Tender For Partition Work Of Proposed Conference Room And Other Office Spaces At Ground Floor Of Administrative Building, Teesta-Vi Hep, Balutar
Tender Value
9.93 Lakhs
Estimated cost
Bid Submission
04 Jan 2023
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
singtam → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Partition Work Of Proposed Conference Room And Other Office Spaces At Ground Floor Of Administrative Building, Teesta-Vi Hep, Balutar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Nov-2022 | 1St Corrigendum | Date | 05-Dec-2022 |
| 2 | 09-Dec-2022 | 2nd Corrigendum | Date | 16-Dec-2022 |
| 3 | 17-Dec-2022 | 3rd Corrigendum | Date | 24-Dec-2022 |
| 4 | 28-Dec-2022 | 4th Corrigendum | Date | 04-Jan-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 2 | Removing dry oil bond distemper by scrapping, sand papering and preparing the surface smooth including repairs to scratches etc complete. |
| 3 | Providingandpaintingwithreadymixedpaintof approved quality and shade with two or more coats to give an even and smooth shade including cleaning the surface complete on old surface. |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer. |
| 6 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 7 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mmof the Engineer in Charge but excluding the cost of painting with :FuIIy Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin-charge and as per manufacturer\"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. |
| 8 | Providing and fixing false ceiling at all heightincluding providing and fixing of frame work made of special sections pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mmlong with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre„ excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I):2011 (Board with BIS Certification marks) |
| 9 | Providing and installation of wall panelling made of Timber (Pinewood or equivalent) panel (Tongue and Groove paneIIing)with minimum size of 127 x 12 mm with Furring Strips as framework system with provision of wainscotting at the top and skirting and base shoe at the bottom with necessary nails, screw ,etc including varnishing on the finished surface all complete as per drawing and direction of the Engineer in charge. |
| 10 | Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, AI snap beading for glazing / paneling CP brass/ stainless screws, all complete as per design and drawings and the direction of the Engineer - in -Charge. |
| 11 | Providing and fixing prelaminated sheet three layer medium density (exterior grade) particle board grade - I type - II confirming IS 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in panelling fixed in Aluminium doors, wndows, shutters and partition frames with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in-Charge. |
| 12 | Providing and fixing glazing in Al. doors and windows ventilator shutters and partitions etc. with PVC / neosprene gasket with CP brass / stainless steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge. |
| 13 | Providing and fixing Tower bolt 150x10mm with necessary screws etc complete-Aluminum |
| 14 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete-Aluminum |
| 15 | Providing and Fixing Hydraulic door closer withaccessories and screws complete. |
| 16 | Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete-Brass (C.P) |
AI Tender Summary
Tender Timeline
Dec 28, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 05, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Dec 16, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Dec 24, 2022
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 04, 2023
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 04, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender