. 7 And 8 Including Supply, Delivery And Installation Of Pumps Motors, Necessary Plumbing Arrangement And Replacement Of An Id Fan At Shanagar Burning Ghat.
BOQ
| Sl. No. | Item Description |
| 1 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 43-E/26:Repairing the worn out damaged portion of M.S. body of enclosure of I.D. fan etc. including necessary cutting, welding etc. and after repairing the said portion to be painted |
| 2 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 45-E/49 151856:Dismantling the 12000 cu M/hr I.D. Fan/blower of 12000 cu M /hr capacity from its foundation by opening the foundation bolts/driving bolts and flexible compiling of inlet, outlet canvas duct for repairing purpose. |
| 3 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 45-E/50: Re fixing /mounting the 12000 cu M/ hr I.D fan /blower over its foundation by Means of nuts, bolts, washers connecting the inlet and outlet canvas cloth duct & wearing the ...V... belt complete alignment in respect to driving motor of 25H.P squirrel cage motor |
| 4 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 45-E/47:Supply and fixing the tough ...V... belts of sizes (ECODRIVE make)-C-98 |
| 5 | UDMA.ELECTRIC-MECH.WORK(VOL-1) OCT18 45-E/53: Supply and fixing the S.S 304 plates 14 S.W.G.( 2 mm) thick 980mm x 225mm complete cutting and grinding |
| 6 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 45-E/56:Supply and Fixing of 450 mm dia S.S.-304 Damper of 2mm thick plate with both end flanges |
| 7 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 42-E/22:IMPELLER (12000 CU M /HR CAPACITY): Manufacture, Supply, Fitting and fixing S.S.-304 grade impeller of 635 mm dia. X 110 mm width in overall dimension. Welded with 12 nos. skewed fins/blade (size: 175mm x 100mm x 4mm thickness) at 30... Angle on the impeller centre point with Back plate and Front plate. Size of Back plate and front plate is (635mm dia. x 6mm thickness) respectively .After Fitting, Fixing of shaft with impeller dynamically balance for smooth air discharge capacity 12000 cu. m. /hr |
| 8 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT 18 42-E/23/a:EN-24 SHAFT OF IMPELLER (60 MM DIA, 1000 MM LONG): a)Supply and fixing with EN-24 shaft of 60 mm dia x 1000mm long complete machining in true length, both side steps down 50mm dia x 150mm long or 100mm long for impeller side and pully side respectively incl. key slot on both ends having dimension 150mm x 10mm x 5mm for impeller sideand 100mm x 10mm x5mm for pully side on both ends of shaft is grilled and tapped 12mm dia. for lock washer to fitted of 100mm dia. and 8mm thickness and centrally drilled for 14mm dia. |
| 9 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 42-E/19: DOUBLE BALL BEARING FOR SN-E SHAFT OF I.D FAN (12000CU.M/HR): Supply and fixing of the Roller bearing in the shaft of blower (SKF make 22312E/C3) |
| 10 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 44-E/35:Supply, and fixing of 2 HP Centrifugal Monoblock pump Make- KSB, AGRIBLOC 20-5050 |
| 11 | PWD.SANITARY AND PLUMBING 2017 2-A.(A)-(II) 1. A.(e)(ii):PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1.Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (e) (ii) 40 mm dia. medium quality |
| 12 | PWD.SANITAR Y AND PLUMBING 2017 2-A.(A)-(II) 1. A. (h)(ii):PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1. Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (h) (ii) 80 mm dia. medium quality |
| 13 | PWD.SANITAR Y AND PLUMBING 2017 5-A.(A)-(II) 5.(v): PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 5. Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (v) 40 mm dia |
| 14 | PWD.SANITARY AND PLUMBING 20175-A.(A)-(II) 5.(ii):PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 5. Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (ii) 80 mm dia |
| 15 | PWD.SANITARY AND PLUMBING 2017 5-A.(A)-(II) 4.(v):PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 4. Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (v) 40 mm dia |
| 16 | PWD.SANITARY AND PLUMBING 2017 4-A.(A)-(II) 4.(ii) PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 4.Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (ii) 80 mm dia |
| 17 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 11-B/1/a)/3:Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia.of wire in mm , No of Core - 4 1/2.24 4 |
| 18 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 11-B/1/c)/3:Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 10 1/3.55 4 |
| 19 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 15-B/15/b:Supply & delivery of the following 50 Hz, AC, Direct on Line Starter of continuous duty in sheet steel enclosure (make L&T/ABB/SCHNEIDER):7.5 HP Three Phase (Max. Relay range 20-32 Amp) |
| 20 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 15-B/15/a:Supply & delivery of the following 50 Hz, AC, Direct on Line Starter of continuous duty in sheet steel enclosure (make L&T/ABB/SCHNEIDER):2 HP Single Phase (Max. Relay range 10.5-17.5 Amp) |
| 21 | PWD ELECTRICAL SCHEDULE 2017:Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand 6-32 A TPN 6-32 A |
| 22 | Present Market Price: SUPPLY AND DELIVERY OF 7.5 HP (5.5 KW) SELF PRIMING THREE PHASE MOTOR COUPLED PUMPSET (PUMP MODEL - SP3 WITH 7.5 C2 MOTOR) |
| 23 | Estimated amount |
| 24 | 18 % GST |
| 25 | 1% CESS |
AI Tender Summary
Tender Timeline
Nov 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender