Tender For Provn Of Certain Revenue And Minor Works At Various Locations At Afs Chakeri Kanpur
Tender Value
15.90 Lakhs
Estimated cost
Bid Submission
23 Nov 2022
0 days left
EMD
31800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chakeri → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Certain Revenue And Minor Works At Various Locations At Afs Chakeri Kanpur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and exceeding 1.5 m, but not exceeding 3.00 m, in depth for foundations laying of cable etc. and getting out complete all as specified and as directed. |
| 2 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick with soft/loose soil complete all as specified and as directed. |
| 3 | Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 4 | M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified and directed. |
| 5 | M&L laying well burnt old sizebricks, sub class \"B\" bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed. |
| 6 | Supply, laying, jointing and testing LT under ground electric power cable crossed linked polyethylene (XLPE) insulated, galvanised steel strip or wire armoured,ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 50 sqmm cross sectional area, 3.5 core, laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed. Note :-Excavation, earth work, sand cushioning, protection bricks/ tiles/ block andpipe shall be measured and paid separately under appropriate items of BOQ. |
| 7 | Boring / drilling (Horizontly) manually/using machines under existing road Max 10.00m in width suitable for passing GI tubing 80 mm bore complete all as specified and as directed.Note:- GI Pipe shall be measured and paid separately. |
| 8 | S&F mild steel galvanized tubes light grade ISI marked 40mm bore laid in trenches / road crossing/ fixed to pole /walls/path/drain/floor etc with and including fittings if any required complete all as specified and as directed. |
| 9 | Supply, drawing, connecting and testing of3 core, 1.5 Sqmm PVC insulated and PVC round sheathed copper conductor (flexible) industurial cable, 1100 Volts conforming to IS: 694 in steel tubular poles from Junction box to flood light fitting including providing suitable copper lugs complete all as specified and as directed. |
| 10 | Supply, erection and installation of 16.00 m High mast shaft of approved make with raising system hot dip, having pole sheet thickness 3mm,Top dia minimum 150mm, Bottom dia 360mm, base plate 32mm thick, designed for wind speed 47 m / sec as per IS 875 part- III with head frame, winch mounting bracket, luminaries carriage suitable to install 08 nos of 200 watt flood light. Luminaries in symmetrical arrangement with raising lowering system comprising in double drum winch, 6mm diameter SS wire rope, trailing cable, connector, suitable integral tool motor 1.5 HP, manual handle, junction box, lightening funnel including wiring material from junction box to individual luminaires with MCBs in base compartment complete all as specified and as directed.Note : 1. Foundation bolts (M30x850mmx8 Nos) shall be of hot dip galvanized steel with high tensile strength along with nuts, washers, anchor plate and common template, suitable of LED type single dome aviation obstruction light including outdoor stand mounted feeder pillar, IP 55 made with 3.15 mm thick CRCA sheet including 01 Nos 32 Amps TPN MCB as incomer, single dial timer switch, 22 Amp TP contactor for the automatic switching of luminaries, power tool control with 02 Nos 9 Amp contactors and raise lower push button of incoming 35 Sqmm and outgoing 16 & 2.5 sq mm terminals and including construction of shallow foundation with M-25 grade concrete for the high mast considering the safe soil bearing capacity at site as 10 T/Sq mtr at 2 meter depth. The cost of construction of RCC foundation including material shall be deemed to be included quoted unit rate.2. Design, drawings and all data sheets for the foundation and highmast/pole work shall be as per manufacturer instruction and same shall be submitted to GE for approval prior to execution of work. Cost of this provision shall be deemed to be inclusive in quoted unit rate. 3. Fixing of LED flood light shall be deemed to be inclusive in quoted unit rate. LED Lights shall be measured and paid seprately under supply only. |
| 11 | Supply only LED flood light luminaire with a of non corrosive high pressure ADC with corrosion resistant powder coating and anti dust exposed lense to ensure protection heat resistant toughened glass provide with silicon gasket for efficient ingress protection.The luminaires should have CRI > 70,SDCM<5 and CCT of 5700K and shall be compliant with IP66 and IK08 classification,Luminaires shall be designed to emit at least 14500 lumens with maximum system wattage of 120w at a system efficacy of at least 120Lm/W.The luminaire shall be designed so as to ensure lumen depreciation of upto 30% over 50k burning hours @ design ambient temp 35 deg C. The luminaire should have fins on the back to ensure good heat dissipation and prevent dirt from setting on the luminaires along with aiming angle scale.The electronic driver should be fully integrated and shall have a power factor >0.95 and THD<10% with a mininimum inbuilt surge protection of 4kV internal & 10kV/kA external and suitable for operating range 140-270 AC & operating temperature range -10 degree c to 50 degre.The driver should be BIS approved,fully potted and encapsulated with 440V high cutt off : 325 V (+/- 15 V) and auto restart function should be avalaible in luminairies and Stress voltage protection for 8hrs.The luminaire should comply with all the required IEC and IS standards complete all as specified and as directed.Make: Wipro Cat Part No. LF34-132-060-57-XX or equivalent model in Crompton Greave / Havells / Philips as approved by GE.Note: Sample of luminaire shall be submitted to Engr-in-Charge alongwith technical specifiactions for approval of GE before procuring the lot of luminairies. |
| 12 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of 32X6 mm GI strip by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including PCC cover and frame, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in earthing pit chamber with 40mm thick RCC cover with (1:1.5:3) nominal mix using 20 mm graded crushed stone aggregate reinforced with 6 mm dia mild steel bars @ 100mm c/c, MS funnel with wire mesh GI pipe 20 mm dia light grade for watering and GI pipe 40mm dia light grade for the protection of GI strip from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50.00 m all as specified as shown in electrical plate No 3 SSR Part-I(2009). PCC chamber shall be constructed at least one metre away from the earth pit and GI pipe fittings for watering shall be provided up to chamber and cost of the same is deemed to be included in the rate of earthing complete all as specified and as directed.Note: Earth wire / earth strip upto 7.5 m from earth test point shall be deemed to be included in quoted unit rate. |
| 13 | Supply, installation, commissioning and testing submersible pump set of capacity 30 HP, 25000 GPH at 86.00 m head inside the bore well comprising of bronze impellors in CI casing with stainless steel shaft, leaded bronze bearing / bushes stainless steel shaft, sleeve complete all as per IS 8034 complete with submersible motor AC 3 phase, 50 Hz, 380 to 440 Volt all as complete all as specified and directed.Make:- KSB/Kirloskar/Crompton Greaves |
| 14 | Supply, installation, commissioning and testing of open submersible monoblockpump set of capacity 25 HP at 60.00 m head complete all as specified and directed.Make:- KSB/Kirloskar/Crompton Greaves |
| 15 | S&F Electric cable for submersible pump set, flat 16 Sqmm 3 core stranded copper conductor PVC sheathed cable with and including steel rope for support of cable from submersible pump to clamp at ground level complete all as specified and directed.Make:- Finolex/Paragon/Havells |
| 16 | Supply, laying, jointing and testing LT under ground electric power cable crossed linked polyethylene (XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 16 sqmm cross sectional area, 4.0 core, laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts, bolts, washers complete all as specified and directed. Note :-Excavation, earth work, sand cushioning, protection bricks/ tiles/ block andpipe shall be measured and paid separately under appropriate items. |
| 17 | S&F wheather proof pole mounting junction box, base and door of junction boxmade out of SMC having outside dimension 215x165x90mm, inside dimension200x150x75mm, single door front openable provided with hinged cover and locking arrangements with 4 Nos aluminium bas bar 63 Amps, mounted on porcelin insulator including S&F MCB SP 10 - 1No, fixed on box in Din rail complete with electrical connection fixed to pole with suitable sizeFI clamp nut bolts and washer including embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of junction box body complete all as specified and as directed. |
| 18 | Supply, erection and installation post top lantern antique type black colour 230 V AC, 60 W outdoor type with dimension 16x16x25 cm in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete lamp junction box, lightening funnel including wiring material from junction box to individual luminaires with MCBs in base compartment. Foundation bolts shall be of hot dip galvanized steel with high tensile strength along with nuts, washers, anchor plate and common template, suitable for MS of height 2.5 RM of size 40 mm outer dia pipe including 01 Nos 16 Amps SPN MCB as incomer and construction ofshallow foundation with M-25 grade concrete for the post top lantern considering the safe soil bearing capacity at site as 10 T/Sqm at 1.00 m depth.Note:- The cost of construction of foundation including material shall be deemed to be included quoted unit rate. |
| 19 | S&F single pointed air termination aluminium rod 12mm dia 300mm long complete all as specified and as directed. |
| 20 | S&F aluminium strip 25mm x 3.15mm complete with saddles and fixing screws for roof conductors/down conductors complete all as specified and as directed. |
| 21 | S&F test point terminal block made of gun metal of phosphor bronze of size 75mm x 75mm x 25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexognal head screw of brass fixed to wall complete all as specified and as directed. |
| 22 | S&F GI Pipe light grade of size 40mm dia for errection of lightening arrester complete all as specified and directed. |
| 23 | S&F GI Pipe light grade of size 50mm dia for errection of lightening arrester complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Nov 03, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender