Law and Justice Local Bodies Closing in 0 days TDR #34646101

Tender For Construction Of Patient Party Waiting Shed, Urinal,Vat And Water Arrangement At Ruidanga Sc Under Mathabhanga-Ii Dev Block In The District Of Cooch Behar(Conversion Of Rural Phcs And Sub-Centers Into Health And Wellness Center (Su-Sasthya Ken

Issued by Local Bodies · mathabhanga, West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Nov 2022
0 days left
EMD
8950
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
mathabhanga → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Patient Party Waiting Shed, Urinal, Vat And Water Arrangement At Ruidanga Sc Under Mathabhanga-Ii Dev Block In The District Of Cooch Behar ( Conversion Of Rural Phcs And Sub-Centers Into Health And Wellness Center ( Su-Sasthya Kendra / Hw

BOQ

Name of Work: CONSTRUCTION OF PATIENT PARTY WAITING SHED, URINAL,VAT & WATER ARRANGEMENT AT DIFFERENT SUB CENTRE UNDER MATHABHANGA-II DEV BLOCK IN THE DISTRICT OF COOCH BEHAR(CONVERSION OF RURAL PHCs &SUB-CENTERs INTO HEALTH AND WELLNESS CENTER (SU-SASTHYA KENDRA /HWC). Name of SC:Ruidanga SC
Sl. No. Item Description
1PATIENT PARTY WAITING SHED
2Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete
3Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
4(a) With earth obtained from excavation of foundation
5(ii) With carried earth arranged by the contractor within a radius of 1 km. including cost of carried earth.
6Single brick flat soling of picked jhama brick including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.
7Cement concrete with 30 mm down graded shingles excluding shuttering. In ground floor.a. 6:3:1 proportion.
8Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. b. River bazree.
9Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.for works in foundation,basement and upto roof of ground floor / upto 4.0m. i. Tor steel / Mild steel.
10Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor)
1125 mm to 30 mm shuttering without staging in foundation
12Brick work with 1st class bricks in cement mortar (6:1)In foundation and plinth
13125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor.
14M.S. orW.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor.Grill weighing above 10 kg./sq.m.and upto 16kg/sq.m.
15M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 8161969 & IS: 9595 using electrodes of approved. . . . . . . . . . finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.
16Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). a) With 0.5 mm thick sheet
17Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping). (A) 300 mm lapping each way.(a) With 0.60 mm sheet
18Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately).(A) For Exposed Work. (ii) 80 mm dia. medium quality
19Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor).
20a) with 6:1 cement mortari) 20 mm. thickplaster (outer Portion)
21a) with 6:1 cement mortari) 15 mm. thickplaster (outer Portion)
22ii) 10 mm. thick plaster(with4:1 cement mortar)
23Applying decorative cement based paint of approved quality……etc.
24Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the. . . . . . . . . . . . of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
25(B) Wall with Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative (b) Area of each tile above 0.09 Sq.m
26(A) Floor with Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m(i) Coloured decorative (b) Area of each tile above 0.09 Sq.m
27Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling]Red Variety(i) 25 mm. thick
28Priming one coat on timber, plastered or on steel or other metal surface with syntheticenamel/oil bound prinmer of approved quality including smoothening surfaces by sand papering etc.
29On steel or other metal surface:Two coats( except white in shade )
30(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sandparpering etc. in cluding using of approved putty etc. on the surface , if necessary.
31On steel or other metal surface: With super gloss (hi-gloss)Two coats( except white in shade )
32Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). Bansal
33(e) 40 mm dia.(medium Quality)
34Supply of G.I pipes with socket.
35(ii) 40 mm dia. medium quality( Tata)
36Supplying PVC strainer of approved make with adapter conforming toI.S.12818 specifications.
37(i) 40 mm dia.
38Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets
39(i) For 40 mm dia. tube well
40Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(a) For depth upto 150 metre.
41(i) 40 mm dia. boring etc.
42Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,. . . . . . . . . . . . . . . above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work
43iii) 15 mm dia. Medium quality.
44iii) 25 mm dia. Medium quality.
45Supplying fitting & fixing 1.0H.P crompton pump including instralation charges.
46Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(b) 1000 litre capacity
47Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity.
48Labour for punching hole in plastic water storage tank upto 50 mm dia.
49Construction of C.C. (1:2:4) platform 100mm thick of dia 1.80m with drain of length 1.20 (av.) with 0.15x0.15 passageover a layer of 75mm thick P.C.C. (1:3:6) and a layers of S.B.F.S. along with 1:2:4 cement concrete of sec. 0.125m x 0.15m along the periphery of the platform including necessary earth work, shuttering etc. with plastering (1:4) of sand & cement with neat cement finishing and side dressing at different pin pointed site as per direction of E.I.C.
50(i) 40 mm dia. boring etc.
51Supplying fitting fixing 30 mm th factory made solid pannel PVC door Shutter…..
52Supply and installation of water purifier ( Kent RO or similar)
53Labour Welfare Cess @ 1.00%
54GST @ 18%

AI Tender Summary

OUR REF NO 34646101
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 11-11-2022
Authority
Authority Name District Magistrate
Work Description Construction Of Patient Party Waiting Shed, Urinal, Vat And Water Arrangement At Ruidanga Sc Under Mathabhanga-Ii Dev Block In The District Of Cooch Behar ( Conversion Of Rural Phcs And Sub-Centers Into Health And Wellness Center ( Su-Sasthya Kendra / Hw
Basic Detail
Tender No NIT. No. 22/MTB-II PS /2022-23
Bidding Type Tender
Location
City mathabhanga
State West Bengal
Key Dates
Publish Date 03 Nov 2022
Submission Date 11 Nov 2022
Open Date 14 Nov 2022
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 8950
Exemption Not Available
Document List
58642e03-651c-4fda-ba00-6441f3e13362.html
BOQ_826897.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 11, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 14, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

58642e03-651c-4fda-ba00-6441f3e13362.html

xls

BOQ_826897.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender