Tender For Construction Of Boys Toilet At Balarampur High School
Tender Value
2.49 Lakhs
Estimated cost
Bid Submission
12 Nov 2022
0 days left
EMD
4995
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tufanganj → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Boys Toilet At Balarampur High School
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches of drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing. Spreading or stacking the spils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Earth work in filling foundation trenches or plinth with good layers not exceeding 15cm including watering ramming etc by layer complete (Payment to be made on basis of measurement of finished quantity work) (a) With earth obtained from excavation of foundation |
| 3 | (b) With Carried Earth arranged by the contractor within a radius of 3 km yto 5km incl. Cost of carried earth |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 5 | Cement Concrete with 30mm down graded shingles excluding shuttering N.B. Variety.A) 1:3:6 proportin |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.for works in foundation,basement and upto roof of ground floor / upto 4.0m. i. Tor steel / Mild steel |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation |
| 9 | (a) 25 mm to 30 mm wooden shuttering as per decissaion and direction |
| 10 | Brick work with 1st class bricks in cement mortar (4:1) In foundation and plinth. |
| 11 | 25mm thick damp proof course with cement concrete with stone chips (1:1.5:3) (with graded stone aggregate 10mm nominal size) and admixture of water proofing compound as per manufacturer\"s specification |
| 12 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. |
| 13 | Supplying fitting and fixing 1st quality Ceramic Tiles to walls and floors to match with the existing work and 4nos of key stones 10mm fixed with Araldide at the back of each tile and finishing the joints with white cement mixed and colouring oxide required to match the colour of tiles including roughening of concrete surface if necessary or by synthetic adhesive and grout materials etc With Sand Cement Mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @2.91 kg/sqm & joint filling using white cement slurry @ 0.20 kg/sqm (a) Area of each tile up to .09 sqm(i) Coloured decorative(A) Wall |
| 14 | -do- (b) Floor |
| 15 | Supplying 15mm thick M.S. Sheet & fixed on one or both faces of MS/WI gate etc |
| 16 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor). with 6:1 cement mortar 15 mm. thickplaster (outer Portion) |
| 17 | b)20 mm. thickplaster (1:6) upto 4m |
| 18 | c) With (1:4) Cement mortar10mm thick |
| 19 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. |
| 20 | (A) Supplying fitting & fixing door frame with MS angle as par drawing & direction of required section the holes for counter sunk machine screw & nuts such as to fit 8 to 10 mm Iron screw. The counter sunk nut to be welded. The nuts are to be welded after careful checking with screw. All welding spots should be properly filed or rounded smooth incl. cost of welding hinges for hinge cleats lugs for hasp bolt socket bolt etc & necessary MS clamps of 25 mmX6mm flat 225 mm long as per direction welded to the frame fitted & fixed in position excluding cost of concrete |
| 21 | Supplying fitting fixing MS Clamps for door & window frames made of flat bent bar end fabricated with necessary screws etc by cement concrete (1:2:4) as par direction (cost of concrete will be paid seperately) (a) 40mmX6mm- 250mm long |
| 22 | Iron butt hinges fitted & fixed with new screw |
| 23 | Iron hasp bolt of approved quality fitted & fixwed complete (oxidised) with 16mm dia rod with centre bolt & round fitting (c) 300mm long |
| 24 | Iron Socket bolt fitted & fixed complete (d) 225mm long x 10mm dia bolt |
| 25 | Priming one coat on steel or other metal surface with syntheticoil bound prinmer of approved quality including smoothening surfaces by sand papering etc. |
| 26 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sandparpering etc. in cluding using of approved putty etc. on the surface , if necessary.a) On steel or other metal surface: |
| 27 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreouschina ware of approved make complete in position with necessary bolts,nuts etc.(a) With \"P\" trap (with vent) |
| 28 | Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings.White |
| 29 | Supplying,fitting and fixing flat back urinal……….ii)470mm X0280mm X 340mm |
| 30 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992single socketed 3m length, 110 mm dia |
| 31 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992vent cowl, 110 mm dia |
| 32 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785(a) For Exposed Work15 mmdia |
| 33 | Supplying, fitting and fixing bib cock or stop cock.(f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent) 15mm dia |
| 34 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer. 500 ltr capacity |
| 35 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.a) for depth up to 150.00m..40mm dia |
| 36 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 40 mm dia |
| 37 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.. 40 mm dia |
| 38 | Applying decorative cement base paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concreted surface) as per manufactures specification(two coats) |
| 39 | Supplying fitting fixing plug of approved make conforming to I.S. specification. 50mm dia |
| 40 | Supplying fitting and fixing 0.5 HP motor with all necessary connection |
| 41 | GST(12%) |
| 42 | LABOUR CESS(1%) |
AI Tender Summary
Tender Timeline
Nov 03, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender