Tender For Construction Of Bathing Ghat At Chak Malal Nr Temple At W.No.5 Panchayat Chak Malal Block Khour (Pris District Capex Budget)
Tender Value
1.50 Lakhs
Estimated cost
Bid Submission
17 Nov 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khour → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Bathing Ghat At Chak Malal Nr Temple At W.No.5 Panchayat Chak Malal Block Khour ( Pris District Capex Budget )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:ALL KINDS OF SOIL |
| 2 | P/L CEMENT CONCRETE OF 1 5 10 MIX EXCL THE COST OF CENTERING AND SHUTTERING ALL COMPLETE WITH 40MM NOMINAL AGGREGATES |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 MIXwith 20mm nominal aggregates all complete. |
| 4 | SUPPLY AND FILLING OF STONES |
| 5 | Brick work with common burnt clay Modular bricks of class designation 7.5. in foundation and plinth including curing complete in : fromplinth level upto floor v level |
| 6 | HALF Brick work with common burnt clay Modular bricks of class designation 7.5. in foundation and plinth including curing complete in :1:4 MIX fromplinth level upto floor v level |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 MIXwith 20mm nominal aggregates all complete. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Cold twisted bars |
| 9 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 10 | PROVIDING AND LAYING6MM THICK CEMENT PLASTER AT CEILING1:3 MIX ALL COMPLETE |
| 11 | PROVIDING AND LAYING 12MM THICK CEMENT PLASTER IN 1:6 MIX ALL COMPLETE |
| 12 | PROVIDING AND LAYING 15MM THICK CEMENT PLASTER IN 1:6 MIX ALL COMPLETE |
| 13 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 14 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade: ON NEW WORK |
| 15 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 16 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes 75mm diameter pipes |
| 17 | Providing and fixing strips in joints of terrazzo/ cement concrete floors.Glass strips40 mm wide and 4 mm thick |
| 18 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece. |
| 19 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 20 | SANITARY INSTALLATIONS Providing and fixing brass bib cock of approved quality.15 mm nominal bore |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.20MM DIA PIPES |
| 22 | 25MM DIA PIPES |
| 23 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 |
| 24 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 25 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 25 mm nominal bore, weighing not less than 62gms |
| 26 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete .25 mm nominal bore |
| 27 | Providing and fixing uplasticized PVC connection pipe with brass unions 20 mm nominal bore |
| 28 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.25 mm nominal bore |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank OF STAR, SYNTEX, VICTREX, TRIPLE LAYER OF WHITE COLOUR OR EQUIVALENT AS APPROVED BY ENGINEER IN CHARGE . |
| 30 | PROVIDING AND LAYING PVC PIPES OF 100 MM DIAMETER OF SUPREME, PRINCE MAKE ALL COMPLETE |
| 31 | Providing and fixing white vitreous china water closet squatting pan(Indian type) Long pattern W.C. pan of size 580 mm |
| 32 | CENTERING AND SHUTTERING INCL FOUNDATION , FOOTINGS AND BASES OF COLUMNS |
| 33 | SUSPENDED FLOOR |
| 34 | EDGES OF SLAB3 |
| 35 | CEMENT FOR 6KM |
| 36 | SAND FOR6 KM |
| 37 | AGG FOR 7KM |
| 38 | BOULDER FOR 5KM |
| 39 | BRICKS FOR 5KM |
| 40 | SUPPLY AND FIXING OF INTERNAL AND EXTERNAL ELECTRICFICATION INCL FROM SERVICE MAIN TO THE METER POINT AND THEN TO THE MAIN CIRCUIT BOARD, SWITCHES, SOCKET , SWITCH BOARD ETC READY TO USE WITH INSTRUCTION OF SITE ENGINEER INCHARGE ALL COMPLETE |
AI Tender Summary
Tender Timeline
Nov 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender