Annual Plan-Cgp:2022-23- P.No-122/23 Kannamkai Vanhangamad Road Retarring-General Civil Work
Tender Value
2.62 Lakhs
Estimated cost
Bid Submission
15 Nov 2022
0 days left
EMD
6551
Bank guarantee accepted
Document Fee
580
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
cheruvathur → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Plan-Cgp:2022-23- P.No-122 / 23 Kannamkai Vanhangamad Road Retarring-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Road Re Tarring |
| 2 | 5.5.B.2a:Modified Penetration Macadam 75 mm thick using Bitumen S-65Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.(B) 75 mm thick :- (II) Bitumen (S-65) |
| 3 | 5.2.1a:Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 4 | 75.9.3.pa:Plastic Roads - Bitumen S-65Plastic roads- Bulk Bitumen Rate20mmthick Open-Graded Premix Carpet using Bituminous (penetration grade/modifiedbitumen) Binder -Bitumen S-65 - Bulk Bitumen and Shredded PlasticProviding, laying and rolling of open-graded premix carpet of 20 mm thicknesscomposed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen oremulsion to required line, grade and level to serve as wearing course on a previouslyprepared base, using HM Plant attached with open pugmilll.Heating of aggregate at 150degree Celsius to 170 degree Celsius, then transferring the hot aggregate to pugmill andadd shredded plastic @10.22 kg/100m2 mixing well to form a uniforth thin layer of plasticOver-hot aggregate and adding hot bitumen (150 to 165 degree Celsius) @ 13.578Kg/10m2 and mix well, laying and rolling with a three wheel 80-100 kN static rollercapacity, finished to required level and grades to be followed by seal coat of either TypeA or Type B or Type C as per Technical Specification Clause 508Case - I ByManual Means(II) Bi umen (5-65),including supplying and stacking of materials. |
| 5 | 5.12.A.3.2a:Seal Coat - Manual Means - Type C - Bitumen S-65Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510A. By Manual Means :- Case - III : Type C(II) Bitumen (S-65) |
| 6 | 3.14:Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. |
AI Tender Summary
Tender Timeline
Nov 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender