|
| 1 | Mango peeler | Dimension not less than 9.8x3.5x3.5 cm, Good quality, hand operated Blade material Stainless steel. |
| 2 | Mango slicer | Dimension not less than 9.8x3.5x3.5 cm, Good quality, hand operated Blade material Stainless steel. |
| 3 | Plastic Mat | not less than 10 x 12 cm tarpaulin and not less than 100 GSM |
| 4 | Mango peeling machine | For peeling whole Raw Mango This is batch type machine Peeling time depends on hardness of mango skin Operator has to manual put 8 to 10 kg mango from top add water and open the discharge gate and bottom when required Top open round shape vertical tank Perforated round shaped vertical basket. Water collection and drain. Holding Capacity 08 to 10 Kg approx. batch capacity. M.O.C Wetted PartsSS304 Elec. Power 1 HP. Single phase |
| 5 | Mango Slicer machine | For slicing whole Raw Mango peeled pre cut sides of mango.Function For slicing whole Raw Mango peeled pre cut sides of mango. Brief spec Use of slicing the mango with help of cutting plate provided with the machine. Raffle plate which is used for cutting mango in different sizes. High speed knifes fitted on center shaft. Thickness adjusting stopper, Slice collection anddish guides. Slices are collected at the bottom. Capacity 08 to 10 Kg approx. batch capacity. Elec. Power 1 H.P. single phase. M.O.C Wetted PartsSS304 |
| 6 | Air dryer 12 tray | Construction GMP Model with all internal parts quality and all external visible, non contact parts either made of M.S, Electrically heated Model. DRYING CHAMBER Double walled construction with insulation in between. With one door outside body fully welded, step less with rounded edges and corners. Inside body fully welded with rounded edges and corners to maximum extent. DOORS Single door with Double walled construction with insulation in between Heavy Hinges. Handle for opening and sparkles locking. AIR RECIRCULATION Coaxial fans driven by 0.5 HP 1440 RPMmotor throughV belt and pulleys. Conical faring for coaxial fan suction. Air inlet with micron filter. Exhaust with adjustable damper. HEATING By finned tube radiator with 6 square meter heat transfer area. SAFETY Safety grid inside drying chamber for re circulation fan and radiator Aluminum explosion flap on rear wall.Safety covers for drive assembly. MOC SS tray MS powder coated model All internal and air contact parts like inside wall of chamber, inside wall of door, radiator, recirculation fan, fan shaft , safety grids, exhaust damper, etc. in MS powder coated All external, visible and non-contact parts like outside wall of chamber, outside wall of door, Hinges, handle, door lock, drive support, drive cover, control panel cover, bottom support, etc. in MS powder coated. |
| 7 | Pulverizer | FunctionFor crushing of Dry Mango chips Brief spec Chamber made from thick plates of 12mm serration inside. Production capacity50 to 80kg per hour. High speed rotor or chopper fitted inside 2 sets of discharge screen. Complete with Feed and discharge chute. M.O.C.wetted parts SS304Elec. Power 2HP single phase 230 V |
| 8 | BAG STITCHING MACHINE | FunctionFor stitching of bags Power220 240v, 1.3 amps, 8000 rpm ac motor also available with 110v ac motor Bag closing speed 1800 stitch per minute Type of stitch federal 101 single thread chain stitch Stitch length 3 stitch per inchTypes of bagsAll kinds of multi wall paper, jute, burlap, cotton, hessian, woven, pp or hdpe bags Material thickness up to 12 mm Weight 5.1 kg |
