Military Engineer Services-MES has published Tender For Maintenance Including Repairs To Flooring Dado Roof Ceiling Plinth Protection Joinery Etc In Prem Bagat Enclave Under Ge North Udhampur. Submission Date for this Tender is 28-11-2022. Flooring Work Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Nov-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-11-2022 |
| Sl. No. | Item Description |
| 1 | M&L for demolition of brick work or stone/boulder masonry built in cement mortar or cement limemortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed by Engineerin charge. |
| 2 | M&L for demolition of cement concrete (un reinforced) in ground floor and paving n/exe 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineerin charge. |
| 3 | M&L for demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineerin charge. |
| 4 | M&L for dismantlingfloor, heart or wall tiling including Cement Mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineerin charge. |
| 5 | M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed by Engineerin charge. |
| 6 | M&L for taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engineerin charge. |
| 7 | M&L for taking down chowkats or frame n.exc 1.5 sqm each with shutter(without taking off shutter from the frame) complete all as specified and as directed by Engineerin charge. |
| 8 | M&L for taking down chowkhats or frame exc 1.5 sq.m but n.exc 4 sq.m with shutter (without taking off shutters from the frame) and remove from site complete all as specified and as directed by Engineerin charge. |
| 9 | M&L for taking down shutter of any description exc 1 Sq.m and n/exc 2 Sq.m eachcomplete all as specified and as directed by Engineerin charge. |
| 10 | M&L for dismantling water tanks of 1000 ltrs and removing to store,complete all as specified and as directed by Engineerin charge. |
| 11 | M&L for dismantling water tanks of 500 ltrs and removing to store,complete all as specified and as directed by Engineerin charge. |
| 12 | M&L for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories).,complete all as specified and as directed by Engineerin charge. |
| 13 | M&L for taking up ordown steel tubing and connection, including cleaning for re-fixing or removal to store ofsize of pipe 15 mm bore laid on floor or wall complete all as specified and as directed by Engineerin charge. |
| 14 | M&L for taking down existing water proofing treatment of any type and any thickness including PCC Padding, APP membrane,plaster, etc and removal of rubbish material outside MD Land, complete all as specified and as directed by Engr-in-Charge. |
| 15 | M&L for taking up ordown steel tubing and connection, including cleaning for refixing or removal to store ofsize of pipe 20 mm bore laid on floor or wall complete all as specified and as directed by Engineerin charge. |
| 16 | M&L for dismantling boarding any description, fixed in any position with nails complete all as specified and as directed by Engineerin charge. |
| 17 | M&L for disconnecting and cleaning of existing PVC water tanks of 1000 lit and refixing the same with inlet and outlet connections with tank nipple after carry out water proofing treatment and make necessary temporary arrangment of water to occupant being same period, complete all as specified and as directed by Engr-in-Charge. |
| 18 | M&L for disconnecting and cleaning of existing PVC water tanks of 500 lit and refixing the same with inlet and outlet connections with tank nipple after carry out water proofing treatment and make necessary temporary arrangment of water to occupant being same period, complete all as specified and as directed by Engr-in-Charge. |
| 19 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 complete all as specified and as directed by Engineerin charge. |
| 20 | M&L for brick work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engineerin charge. |
| 21 | M & L forapply bituminous primer confiriming to IS -3384 @ 0.40 Kgs/ Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS -702@ 1.20kg/ Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150 mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20kg/ Sqm and blinded with fine sand in dry condition @ 0.50 kg/Sqm dusted over the bitumen coat ,complete all as specified and as directed by Engineerin charge. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer. |
| 22 | M&L for rendering 10mm thick on fair faces of brick work in cm 1:6 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineerin charge. |
| 23 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces cement plaster in CM 1:4 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineerin charge. |
| 24 | M&L for rendering 15mm thick on stone masonary surfaces or surface other than fair face of brick work in cm 1:4 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineerin charge. |
| 25 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed by Engineerin charge. |
| 26 | M&L for glazed ceramic coloured tiles 450mm x300mm x 6 to 7 mm thick,sharp edged (joint free), in vertical surfaces such as walls, skirting etc , setto match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engineerin charge. |
| 27 | M&L for coloured vitrifired (double charged) tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.38 sqm but n.exc 0.64Sq.m (min. size 800mm x 800mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick screed bed in CM (1:4)complete all as specified and as directed by Engineerin charge. |
| 28 | All as per srl item 26 above but as in skirting to match over and including10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed by Engineerin charge. |
| 29 | M&L for granite work with 16mm thick slab, table rubbed and polished, in steps, window cills, cooking platforms and like in single piece set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4) complete all as specified and as directed by Engineerin charge. |
| 30 | M&L for 50mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners as mandatory and filled with sealing compound grade A complete all as specified and as directed by Engineerin charge. |
| 31 | M&L for 40 mmplain Cement concrete type B-0 ,1:2:4 (12.5 mm graded aggregate) in two layer (each 20mm) ,in leveling course as in roof including chiken wire mesh size of 20mm x 20mm and thickness of mesh 0.91mmprovide between the layer of PCCandeven and smoothwith falsegrooves at 450x450mm all as specified and directed. |
| 32 | M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and as directed by Engineerin charge. |
| 33 | M&L for reinforced cement concrete, 1:1/2:3, (Design mix), type A-1 (using20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and as directed by Engineerin charge. |
| 34 | M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, floor and roof slabs and shelves, horizontal or sloping and similar workexc 5cmbutnot exc. 10cm wide complete all as specified and as directed by Engineerin charge. |
| 35 | M&L for form work to soffits of suspended slabs such as floor slab,landings and similar work not exc 200mm thick in Rough finish surfaces of concrete complete all as specified and as directed by Engineerin charge. |
| 36 | M&L for mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engineerin charge. |
| 37 | M&L for sheet glass 3mm thick ordinary quality and glazing with beading/oil putty in square n/exc 0.5 Sqm each pane complete all as specified and as directed by Engineerin charge. |
| 38 | M&L for 4mm thick figured glass pin head type ordinary quality and size and in any tyupe of frame and glazing with oil putty(or beading) in square n.exc 0.5 sq.m in each panes complete all as specified and as directed by Engineerin charge. |
| 39 | M&L for galvanisedStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm, complete all as specified and as directed by Engineerin charge. |
| 40 | All as per Item 38 above but as in repairs,complete all as specified and as directed by Engineerin charge. |
| 41 | M&L for vitreous china wash down water closet (pedestal pattern), suitable for P or S trap whitecomplete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair,complete all as specified and as directed by Engineerin charge. |
| 42 | M&L for plastic water closet seat, closet pattern with flat button and coverand incl mild steel chromium plated or aluminum hinges device complete all as specified and as directed by Engineerin charge. |
| 43 | M&L for vitreous china squalting pan, orissa pattern size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding complete all as specified and as directed by Engineerin charge. (Fixed in Repair) |
| 44 | M&L for PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type,white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe suitable for EWC or Orrisa WC etc.,fixed in repairs,complete all as specified and as directed by Engineerin charge. |
| 45 | M&L for vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe ,fixed in repair complete all as specified and as directed by Engineerin charge. |
| 46 | M&L for CP Towel Ring 200mm dia Fixed in repair complete all as specified and as directed by Engineerin charge. |
| 47 | M&L for 20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and as directed by Engineerin charge. |
| 48 | M&L for glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed by Engineerin charge. |
| 49 | M&L for corner Glass self ( With CP brakets), as in repairs complete all as specified and as directed by Engineerin charge. |
| 50 | M&L for single lever wall mixer, telephonic type, brass, chromium plated,fancy type, with capstan head handles with lettered "hot" and "cold", screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection,fixed in repair, complete all as specified and as directed by Engineerin charge. |
| 51 | M&L for centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered "Hot" & "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and as directed by Engineerin charge. |
| 52 | M&L for hand shower (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and as directed by Engineerin charge. |
| 53 | M&L for shower rose, brass, chromium plated, 125mm size with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and as directed by Engineerin charge. |
| 54 | M&L for angle valve, brass, chromium plated, fancy type,with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and as directed by Engineerin charge. |
| 55 | M&L for bib taps, brass, chromium plated, fancy type,long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and as directed by Engineerin charge. |
| 56 | M&L for looking mirror of size 600x450mm with bevelled edges, fancy type, made ofselected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers , complete all as specified. |
| 57 | M&L for health faucet, brass, chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and as directed by Engineerin charge. |
| 58 | M&L for jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed I repair complete all as specified and as directed by Engineerin charge |
| 59 | M&L for gun-metal, globe or gate valves,20mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed,complete all as specified and as directed by Engineerin charge.(Fixed in repairs) |
| 60 | M&L for PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed. |
| 61 | M&L for PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified and as directed by Engineerin charge. |
| 62 | M&L for stop valves, brass, fancy type, chromium plated with long shankandcup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified and as directed by Engineerin charge. |
| 63 | M&L for soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, fixed in repair complete all as specified and as directed by Engineerin charge. |
| 64 | M&L for CP brass grating 100mm dia, centre hole, fixed in repaircomplete all as specified and as directed by Engineerin charge. |
| 65 | M&L for CP brass grating 100mm dia, fixed in repair complete all as specified and as directed by Engineerin charge. |
| 66 | M&L for toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed by Engineerin charge. |
| 67 | M&L for plate rack of size 750 x 750 x 300mm made of selected quality 0.63mm thick stainless sheet, of shape and design as approved by GE, fixed with brass screws and rawl plugs complete all as specified and as directed by Engineerin charge. |
| 68 | M&L for sink wall mixture, brass, chromium plated,fancy type, with capstan head handles screwed down high pressure, withlettered "hot" and "cold", including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection,fixed in repair, complete all as specified and as directed by Engineerin charge. |
| 69 | M&L for pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with" long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs,complete all as specified and as directed by Engineerin charge. |
| 70 | M&L for rotational moulded polyethylene water storage tanks three layered white in colour (cylindrical vertical with closed top) of 1000 litres capacityincluding water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and as directed by Engineerin charge.(fixed in repair) |
| 71 | M&L for rotational moulded polyethylene water storage tanks three layred white in colour(cylindrical vertical with closed top) of 500 litres capacityincluding water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and as directed by Engineerin charge.(fixed in repair) |
| 72 | M&L for ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and as directed by Engineerin charge. |
| 73 | M&L for 15 mm dia medium grade galvanised tubes with all fittings and fixedto walls and ceiling or laid in floors complete all as specified and as directed by Engineerin charge. |
| 74 | All as per Serial Item 72 above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item). |
| 75 | M&L for steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed by Engineerin charge. |
| 76 | All as per Serial Item 74 above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item). |
| 77 | M&L for cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified and as directed by Engineerin charge. |
| 78 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with PVC clamps, all as specified and directed by the Engr-in-charge. |
| 79 | All as per Srl item 77above but as in refixing only with stack clamp to wallcomplete all as specified and as directed by Engineerin charge. |
| 80 | S&F 110 mm bore PVC (SWR) bends with access door any radius,all as specified and directed by the Engr-in-charge. |
| 81 | S&F 20 mm dia decorative MS powder coated drapry curtain rods ofwith bright finish,including decorative side domes, brackets complete all as specified and directed by Engineer In Charge. |
| 82 | S&F pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., supplied and fixed complete all as specified and as directed by Engineerin charge. |
| 83 | M & L for pressed steel frames for doors of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engineerin charge. |
| 84 | S&F 35mm thick factory made flush shutter, solid core construction, with block board, core and plywood face panels, commercial type on both sides, complete all as specified and as directed by Engineerin charge. |
| 85 | M & L for factory made solid PVC door of wall nut colourframe of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and as directed by Engineerin charge. |
| 86 | M & L for factory Made Solid PVC Moulded Door Shutterof wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawingcomplete all as specified and as directed by Engineerin charge. |
| 87 | M & L for 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for door edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc 8.20 (a), complete all as specified and asdirected. |
| 88 | M & L for 200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and asdirected. |
| 89 | M & L for 250mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed by Engineerin charge. |
| 90 | M & L for 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and asdirected. |
| 91 | M & L for 150 mm size mild aluminium handles cast type anodised all complete all as specified and asdirected. |
| 92 | M & L for 19/20mm thick block boards,grade 2 quality,interior grade, commercial type,fixed with screws to timber frame work as partition complete all as specified and as directed by Engineerin charge. |
| 93 | M & L for continuous (piano) hinges mild steel bright finish or electro galvanised width of flaps (when open)30mm all as spd and directed |
| 94 | M & L for floor door stoper of Aluminium body and tongue anodised with land drawn steel spring overall length of cover plate 140mm fixed with screwcomplete all as specified and as directed by Engineerin charge. |
| 95 | M & L for mild steel 300 long ordinary rat railrod pattern spring including roller and roller plate,Fixed in repair complete as specified and directed. |
| 96 | M & L for refixing door/window wooden shutter of any description exc 1.00 Sqm and not exc 2.00 Sqm each in same opening after taking down,easing and adjusting and also refixing builders hardware as required; complete all as specified and as directed by Engineerin charge. |
| 97 | M & L for preparation of old decorated plastered surfaces and applying one coat of white wash on walls, complete all as specified and as directed by Engineerin charge. |
| 98 | M & L for preparation of old decorated plastered surfaces and applying one coat of white wash on ceiling, complete all as specified and as directed by Engineerin charge. |
| 99 | M & L for complete removing existing treatment on walls surfaces by scraping down smoke soot, moulds moss & efflorences salts and trading oil & greasy spots,removing all mud,cake with steel wire brush and gunny bags from old plastered surfaces and applying two coats of distemper oil emulsionwhite or tinted over one coat of 1 to 1.2mm thick wall care putty over a coat of alkali resistance priming paint, complete all as specified and as directed by Engineerin charge. |
| 100 | M & L for preparation of new plastered surfaces by using necessary filling compound of Altek/Birla white putty to obtain smooth/even finishby rubbing emerypaper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and as directed by Engineerin charge. |
| 101 | M & L for preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty to obtain smooth/even finishby rubbing emerypapeand applying one coat of distemper oil emulsion white ortinted, complete all as specified and as directed by Engineerin charge. |
| 102 | M & L for preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete,complete all as specified and as directed by Engineerin charge. |
| 103 | M & L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and as directed by Engineerin charge. |
| 104 | M & L for prepration of new plaster surfaces ofwallandapplying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and as directed by Engineerin charge. |
| 105 | M & L for complete removing existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla white putty exterior grade to obtain smooth/even finish by rubbing emerypape and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paint complete all as specified and as directed by Engineerin charge. |
| 106 | M & L for preparation of old wooden painted surface not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted, complete all as specified and as directed by Engineerin charge. |
| 107 | M & L for preparation of new wooden or untreated wood surfaces of any description exc 10 cm width or girth andapplying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineerin charge. |
| 108 | M & L for preparation of old painted steel and iron surfaces exc 10 cm width or girthandapplying one coat of synthetic enamel paint , complete all as specified and as directed by Engineerin charge. |
| 109 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
