Tender For Retrofitting To Shelka Dhanorawatersupply Schemetq. Kalambdist.Osmanabad Under Jal Jeevan Mission Water Supply Scheme Shelka Dhanora Tq Kalamb
Tender Value
68.26 Lakhs
Estimated cost
Bid Submission
14 Nov 2022
0 days left
EMD
68267
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dhanora → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Retrofitting To Shelka Dhanorawatersupply Schemetq. Kalambdist.Osmanabad Under Jal Jeevan Mission Water Supply Scheme Shelka Dhanora Tq Kalamb
BOQ
| Sl. No. | Item Description |
| 1 | SUWORK NO. 1 PERCOLATION WELLItem no 1 :- Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge. |
| 2 | Item No. 2 :-Excavation in general in hard material comp-rising of soft rock,hard roack, Manjara rock, etc. by blasting / controlled blasting, chiseling as required in wet or dry condition for head works i.e intake well. Connecting pipe . Jack well pump house supply well for lift 0.00 to 1.50 m & lead of 150m etc complete. FOR MREGS WELL12.00 to 13.50 m |
| 3 | 13.50 to 15.00 m |
| 4 | 15.00 to 16.00 m |
| 5 | ITEM NO 3 :- Excavation in general in hard material comp-rising of soft rock,hard roack, Manjara rock, etc. by blasting / controlled blasting, chiseling as required in wet or dry condition for head works i.e intake well. Connecting pipe . Jack well pump house supply well for lift 0.00 to 1.50 m & lead of 150m etc complete. FOR PWS WELL15.00 to 16.50 m |
| 6 | 16.50 to 18.00 m |
| 7 | Item no 4 :-Dewatering the excavated trenches and pools of water in the building trenches/pipeline tren-ches, well works by using pumps or other devices including desposing off water to safe dist-ance as directed by engineer-in-charge. ( Including cost of machinery, Labour charges etc ) |
| 8 | Item no 5 :- Carrying out recuperation/ yield test for asc-erting the discharge of constructed well / exca-vated profile as directed by Engineer in char-ge The test carried out by drawn down water from the well profile bellow normal sub soil water level upto full depth rise is water well profile as well as strainer suction level at pump as per design of W.S. seheme shall be recor-ded prior to the test including cost of all materials. Overhead, laborers etc. completed as directed. LPS Less than 25000 |
| 9 | Item No. 6 :-Providing Structural steel work in single stanc-hions composed of RSJ, channel etc. with caps, based, mild steel plates. angles brak-cets, as per drawing or as directed by Engi-neer-in-char-ge including cutting fabrication, making riveted / bolted welded connections and one coats of anticorrosive paint and over it two coats of oil painting etc complete. RSJ 250 X 125 MM |
| 10 | Sub work 2:ESTIMATE FOR BorewellITEM No.01 : Taking surface bore well of 150mmdia and 60M of depth (as per GSDA certificate) 2x60=120 mtr |
| 11 | ITEM No.02: Providing and supplying in standard length I.S.I. regid uplasticised P.V.C. pipes suttable for potable water with solvent cement joints / rubber ring joints including cost of cuuplers as per I.S. specification No. 4985/1988 including all local and central taxes transportation etc complete180 mm dia PVC Pipe |
| 12 | 180 mm dia PVC Pipe Cap |
| 13 | ITEM no.3 Yield oftestingborewells by air lift methods on 90 deegryVee Notch Including flushing of borewell for two hours.150.00 mm dia bore well |
| 14 | Sub work 3 : - ESTIMATE FOR PUMP ON BOREWELL Item No 1: Providing erecting and giving test of submersible pump set confirming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft, motor suitable for working on 415 V +- 10% , 3 PH , 50 HZA.C.supply with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable uction stainer.pump should have suitable discharge out let as per manufactures design.antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size erection clamo 10 mm thick shall be provided with each pump. Submersible pump 150 mm dia (with bronze/ stainless steel (CF8M) impeller) up to 8 stage head mNo of Units 1 Nos. Submersible pump of 3 BHP |
| 15 | ITEM No.02providing ISI marks G.I.pipes of following class and dia excluding GST levied by GOI&GOM in all respect inspection charges transportation tostore etc. complet as per IS- 129/2004 note one coupler shall be provided with each full lenth of pipe cost of which is included in rates below 50 mm dia GI PIPE heavy |
| 16 | ITEM No. 3Panel board inluding all access0ries angle frame, panel box,starter,main switch,capacitor set of poilet lamp volt meter,ammeter |
| 17 | ITEM NO 4. supply and erecting flat flexible 3 core 4 sq mm pvc sheathed submersible type copper cable suitably clamped at fixed interval with column pipe assembly complete |
| 18 | ITEM NO 5. Providing double flange reflux valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete50 MM REFLUX VALVE |
| 19 | SUWORK NO. 4:- PUMPING MACHINERY -5BHPMREGS WELL Item no 1 :-Providing, erecting and giving tests of submersible pump set confirming to IS 8034 and motor confirming to IS 9283, with water proof winding and discharge with stainless steel shaft. Mortar suitable for working on 415 V = 10% 3 phase 50 Hz A.C. supply with cable guard, thrush carbon/fible bearing to withstand entire hydraulic thrust with suitable suction strainer, pump should have suitable discharge outlet as per manufacture\"s design. Antithrust streamlined run and 2 pairs of erection clamps 80 mm width non return valve.Submersible pump 150 mm dia (with bronze impeller upto 8 stages).5 BHP Dishc 6463 Head 21 Mtr |
| 20 | Item no 2 :- Providing ISI mark G.I. pipe of following class and dia including all local & cenral taxes. Octroai. Inspectioncharges, transportation to store etc. complete.50 mm dia G I Heavy Class pipe |
| 21 | Item no 3 :- Providing and Fixing L.T. skeleton panel board upto 6 HP. (As per detail sheet attached) |
| 22 | Item no 4:- Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 23 | Item no 5 :-Providing and supplying ISI mark CI D/F reflux valves ( non- return valves ) of following dia inc-luding all taxes ( Central and Local) railway freig-ht, inspection charges unloading from railway wagon, loading into truck, transportation upto etc complete80 mm dia reflux valves |
| 24 | item no 6:- Providing and supply ISI Standard CI double fla-nged pipes including all taxes. Railway freight. Insurance unloading from railway wagon, loading into truck transpot to stores / sites, unloading etccomplete as directed by Engineer- in-charge80mm CIDF Pipe |
| 25 | Item no 7 :- Providing, erecting, double flange sluice valveconforming forIS 2906/14846 incuding worn gear arrangements as per tes pressure stainless steel spindlle, caps including all taxes transportation etccomplete.80 mmSluice Valve (without bypass) |
| 26 | Item no 8:- Providing and supplying ISI standard CI flanged/ S&S specials including all taxes ( central& local) railway freight, insurance, unloading from railway wagon, loading into truck transport to dep-artmental store / site, unloading stacking etc. complete. |
| 27 | item no 9:- Providing and erecting pressure gauge of required capacity complete with syphon tube, isolating cock suitable for 12mm dia GI pipe. Pressure gauge shall be installed as directed, with tapping on rising main pressure gauge (100 mm dia) |
| 28 | item no 10 :- Providing earthing with galvanized iron earth plate size 60 x60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP. |
| 29 | SUWORK NO. 5:- PUMPING MACHINERY -5BHPBHARAT NIRMAN WELL Item no 1 :-Providing, erecting and giving tests of submersible pump set confirming to IS 8034 and motor confirming to IS 9283, with water proof winding and discharge with stainless steel shaft. Mortar suitable for working on 415 V = 10% 3 phase 50 Hz A.C. supply with cable guard, thrush carbon/fible bearing to withstand entire hydraulic thrust with suitable suction strainer, pump should have suitable discharge outlet as per manufacture\"s design. Antithrust streamlined run and 2 pairs of erection clamps 80 mm width non return valve.Submersible pump 150 mm dia (with bronze impeller upto 8 stages).5 BHP Dishc 6463 Head 21 Mtr |
| 30 | Item no 2 :- Providing ISI mark G.I. pipe of following class and dia including all local & cenral taxes. Octroai. Inspectioncharges, transportation to store etc. complete.50 mm dia G I Heavy Class pipe |
| 31 | Item no 3 :- Providing and Fixing L.T. skeleton panel board upto 6 HP. (As per detail sheet attached) |
| 32 | Item no 4:- Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 33 | Item no 5 :-Providing and supplying ISI mark CI D/F reflux valves ( non- return valves ) of following dia inc-luding all taxes ( Central and Local) railway freig-ht, inspection charges unloading from railway wagon, loading into truck, transportation upto etc complete80 mm dia reflux valves |
| 34 | item no 6:- Providing and supply ISI Standard CI double fla-nged pipes including all taxes. Railway freight. Insurance unloading from railway wagon, loading into truck transpot to stores / sites, unloading etccomplete as directed by Engineer- in-charge80mm CIDF Pipe |
| 35 | Item no 7 :- Providing, erecting, double flange sluice valveconforming forIS 2906/14846 incuding worn gear arrangements as per tes pressure stainless steel spindlle, caps including all taxes transportation etccomplete.80 mmSluice Valve (without bypass) |
| 36 | Item no 10:- Providing and supplying ISI standard CI flanged/ S&S specials including all taxes ( central& local) railway freight, insurance, unloading from railway wagon, loading into truck transport to dep-artmental store / site, unloading stacking etc. complete. |
| 37 | item no 11:- Providing and erecting pressure gauge of required capacity complete with syphon tube, isolating cock suitable for 12mm dia GI pipe. Pressure gauge shall be installed as directed, with tapping on rising main pressure gauge (100 mm dia) |
| 38 | item no 12 :- Providing earthing with galvanized iron earth plate size 60 x60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP. |
| 39 | SUWORK NO. 6 :- RISING MAIN Item No.1- Excavation for foundation/ pipe trenches in earth soils of all types sand, gravel,soft murum including removing the excavated materialup to distance of 50 m & lift as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation etc complete. ( Lift up to 1.50 m ) |
| 40 | Item No. 2 :- Excavation for foundation/ pipe trenches in hard murum including removing the excavated material up to distance of 50 m & lift as below, stacking & spre-ading as directed by Engineer-in-charge, normal dew-atering, preparing the bed for the foundation & excludingfilling etc. complete ( Lift up to 1.50 m ) |
| 41 | Item No. 3 :- Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material up toa distance of 50 m etc complete |
| 42 | Item No. 4 :- Excavation for foundation/ pipe trenches in hard rock by controlled blastingincluding trimming & leveling the bed by chiselling where necessary & removing the excavated material & stacking it measurable he-aps with in a distance of 50 m & lift as below, etc complete(Lift up to 1.50 m ) |
| 43 | Item No. 5 :- Filling in plinth and floors murum bedding in trenches with approved murum fromfoundation 15 cm to 20 cm layer including watering andcompaction etc. complete. |
| 44 | Item No. 6:-Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material likeechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.A.) PE-100 a) 6 Kg/Sq. cm : 90 MM Dia 6 Kg/Cm2 HDPE Pipe Line |
| 45 | 110 MM Dia 6 Kg/Cm2 HDPE Pipe Line |
| 46 | Item No. 7 :- Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below a) 100 mm dia.G I Pipe (Medium class) |
| 47 | Item No. 8 :- Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST leviedby GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)100 mm Dia non-return valves |
| 48 | 80 mm Dia non-return valves |
| 49 | Item No. 9 :Providing double flanged short body pattern type manually operated Butterfly Valve having body.disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retainning ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charge transporation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.excluding C.C. foundation/structural steel support.100 mm Dia SCOUR valves |
| 50 | Item No. 10 :-Providing & supplying at site of work CI/HDPE/ PVC /GIspecials suitable for above said pipes including cost of all taxes fright chargesoctroi loading Unloading conveyanceetc. |
| 51 | Item No.11 :- Providing , Supplying,double ball Air valves as per IS-10845 and MJP’s standard specificationof approved make and quality of following dia and class including all taxesetc. complete50 mm dia Doubleball Air valve |
| 52 | Item No. 12 :- Lowering laying and jointingHDPE pipes and specials of following class and diameter including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per Is codewith cement solvent joint etc complete.90mm dia HDPE pipe 6 Kg/cm2 |
| 53 | 110 MM Dia 6 Kg/Cm2 HDPE Pipe Line |
| 54 | Item No. 13 :- Lowering ,laying and jointing G.I.pipes and specials of following class and dia. C.I./M.S. specials of following dia. Including conveyance from store to site of woks all labour ,giving satisfactory hydraulic test etc comp. Either under ground or in vertical position as directed by Engineer in charge a) 100 mm dia.G I Pipe (Medium class) |
| 55 | Item No. 14 :-Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves ( Rate for all class of valves) 100 mm Dia NON RETURN VALVE / SLUICE VALVE |
| 56 | 80 mm Dia NON RETURN VALVE / SLUICE VALVE |
| 57 | Item No. 15:- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position 90 mm HDPE 6 kg/cm^2 |
| 58 | 110 MM Dia 6 Kg/Cm2 HDPE Pipe Line |
| 59 | Item No. 16:-Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. |
| 60 | Item No. 17 :- Providing and laying in sity 1:2:4 (M-150) grade of C.C. oftrap/granite/ quartzite/gneiss metal for foundation and bedding including dewatering form work compacting and curing finishing etc complete P.C.C(M-150) |
| 61 | Item No. 18:- Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M 150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) upto 150 mm |
| 62 | Item No. 19:- Refilling the trenches with availableexcav-ated stuff with soft material first over pipe line and then hard material in 15 cm layers with all leads and lift including consolidation surcharging etc complete. |
| 63 | SubWork no. 7 - proposedESR Cap74000 lit height 12 m Item No.1-Dismantling of ESRs of various capacities and heights using crane (10 MT capacity) and handing over M.S./ C.I./G.I. pipes, valves, bends, etc. to the Department. However taking steel reinforcement by the dismantling agency including removing dismantled materials from site and disposing them at suitable place as directed, etc. complete. |
| 64 | Item No.2 :Designing (aesthetically), and constructing RCC Elevated Service Reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/cfor E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material chargesincluding lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design. providing and fixing accessories such as Stainless steel ladder inside and M.S. ladder with G.I. railingoutside, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staire case from ground level to roof level, M.S.Grill gate of 2 Mtrs height with locking arrangement, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylic emulsion with silicon additives paint to the structure including roof slab and epoxy paint to internal surface & anti-termite treatment for underground parts of the structures and giving satisfactory water tightness test as per I.S. code, The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge.Cap 74000 lit height 12 m |
| 65 | Item No.3 :Providing & supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance , unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge.Inlet + Outlet + Bypass + Overflow125 mm dia C.I.D.F.PIPE |
| 66 | 100 mm dia C.I.D.F.PIPE |
| 67 | Item No.4 : Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. complete 80 mm Dia Sluice valve - Inlet +Outlet + Overflow |
| 68 | 125 mm Dia Sluice valve - Inlet +Outlet + Overflow |
| 69 | Item No.5 :Providing And supplying ISI standard CI Flanged /s &S Specials Including all Statutory Duties &taxes such as GST Levied by GOI &GOM in all Respect.Railway Freight Insurance Unloading From Railway wagon,Loading into truck Transport to Departmental Store /Site UnloadingStacking etc Complete D/F Specials 300 D/F Specials Upto and Including150 mm 80 mm to 300 mm dia |
| 70 | SUWORK NO. 8 :- DISTRIBUSTION SYSTEM Item No. 1 :- Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suita-ble for potable water with solventcement joints inclu-ding cost of couplers, as per IS speci-fication no. 4985/ 1988 including all local and central taxes, transporation, etc complete 90 mm dia 4kg/cm2 P.V.C. PIPE |
| 71 | 110 mm dia 4kg/cm2 P.V.C. PIPE |
| 72 | 140 mm dia 4kg/cm2 P.V.C. PIPE |
| 73 | Item No. 2 :- Providing & supplying at site of work CI/ PVC /GIspecials suitable for above said pipes including cost of all taxes fright chargesoctroi loading Unloading conveyanceetc. |
| 74 | Item No. 3 :-Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below 80 mm dia.G I Pipe (Medium class) |
| 75 | 100 mm dia.G I Pipe (Medium class) |
| 76 | 125 mm dia.G I Pipe (Medium class) |
| 77 | Item No. 4 :- Providing double flange sluice valve conform-ing forIS 2906/14846 incuding worn gear arran-gements as per test pressure stainless steel spindlle, caps including all taxes transpor-tation etccomplete.80 mm dia Sluice valve |
| 78 | 100 mm dia Sluice valve |
| 79 | 125 mm dia Sluice valve |
| 80 | Item No. 5 :-Excavation for foundation / pipe trenches in earth.Soils of all types. Sand, gravel and soft murum, including removing the excavatedmat-erial up to a distance of 50 meters andlifts as below, stacking and spreading as directed, manual dewatering, etc complete |
| 81 | Item No. 6 :- Excavation for foundation / pipe trenches inhard murum including removing the excavatedmaterial up to a distance of 50 meters andlifts as below, stacking and spreading as directed, manual dewatering, preaparing the bed for foun-dation andetc complete.lift 0.00 to 1.50m |
| 82 | Item No. 7 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry Found-ation asphalt road including removing the exca-vated materialup to a distance of 50 m beyond area and lifts as below, stacking as directed by Engineer- in- charges etc complete lift 0.00 to 1.50m |
| 83 | Item No. 8 :- Excavation for foundation / pipe trenches in Hard rock& concrete by controlled Chisseling,including trimming & levelling the bed by chisseling where where lifts as below, stacking as directed by Engineer- in- charges normal dewatering, etc complete |
| 84 | Item No. 9 :-Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction etc complete. |
| 85 | Item No. 10 :- Lowering laying and jointing PVC pipes and specials of following class and diameter inclu-ding cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydr-aulic testing as per Iscodewith cement solvent joint etc complete90 mm dia 4kg/cm2 P.V.C. PIPE |
| 86 | 110 mm dia 4kg/cm2 P.V.C. PIPE |
| 87 | 140 mm dia 4kg/cm2 P.V.C. PIPE |
| 88 | Item No. 11:- Lowering ,laying and jointing G.I.pipes and specials of following class and dia. C.I./M.S. specials of following dia. Including conveyance from store to site of woks all labour ,giving satisfactory hydraulic test etc comp. Either under ground or in vertical position as directed by Engineer in charge c) 80 mm dia.G I Pipe (Medium class) |
| 89 | 100 mm dia.G I Pipe (Medium class) |
| 90 | 125 mm dia.G I Pipe (Medium class) |
| 91 | Item No. 12 :- Lowering laying and jointing in position following CI.D/F reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete, 80 mm dia Sluice valve |
| 92 | 100 mm dia Sluice valve |
| 93 | 125 mm dia Sluice valve |
| 94 | Item No. 13 :-Hydraulic testing of PVC pipe line tospecified pressure including cost of allmaterials and labour and water for testing forspecified length including cutting, placing endcap making arrangement for filling safe waterusing reciprocating type pumps which shouldbe able to provide specified test pressuregauges and other necessary equipments,labour, operation charges, etc. required fortesting. The rate under this item shall alsoinclude cost of retesting, if necessary and reinstating to original position.90 mm dia 4kg/cm2 P.V.C. PIPE |
| 95 | 110 mm dia 4kg/cm2 P.V.C. PIPE |
| 96 | 140 mm dia 4kg/cm2 P.V.C. PIPE |
| 97 | Item No. 14 :- Providing and fixing C.I. road box including loading, unloading and carting to site of workincluding all necessary excavation in all typesof strata and fixing in murum packing, etc.complete 100 x 225 mm (20 kg) |
| 98 | 225 x 300 mm (40 kg) |
| 99 | Item No. 15 :-Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. |
| 100 | Item No. 16 :- Refilling the trenches with availableexcavated stuff with soft material first over pipelineand then hard material in 15 cm layers with all leads and lift including consolidation surcharging etc complete |
| 101 | SUBWORK NO. 9 :- SERVICE CONNECTIONItem No. 1 :- Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour ,UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/ Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm / 20mm / 25mm respective Dia Heavy duty Brass / Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends, couplers, Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap,GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively ofrequired length for Road crossing, including requird labour for excavation inall types of strata up to the depth of 0.75 more as per site requirement, all types ofplumbing fittings, refilling , Closing thewater supply in that area, dewatering,hydraulic testing and restarting the water supply ,transportation of material etc.complete as directed by Engineer in A) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul) for HDPE & PVC pipe11) Service Connection 15 mm dia MDPE / UPVC Pipe without road crossing |
| 102 | 2) Service Connection 15 mm dia MDPE / UPVC Pipe with road crossing |
| 103 | SUBWORK NO. 10 :-NAME BOARDItem No. 1 :- Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 104 | SUBWORK NO. 11 :-TRIAL & RUN Item No. 1 :- Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. |
| 105 | Item No.2:- MSEB Charges for pumps |
| 106 | Item No. 3 :- Material Bleaching Powder |
AI Tender Summary
Tender Timeline
Nov 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 16, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender