Tender For Pr Of Road From (I) Jagannathbari To Bhagirath Chowmuhani, L-0.300Km (Portion From Ch-0.00 To Ch-0.300 Km, L-0.300 Km), (Ii) Panchmurthi To Jagannathbari, L-0.220Km (Portion From Ch-0.00 To Ch-0.220 Km, L-0.220 Km)
Tender Value
17.42 Lakhs
Estimated cost
Bid Submission
19 Nov 2022
0 days left
EMD
34844
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sonamura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Pr Of Road From ( I ) Jagannathbari To Bhagirath Chowmuhani, L-0.300Km ( Portion From Ch-0.00 To Ch-0.300 Km, L-0.300 Km ) , ( Ii ) Panchmurthi To Jagannathbari, L-0.220Km ( Portion From Ch-0.00 To Ch-0.220 Km, L-0.220 Km ) Grouting, Patch Wbm, Re-Carpeting, Seal Coat And Other Allied Works
BOQ
| Sl. No. | Item Description |
| 1 | Patch repairing/ Maintenance of bituminous surface road usingJhama brick aggregate & Viscosity Graded bitumen (VG-30)Repairing pot-holes and making up small depressions with ramming or power rolling after removal/ disposal of disintegrated materials within a lead of 50 m, cutting pot holes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any other appropriate method including screening, cleaning of aggregates; and filling up withwith jhama chips using bitumen of VG-30 @ 54 kg per m3 of loose volume of jhama brick chips, after applying tack coat of bitumen on sides and bottom @ 0.75 kg/ sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/ sqm of prepared road surface as per direction of the Engineer-in- Charge and all as per MoRD technical specification Clauses 1900, 502, 503 and 504.. |
| 2 | Water Bound Macadam Sub-Base/ Base using jhama Brick Aggregate WBM Grading - 3Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kNin stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405. |
| 3 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surface. Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/ Sqm. |
| 4 | 20 mm thick Open-Graded Premix Carpet using Bituminous (viscocity grade/ modified bitumen) Binder:-Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscocity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508. Case -II: By Manual Means. (I)Bitumen ofVG-30 |
| 5 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.A. By Manual MeansCase - IV : Type D (premix with fine sand)I) Bitumen of VG-30 |
| 6 | Removal of Unsuitable Soil with Disposal upto 1000 m Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment/ subgrade, replacement by suitable soil, which shall be paid separately as per MoRD Technical Specification Clause 303.5.2 and as per MoRD Technical Specification Clause 302.3.11. |
AI Tender Summary
Tender Timeline
Nov 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender