Department Of Industries And Commerce has published Tender For Upgradation Of Civil Ph And Electro Mechanical Works For Revival Of Water Treatement Plant At Migc Malout. Submission Date for this Tender is 21-11-2022. Electrical Maintenance Tenders in malout Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Sub Head:- Civil/Public Health works: Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. |
| 2 | Doors of area 3 sqm and below. |
| 3 | Windows of area 3 sqm and below |
| 4 | Scraping Cement plaster |
| 5 | 20mm thick cement plaster 1:4 in two coat work. |
| 6 | Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade |
| 7 | Supplying and fixing of Japani sheet frames (Chowkhats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. |
| 8 | Supplying openable steel windows, of standard rolled steel Z sections, joints mitered and Electrically flash-welded, with iron fittings including necessary iron handles, Peg-stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing ) and finished with two coats of ready mixed paint red lead non setting primer Above one sqm Area |
| 9 | Wire Mesh Windows shutter Section 40mm x 20mm with S.S wire mesh 32 guageflymesh with 144 holes per square inch |
| 10 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect Glazing area above 0.09 sqm 4mm thick or 10.78 Kg/ sqm for window |
| 11 | Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed) |
| 12 | Extra for providing mechanical device, chain and crank operation, for operating rolling shutter, exceeding 11.20 sqm in area, of the rolling shutter |
| 13 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position Code: IS 2202-1 (1999): Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 30mm thick |
| 14 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm |
| 15 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete |
| 16 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 17 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 18 | Dismantling concrete or precast concrete. Reinforced cement concrete |
| 19 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 20 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 21 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, weldingrod complete fixing in position. |
| 22 | Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 23 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect. Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555mm x 230 mm |
| 24 | Providing & fixing in position C.P. brass Sink Cock with swinging spout (wall mounted) of approved make (to the approval of Engineer-in charge) complete in all respect. |
| 25 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glossy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 26 | Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material |
| 27 | Floating coat of 1:5mm thick neat cement laid in one operation to the topping |
| 28 | Cement pointing 1:2 deep variety |
| 29 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres |
| 30 | Cement concrete 1:4:8 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 31 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 32 | Earth filling in Water Works with earth obtained from outside the campus including compensation, loading, unloading, laying as per specification in 20 mm dressing, watering, compacting including carriage upto site of work complete all respects with entire satisfaction of Engineer-in- Charge. |
| 33 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. IS Code: 15658 (2006) |
| 34 | Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects |
| 35 | Providing and fixing stair case railing made out of M.S. Square bars 20mmx20mm as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mmx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects |
| 36 | Dismantling concrete Reinforced cement concrete |
| 37 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 38 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 39 | Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth |
| 40 | Providing & fixing 560 mm, 500 mm and 450 mm internal diameter circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). RCC Man hole cover with Frame 560mm i/d RCC man hole cover with frame as per ISI : Light duty |
| 41 | Dismantling brick work tile, masonry or tile lining In cement |
| 42 | Tile terracing laid dry over roof consisting of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing |
| 43 | Sub Head:- Electro mechanical works: Excavation by mechanical means(JCB or Hydraulicexcavator)in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil outside/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m. Depth for All classes of soil except rocky |
| 44 | Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:8329- 2000, Class-K9 and laying the same in trenches to correct alignment and gradients, jointed with nut bolts and rubber insertion joints fitted complete including all cartage. |
| 45 | 150mm i/d pipe lines laid complete |
| 46 | 200mm i/d pipe lines laid complete |
| 47 | Providing & fixing of 150mm i/d floating arm including S.V. Survival bend, drum, extended rod with hand wheel brackets and guiders complete in all respects. |
| 48 | Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. |
| 49 | D.I. specials upto 300mm i/d |
| 50 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. Through wall 22.86 cm thick |
| 51 | Cutting holes upto 23cm square for pipes in floor and roofs of cement concrete, reinforced concrete or reinforced brick work and making good the same & finishing according to existing finish where required. |
| 52 | Through floor or roof 15.00cm thick |
| 53 | Through floor or roof 22.50cm thick |
| 54 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge). Class PN-1.6 as per ISI |
| 55 | 80mm i/d Sluice Valves flanged |
| 56 | 100mm i/d Sluice Valves flanged |
| 57 | 150mm i/d Sluice Valves flanged |
| 58 | 200mm i/d Sluice Valves flanged |
| 59 | Construction of masonry Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.9 m. x 0.9 m. |
| 60 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 50mm i/d |
| 61 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. 50mm i/d G.I. Union |
| 62 | Providing, fixing and jointing ISI Marked Gun Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. 50mm i/d Gun Metal peet valve heavy pattern. |
| 63 | Painting G.I. Pipes and Specials with synthetic enamel Paint in all shades as per I.S.I. specification on existing or new work, two coats paints including cleaning rubbing surface, etc. 40mm & 50mm i/d G.I. Pipe |
| 64 | Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- |
| 65 | Top Layer: TopLayer: ----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source. |
| 66 | Second Layer :----- Coarse sand screened, cleaned and washed and graded from 3mm to 6mm (from Pathankot or approved equivalent quarry). |
| 67 | Third Layer :----- Bajri screened, cleaned and washed and graded from 6mm to 20mm (from Pathankot or approved equivalent quarry). |
| 68 | Fourth Layer :----- Bajri (Coarse) screened, cleaned and washed and graded from 20mm to 25mm (from Pathankot or approved equivalent quarry). |
| 69 | Bottom Layer: ----- Broken stone, screened, cleaned and washed and graded from 50mm to 75mm (from Pathankot or approved equivalent quarry). |
| 70 | Conglomerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge 100mm fine sand filling. using mechanical mixer for mixing of material |
| 71 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 72 | Overall size 2.5sq.mm (50/0.25mm), 3Core |
| 73 | Overall size 4.0sq.mm (56/0.3mm), 3Core |
| 74 | Overall size 6.0sq.mm (84/0.3mm), 3Core |
| 75 | XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 35sq.mm (4Core) Un-armoured (On-Surface) |
| 76 | Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects |
| 77 | Providing and fixing stair case railing made out of M.S. Square bars 20mmx20mm as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mmx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects |
| 78 | Supplying, installing, testing and Commissioning Raw water Monoblock5HP (3.7kw) 4 Pole 415V, 2800 RPM, Size-80x80mm, Capacity 47M³/hr of 12mtr. head, Discharge 20.8 LPS. Suitable Coupling connects motor to be fitting on suitable foundation including nut bolt andanother accessory to complete job in all respect to the entire satisfaction of Engineer-in-charge. |
| 79 | Supplying, installing, testing and Commissioning Clear water Monoblock15HP (11kw) 4 Pole 415V, 2800 RPM, Size-80x65mm, Capacity 47M³/hr of 12mtr. head, Discharge 17.4 LPS. Suitable Coupling connects motor to be fitting on suitable foundation including nut bolt and another accessory to complete job in all respect to the entire satisfaction of Engineer-in-charge. |
| 80 | Supplying, installing, testing and Commissioning 1HP 4Pole 415V, 1500 RPM foot mounted INDUCTION Motor with REDUCTION GEAR. Ratio 1:40, IE level efficiency as per 15-12615-2011. High staeting& pull up tongues accelerate the load. Suitable foundation including nut bolt and another accessory to complete job in all respect to the entire satisfaction of Engineer-in-charge. |
| 81 | Panel Board :- Supply of Totally Enclosed Dust & Vermin Proof Panel IP54 Protection Thick CRCA Sheet With Hinged Loacable Doors Inclusive Copper Crimping Interconnection, Glands, Suitable for Use of 415 V 3PH. 4 Wire 50Hz System with 16 KA Rupturing Capacity at 415 V Complete. Panel Board having size 1200mm(H) x1000mm(W) x 200mm(D) made of prestressed 165WG sheet single door and autoclaved painted .The board should comprise of rigid welded structural frames made of structural steel section of not less than 3 mm thickness .The board should be smoothly finished & free from flaws. It should have space for providing power meter. The panel board should have the following flush mounted instruments. (rate should include of all the Following items Starter: - To control the motor automatic push button, air break star-delta starter suitable for running WTP machinery having an adjustable delay relay for automatic change from star to delta in upto 20 seconds, three phase, thermal over load relays, tripping 7reset device should be provided .The starter shall be of L & T make & shall be suitable for voltage range of 350-415 V.Rating of machinery. INGOING ITEM: - MCCB 125 AMP, FP With Spreader Link 1 Nos. (L&T), VAF Meter 1 Nos. (L&T), CT Coil 100/5 3 Nos. (AMTL), INDICATOR 4 Nos. (L&T), Control Fuse 3 Nos. (REPUTED), Mannual Changeover 125 AMP 1 Nos. (L&T),OUTGOING ITEM: - MCCB 100 AMP, FP 10 KA With Spreader Link 5 Nos. (L&T), MCB TPN 25 AMP 5 Nos. (L&T), MCB DP 25 AMP 7 Nos. (L&T), ELCB 63 AMP, FP 6 Nos. (L&T), MCB DP 16 AMP 10 Nos. (L&T), MCB TPN 63 AMP 5 Nos. (L&T), MCB SP 10/15 & 16/8 5 Nos. (L&T), Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). a) Earthingwith 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 14Metre in length) |
| 82 | Supplying, installing, testing and Commissioning of Twin Type Rotary Air Blower with 5HP induction Motor for Filter Beds for the Following 94 CFM Capacity & 5 PSIG Pressure & Speed 1100 RPM Through "V" Belt or Directly Coupled though Flexible Coupling to a Tefc Motor of Suitable 5 HP Electric Motor 415 +- 10% Volts 3 Phase 50 Cycles A/C Supply. Suitable foundation including nut, bolt, belts and another accessory to complete job in all respect to the entire satisfaction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
