Public Administrative Department Government Departments Closing in 0 days TDR #34716447

Tender For Mp-Lads-2022-23 Attingal Parliament-Construction Of Waiting Shed At Alamcode Vhcc Junction-Dpr Preparation Work

Issued by Government Departments · kilimanoor, Kerala
Tender Value
3.38 Lakhs
Estimated cost
Bid Submission
15 Nov 2022
0 days left
EMD
8463
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kilimanoor → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Mp-Lads-2022-23 Attingal Parliament-Construction Of Waiting Shed At Alamcode Vhcc Junction-Dpr Preparation Work

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 15-Nov-2022 Date corrigentum Date 16-Nov-2022

BOQ

Work Name:MP-LADS-2022-23 Attingal parliament-Construction of Waiting shed at Alamcode VHCC Junction-DPR Preparation Work
Sl. No. Item Description
1C/o Waiting shed
22.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
34.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
45.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
55.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
65.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
75.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
85.9.16.1:Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
95.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
105.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
115.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
125.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
1350.2.25.1:Filling with contractor\"s own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
145.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
1550.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
1613.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
1710.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
1850.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
1913.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
2011.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
218.9.1.1:Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.8 mm thickRaj nagar plain white marble/ Udaipur green marble/Zebra black marble
22OD9099/2022-2023::Supplying and fixing granite name board 75*60 cm size on brick wall with engravingletters as per the direction Dept Enginieers
23OD223502/2022-2023::Man coolies engaged for loading and unloading of materials of dilapidated masonrywork,clearing surroundings of pond
24OD223510/2022-2023: supplying and fixing multiwood letters letter at siteincluding multiwood,screw,Hetex Gum ,cutting chargesetc (for one Board of sizes 6m x .61m,& 2x 3mx0.61m)

AI Tender Summary

OUR REF NO 34716447
AUTHORITY Government Departments
TENDER VALUE 3.38 Lakhs
LAST DATE 15-11-2022
Authority
Authority Name Local Self Government Department
Work Description Mp-Lads-2022-23 Attingal Parliament-Construction Of Waiting Shed At Alamcode Vhcc Junction-Dpr Preparation Work
Basic Detail
Tender No 01/2022/AEE/LIDEW/KMR/II PHASE
Bidding Type Tender
Location
City kilimanoor
State Kerala
Key Dates
Publish Date 08 Nov 2022
Submission Date 15 Nov 2022
Open Date 17 Nov 2022
Finance
Tender Value 3.38 Lakhs
Tender Fee 750
EMD 8463
Exemption Not Available
Document List
c816edd3-de18-4264-9853-b24bf24db388.html
alamcodesbdmerged.pdf
BOQ_759201.xls
TENDERDOCUMENT.rar
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 08, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 15, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 17, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

c816edd3-de18-4264-9853-b24bf24db388.html

pdf

alamcodesbdmerged.pdf

xls

BOQ_759201.xls

rar

TENDERDOCUMENT.rar

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders