Tender For Park At Sivasakthi Nagar, Ward No.19, S.F.No.10/7 In Chinnamanur Municipality
Tender Value
23 Lakhs
Estimated cost
Bid Submission
22 Nov 2022
0 days left
EMD
23000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chinnamanur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Park At Sivasakthi Nagar, Ward No.19, S.F.No.10 / 7 In Chinnamanur Municipality
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Nov-2022 | Change of BOQ | Other | 22-Nov-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 2 | Supplying and filling in foundation andbasement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 3 | Plain Cement Concrete 1:4:8 (one cement, four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 4 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 5 | a.Column |
| 6 | Plinth beam |
| 7 | Kerb wall |
| 8 | Slab for tank (Bottom) |
| 9 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 10 | a. Foundation and Basement |
| 11 | b. Above Basement |
| 12 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 13 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 14 | Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of63mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 15 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 16 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 17 | a) Foundation and basement |
| 18 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 19 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 20 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 21 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 22 | Drilling of 115mm dia borewell in hard rock area including transporting charges and (Excluding cost of casing pipe)all charges etc., complete as per standard specification. |
| 23 | Supply of 125mm dia PVC casing pipe including cost and all charges etc., complete as per standard specification. |
| 24 | Laboure charges for inserting PVC casing pipe including cost and all charges etc., complete as per standard specification. |
| 25 | Supplying and fixing in position of 1.H.P sub merciblemotor ISI standardincluding cost of material’s and labor charges etc .Complete.(15x70) |
| 26 | Supplying and fixing in single pahase panel board with two level gard and out start withISI standardincluding cost of material’s and labor charges etc .Complete. |
| 27 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 28 | Supply and fixing of PVC Pipe and specials |
| 29 | 32mm Dia G.I Pipe |
| 30 | 32mm dia G.I Coupling |
| 31 | 25mm Dia G.I Pipe |
| 32 | 25mm Dia G.I Coupling |
| 33 | 25mm Dia G.I Elbow |
| 34 | 25mm Dia G.I Bend |
| 35 | 25mm Dia G.I Union |
| 36 | 20mm Dia G.I Pipe B class |
| 37 | 20mm Dia G.I Coupling |
| 38 | 20mm Dia G.I Elbow |
| 39 | 20mm Dia G.I Union |
| 40 | Waste Not Tap |
| 41 | HDPE TANK (1000 lit) |
| 42 | Supply and Delivery and Fixing of PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER (6sqmm Cable). |
| 43 | Supply and delivery of Childrens playing materials as directed by the department officer including cost and conveyance of all materials to site etc complete as per standard specifications |
| 44 | Supplying and fixing of Double Swing of height 2.40m height with 40mm dia M.S.Pipes support as legs and top bar is 50mm dia. The seat is 9mm thick renforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc complete as directed by the departmental officers (KNMT 2022-23 approved rate by CMA) |
| 45 | Supplying and fixing of Two seater see saw for below 12 years old childrens to a height of 0.50mm dia leaver and 40mm top bar with M.S.Pipes. The seater is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the departmetal officers (KNMT 2022-23- Approved rate by CMA) |
| 46 | Supplying and fixing of Slide for below 12 years old children to a length of 3.00m with 80mm dia leaver and 40mm top bar with M.S.Pipes. The seater is of moulded plastic. The ladder frame is made up of 25mm M.S.Pipes, Handrail 20mm dis M.S.Pipe and the centre support is 80mm dia M.S.Pipes.The cost shall inclusive of all materials, labours and fixing etc complete as directed by the departmetal officers (KNMT 2022-23- Approved rate by CMA) |
| 47 | Supplying and Fixing of Jungle Gym for below 12 years old children to height of 2.10m with 80mm dia leaver and 40mm top bar with M.S.Pipes. The ladder frame is made up of 25mm M.S.Pipes, Handrail 20mm dia M.S.Pipes and the centre support is 80mm dia M.S.Pipe.The cost shall inclusive of all materials, labours and fixing etc complete as directed by the departmetal officers (KNMT 2022-23- Approved rate by CMA) |
| 48 | Supply of frp park bench 4ftMaterials:frp park bench is made up of frp material with 6 layers... |
| 49 | Supply and Fixing of Dust bins of Animal Shape |
| 50 | Supplying and fixing of 6 metre length single bracket pole with base plate (250x250x6mm0 76.10mm OD x 3.65 mm thick x 6000mm Length in control box with foundation hardwares.etc complete as per standard specification. As per PWD SOR 2022-23 P.No. 148 |
| 51 | Supply and Fixing of 30 W LED Street Light Fittings as per PWD SOR P.No.115 |
| 52 | Supply and layingof 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.Ele. Data 2022-23SD -197 |
| 53 | PVC INSULATED SINGLE CORE MULTI STRAND FIRE RETARDANT FLEXIBLE COPPER CABLE WITH ISI MARK CONFORMING TO IS Ele. Data 2021-22 pg.no.23,Item2,e |
| 54 | Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 55 | Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
AI Tender Summary
Tender Timeline
Nov 15, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 22, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender