Tender For Expansion Of Griil Gate At Lkt At Af Stn Bhowali
Tender Value
2.25 Lakhs
Estimated cost
Bid Submission
05 Dec 2022
0 days left
EMD
4500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhowali → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Expansion Of Griil Gate At Lkt At Af Stn Bhowali
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Nov-2022 | CRITICAL DATES | Date | 05-Dec-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork/stone boulder walling built in cement mortar or cement lime mortar, complete all as specified and directed. |
| 2 | Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 3 | Excavating in trenches not exc 1.5m wide and exc 1.5 m but n.exc 3.0 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25 cm depth in soft/loose soil complete all as specified. |
| 5 | Removing excavated soft/loose soil n. exc 50 m and depositing where directed |
| 6 | M&L for brick work with subclass \"B\"old sized burnt bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified. |
| 7 | M&L 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces of wall andfinished even and fair without using extra cement complete all as specified and as directed. |
| 8 | M&L for preparation of newly plastered surfaces by affixing 3 mm thick wall care putty and applying two coats of 100% Premium acrylic emulsion paint in camouflaging pattern (sigma MK-III pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
| 9 | Dismantling structural steel work icluding doors, gates but excluding framed truss etc., complete all as specified and directed. |
| 10 | M&L for formwork to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam; and similar work; vertical or to batterfor rough finished flat surfaces of concrete complete all as specified and directed. |
| 11 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed |
| 12 | M&L Plain cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified. |
| 13 | M&L RCC M-20, nominal mix, type A-1(1:1.5:3), using 20mm graded crushed stone aggregate inFoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 14 | M&L RCC M-20, nominal mix, type A-1(1:1.5:3), using 20mm graded crushed stone aggregate inColumns,pillars,piers,posts and struts complete all as specified and as directed. |
| 15 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting,complete all as specified and directed. |
| 16 | S & F Granite 18-20 mm Granite (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platformsincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified. |
| 17 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 18 | Ditto- all as per item No (17) above but 5 to 10mm dia as in stirrups complete all as specified. |
| 19 | M&L for framed work as in Doors, Gates, wicket Gates, brackets made with angles, round bars or tees with web and flanges cut toshape, drilled and countersunk for screw,including bending, cutting and welding angles, to make shape etc as necessary, and fixed with RCC Col , etc, , conforming to Fe.290 Gde - E-250 complete all as specified and directed. |
| 20 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 21 | S&F 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed. |
| 22 | M & Lfor preparing of new steel surfaces to receive painting,of any description over 10 cm width or girth and applying two coats of synthetic enamel paint as throughout base coat over a coat of red oxide primer and two additional coats of synthetic enamel paint as in patches of different colours for making camouflage pattern as directed at site as per existing pattern complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
AI Tender Summary
Tender Timeline
Nov 29, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 05, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender