Tender For Maintenance And Repairing Work At Zonal Accounts Office, Bareilly, lucknow-Uttar Pradesh

Tender For Maintenance And Repairing Work At Zonal Accounts Office, Bareilly- 1 Dismantling Existing Plaster Including Disposal Of Refuse Asdirected By The Engineer-I / C Within A Distance Of 60 M. 2 Scrapping Old White Or Colour Wash Or Distemper Including Disposal Of Refuseas Directed By The Engineer-I / C Within A Distance Of 60 M. 3 Dismantling Brick Work Or Stone Work In Lime Or Cement Mortar Andincluding Stacking Of Materials As Directed By Theengineer-In-Charge Within A Distance Of 60 Metres. 4 Cement Concrete With 2Cm Gauge Approved Hard Stone Ballast, Coarse Sand ( F.M. 1.8 To 2.5 ) And Cement In Proportion Of 4:2:1Including Supply Of All Materials, Labour, Side Shuttering Ifrequired And T&P Etc. Required For Proper Completion Of Work. 5 S / F Welded Wire Mesh Size 75X25mm And Rectangularmade Out Of 10 Swg Over M.S. Angle Frame With M.S. Flat Welded As Required Including Cost Of Drilling Holes, Washer Welding Etc As Required Including Cost Of All Material, Labourand T&P Etc. Required For Proper Completion Of Work . Except Cost Of M.S Angle And Flat. 6 Mild Steel Or Iron Work In Heavy Sizes Such As Trusses Built Upgates, Door Frames, Record, Racks Roof Work Gates Etc. Wrought Torequired Form Including Holes Rivetting Or Welding Where Necessary And Also Fixing In Proper Position And Alignment Including Cost Of All Materials Supplied By Contractor. 7 Ist Class Brick ( Class 150 ) Work In 1:6 Cement & Coarse Sand ( Fm1.8 To 2.50 ) Mortar But In Supper Structure But For Wall Of One Brick Thick Including Supply Of All Materials, Labour T&P Etc Required For Proper Completion Of Work. 8 Half Brick Thick ( 115Mm ) Wall With 1St Class Brick ( Class 150 ) In Cement Mortar 1:4 Cement & Coarse Sand In Super Structure I / C Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work 9 Providing And Fixing Steel Glazed Window And Ventilators Ofstandard Rolled Mann Or Mahavir Steel Sections Conforming To Is7452-1974 As Per Drawing Joints Metered & Welded With 100X14x3.15 Mm Holdfast Embedded In Cement Concrete Block 15X10x10 Cm. Size Of 1:3:6 Proportion I.E. First Part Of Cement 3 Part Of Approved Coarse Sand & 6 Part Of Graded Stone ( Aggregated 20Mm. Nominal Size ) S / F Of Glass Panes Of Plain Pin Headed 4Mm. Thick Nuts Glazing Clips And Special Putty Of Approved Make Complete And Including A Cost Of Red Oxide Paint. The Fabrication Should Conform To I.S.1038-1975. ( Aluminum Beading With Rubber Packing Included ) . 10 Providing & Fixing 1 Mm.Thick M.S. Sheet Garrage Door With Frameof 40X40x6mm Angle Iron, Diagonal Bracings With 50X5 Mm Flat And 5 Mm Thick M.S. Gusset Plates At Thejunctions And Corners Including Supply And Fixing Of Necessaryfitting, 2 No Lock Rail Of 16 Mm Dia, 375 Mm Long And Including Pintel Hooks At The Top And Bottom, Applying A Priming Coat Of Red Oxide Paint On All Sides Complete . 11 Supply And Fixing Of 32 Mm Thick Commercial Quality Sitapur Plywood Flush Door Shutters Including Fixing Of Wooden Cleats And Stoppers And Including Fixing And Adjustment Of Oxidized Hinges, Bolts, Locks, Handles, Springs And / Or Other Fitting And Including Their Supply Andincluding Painting With Two Coats Of Black Japan On All Iron Fittings If Necessary. 12 Supply And Fixing Of 32 Mm. Thick Shisham Wood Part Panelled Andpart Glazed Door And Window Shutter Including Supply And Fixing Ofwooden Cleats And Stoppers And Including Fixing And Adjustment Ofhinges Bolts, Locks, Handles, Springs And / Or Other Fittings But Excluding Their Supply And Including Fixing The Glass Panes With Putty And Necessary Screws 13 Fixing Of Departmental Doors & Windows Shutters Including Supply& Fixing Of Hinges And Other Fixtures. ( Excluding Their Supply ) Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. 14 Supply And Fixing Anodized Aluminium Door Fittings Like 2 No 150 Mm Handles, 2 No 250 Mm Tower Bolt, 1 No Stopper And 1 No 12 Mm Belan Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. 15 Supply And Fixing Anodized Aluminium Window Fittings Like 2 No 100 Mm Handles, 2 No 150 Mm Tower Bolt, 1 No Stopper Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 8.62 ) 16 Providing And Fixingacp In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Acpof 4.0 Mm Thickness ( Csi No. 28.31 ) 17 Providing And Fixingof Super Heavy Pvc Wallpanel Of Thickness 8Mm With Glossy Finishedsurface Or Texture Approved By Engineer-In-Charge For Interior Decoration Of Wall With Proper Alignment And Level Including All The Fittings , Materials, Labour And T&P Etc. Withcomplete In All Respect Etc. 18 Providing And Fixing False Ceiling At All Heights With Integral Densifiedr Armstrong False Ceiling Tiles Of Size 595X595 X12 Mm Of Approved Texture, Design And Patterns Having Nrc ( Noise Reduction Coefficient ) Of 0.50 ( Minimum ) As Per Is 8225:1987, Light Reflectance Of 85% ( Minimum ) . Non Combustible As Per Bs:476 ( Part-4 ) , Fire Performance As Perbs:476 ( Part 6 &7 ) , Humidity Resistance Of 100%, Thermal Conductivity < 0.043 W / M K As Per Astm 518:1991, In True Horizontal Level Suspended On Interlocking Metal Powder Coated T-Grid Of Hot Dipped Galvanised Iron Section Of 0.40 Mm Thick On Silhouette Profile, Rotary Stiched Double Webbed White With 6 Sub Head : 26- New Technologies And Materials 1632 Mm Reveal Profilewhite / Black ) , Comprising Of Main-T Runners Of Size 15X42 Mm Of Length 3000 Mm, Cross - T Of Size 15X42 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 15X42 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items ( Galvanizing @ 80 Grams Per Sqm ) I.E. 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 22X19x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In- Charge. 26.23.1 With 12 Mm Thick Armstrong Miniralfobre Sound Absorbing Sheet 19 4.0 Cm Thick 1:2:4 Plain Cement Concrete Floor With Cement, Approved Coarse Sand & 2Cm Graded Approved Stone Ballast Laid In Panels Finished With 3Mm Floating Coat Of Neat Cement Or Cement And Marble Dust In Ratio Of 5:1 As Specified And Removing Any Overlapping Mortar At The Joints Of The Panels If Any And Giving Them A Uniform Finish Including Supply Of All Materials, Labour And T&P Etc, Required For Proper Completion Of The Work. Without Base Cc 20 Supply And Fixing Galvanised Mosquito Proof Jali ( 16X24 Gauge ) Withm.S. Flat Of 20 X 3 Mm. Size, On Both Sides Screwed Or Welded To Windowor Door Frame. 21 Renewing Panes Of 4.0Mm Glass Including Supply Of Glass With Putty And Brads Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. 22 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Six Part Of Coarse Sand ( 1:6 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. 23 12 Mm Thick Cement Plaster 1:6 With Cement Mortar On Rough Surface Of Brick Walls Consisting Of 1 Part Cement 6 Part Approved Coarse Sand Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.. 24 6 Mm. Thick Plaster With 1:3 Cement & Coarse Sand Includinglabour, Materials & T&P Etc. Required For Proper Completion Ofthe Work. 25 3 Mm Thick Floating Coat Of Neat Cement Finish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Cement Consumtion 0.044 Bag / Sq.M. ) 26 Repair To Plaster Or Pointing In Patches Including Removal Of Old Plaster Racking Out Joints To 1 Cm. ( 3 / 8 ) Depth, Watering The Area And Then Replastering Or Reappointing With The Same Mortar Or Proportion Of Mortar As The Existing Surface Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work . 27 Providing And Applying Fibre Reinforced Elastomeric Liquid Water Proofing Membrane With Resilient Acrylicpolymers ( Asian, Cico, Durable Or Quivalent Brand As Approved By E / I ) Having Sun Reflectivity Index ( Sri ) Of 105 On Top Of Concrete Roof In Three Coats @10.76 Litre / 10 Sqm , One Coat Of Self-Priming Of Elastomeric Waterproofing Liquid ( Dilution With Water In The Ratio Of 3:1 ) And Two Coats Of Undiluted Elastomeric Waterproofing Liquid ( Dry Film Thickness Of Complete Application / System Not Less Than 500 Microns ) . The Operation Shall Be Carried Out After Scrapping And Properly Cleaning The Surface To Remove Loose Particles With Wire Brushes, Complete In All Respect As Per The Directions Of Engineer-In-Charge With 7 Years Warranty 28 Applying Birla Or Equivalent Putty On New Interior Or Exterior Surface Over One Coat Of Water Based Cement Primer Of Ici Or Equivalent Brand For Smoothening And Levelling Of The Surface As Per Requirement And Direction Of Engineer I / C Including Cost Of All Material, Labour, T & P Etc Required For Proper Completion Of Work. 29 Applying Birla Or Equivalent Putty On Previousaly Bila Putty Smoothen Surface Over One Cost Of Water Base Cement Primer Of Ici Or Equivalent Brand For Smoothining And Leveling Of The Surface As Per Requirement And Direction Of E / I Including Cost Of All Material , Labour And T&Prequired For Proper Completion Of Work. 30 Painting Or Varnishing New Iron Work In Small Areas Or New Woodwork With One Coat Of Ready Mixed Priming Paint And Two Coat Ofapproved Superior Quality Ready Mix Paint Luxol Or Equivalentbrand Or Varnish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Paint To Be Used Should Conform To The I.S. 103-1950. 31 Painting Or Varnishingfor Two Coat On Previously Painted Old Wood Or Iron Work Including Its Sand Papering, Rubbing And Cleaning As Required, For Proper Completion Of Work. 32 Painting Two Coat With Acrylic Emulsion Paint On New Surface Of Berger / Asian / Ici Or Equivalent Paint ( Paint And Water In The Ratio 1:1 By Volume ) Over Prepared And Primed Surface Of Cement Concrete, Cement Plaster And Bricks Including All Labour, Material And T&P Etc Required For Proper Completion Of The Work, ( Preparation Of Base With Birla Putty Etc. And A Coating Of Primer Shall Be Paid Extra ) . 33 Paintingtwo Coat With Acrylic Emulsion Paint On On Previousaly Treatedsurface Of Berger / Asian / Ici Or Equivalent Paint ( Paint And Water In The Ratio 1:1 By Volume ) Of Cement Concrete, Cement Plaster And Bricks Including All Labour, Material And T&P Etc Required For Proper Completion Of The Work, ( Preparation Of Base With Birla Putty Etc. And A Coating Of Primer Shall Be Paid Extra ) . 34 Painting Two Coat With Apex Or Equivalent Brand Weather Coat Paint On New Wall Surfaces ( Well Prepared With Birla Putty And One Coat Of Primer Ici Or Equivalent Which Shall Be Paid Separately ) Including Thorough Washing With Water Including Cost Of All Materials, Labour, T&P Required For Proper Completion Of Work. 35 Painting Two Coat With Apex Or Equivalent Brand Weather Coat Paint Onpreviousaly Treatedsurfaces ( Well Prepared With Birla Putty And One Coat Of Primer Ici Or Equivalent Which Shall Be Paid Separately ) Including Thorough Washing With Water Including Cost Of All Materials, Labour, T&P Required For Proper Completion Of Work. ( 36 Supply And Laying 6 Mm Thickglazed Tiles Of Size 300X450 Mm In Skirting / Dado Laid With1:3 Cement And Approved Coarse Sand Mortar Finished With Whitecement Slurry, Jointing And Polishing Complete, Including Supplyof All Materials, Labour And T&P Etc. Completion Required For Proper Completion Of The Work. 37 Supply And Laying 8 Mm Thickglazed Floor Tiles Of Somany, Johnson Or Equivalent Make, Of Size 300X300 Mm, Laid With1:3 Cement And Approved Coarse Sand Mortar Finished With Whitecement Slurry, Jointing And Polishing Complete, Including Supplyof All Materials, Labour And T&P Etc. Completion Required For Proper Completion Of The Work. 38 Providing And Laying Floor Of 8 Mm Thick Vitrified Tiles In Flooring Or Skirting Of Approved Brand ( Bell, Johnson Or Equi. Make ) Size Of 600X600 Mm Of Approved Shade, Colour And Pattern , Laid Over Base Cement Mortar 1:4 Mix Including Finishing The Joints With White Cement Mixed With Pigment To Match The Shade Of Tile Including Cost Of All Material, Labour And T&P Required For Proper Completion Of The Work. 39 Providing And Fixing Of 110 Mm Dia Pvc Pipe 4 Kg / Sq.Cm Forwith Special Such As Tee, Bend, Socket, Elbow Etc Including Supply Of All Labour, Material, T & P Etc Complete Required For Proper Completion Of Work. 40 Providing And Fixing Pvc Ball Float Valve 15 Mm Dia. With Brass & Union Complete, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. 41 P / F Wash Hand Basin ( 26X41 C.M. ) Of White Glazed Earthen Ware Of Hindustan / Perry Or Equivalent Make Complete 42 S / F Of Pvc Low Level Cistern Hindustan, Or Equivalent Make 10 Liter Capacity Complete With All Accessories Including Cost Of All Materials, Labour T&Petc. Complete 43 Providing And Fixing First Quality White Glazed Orissa Pattern W.C.Pan Hindustan, Cera Make. Size 580 Mm. ( Hindustan, Cera Make ) With Out P Trapincluding Supply Of All Materials, Labour And T&P Etc.Complete. 44 Providing And Fixing First Quality White Glazed European Type. W.C.Pan Hindustan, Cera Make. Size 580 Mm. ( Hindustan, Cera Make ) With Out P Trapincluding Supply Of All Materials, Labour And T&P Etc.Complete. 45 Providing And Fixing Plastic Seat Covercomplete With Plastic Lid For European Type Wc Isi Markedincluding Supply Of All Materials, Labour And T&P Etc.Complete. ( Csi No. 27.04 ) 46 Providing And Fixing Of 15 Mm Dia B-Class Jindal, Jtc Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross Clamps Etc. Earth Work Including The Trenches Etc. Required For Proper Completion Of The Work The Rate Also Includes Concealed G.I. Fitting Where Required Cutting & Making Good The Wall Etc. And All Materials Labour And T&P Complete 47 As In Item No. 46 Above But. 20 Mm Dia 48 As In Item No. 46 Above But. 25 Mm Dia 49 Providing And Fixing Full Way G.M. Gate Valve 15 Mm Dia With Wheel, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. 50 Same As Above Item No.44Above But For 20Mm Dia 51 S / F Of Syntex Or Equivalent Make Water Storage Tank Including All Material, Labour And T&P Etc. Required For Proper Completion Of The Work. 52 Supply And Fixing Brass Bib Cock Of Heavy Quality 15 Mm No. Dia ( 400 Gm ) Isi Marked Including Supply Of All Materials Labour T&P Etc. Complete 53 Supply Of Carpenter 54 Supply Of Plumber 55 Supply And Fixing Of 3 Blade Ceiling Fan 1200 Mm Of Havells Or Equivalent Including All Material, T&P Etc Required For Proper Completion Of Work As Approved By Engineer In Charge. 56 Supply And Fixing Of 5 Blade Exhaust Fan Ventile Air Dx 225 Mm Of Havellsor Equivalent Make Including All Material, T&P Etc Required For Proper Completion Of Work As Approved By Engineer In Charge. ( Csi No. 28.38 ) 57 Wiring Point For Light With 1.5 Sq. Mm. Fr Pvc Insulated Multistrand Single Core Copper Conductor Cable In P.V.C.Conduit Pipe Concealed In The Wall, Complete With 14 Swg Copper Earth Continuity Wire, Piano Type Switch & Ceiling Rose / Angle / Button Holder On 3Mm Thick Phenolic Laminated Backelite-Sheet Etc. Complete In All Respects, As Directed Including Matching Colour Wash. 58 Wiring Point For Fan / Fresh Air Fan ( Light Duty Exhaust Fan ) In Pvc Conduit With 1.5 Sq. Mm. Fr Pvc Insulated Multistrand Copper Conductor Cable As Earth Wire Drawn Inside The Conduit. 59 Wiring Point For Plug With 1.5 Sq. Mm. Fr. Pvc Insulated Multistrand Single Core Core Copper Conductor Cable In P.V.C. Conduit Concealed In The Wall, Complete With 14 Swg Copper Earth Continuity Wire, Piano Type Switch And Socket Etc. Complete In All Respects Including Matching Colour Wash. 60 Wiring Point For Exhaust Fan / Power Plug In Pvc Conduit With 1.5 Sq. Mm. Fr Insulatedmultistrand Copper Conductor Cable As Earthwire Drawn Inside The Conduit. 61 S / F Batten / Angle Holder Of Approved Quality Complete In All Respect . 62 Supply And Installationof Led Tube Light Crompton, Bajaj & Equivalent Made With Fitting Of Box / Channel Type T-5 Energy Saver Without Reflector & Without End Cover For One Number 20 Wattt-5 Lamp / Tube With 1X20 Watt T-5 Lamp Tube Complete All Respect 63 Supply And Wiring Of Submain With Two Number 1.5Sq.Mm. Frlsh Pvc Insulated 1100 V Grademultistrand Single Core Copper Conductor Cable N 20 Mm Dia Heavy Duty ( 2Mm Thick ) Pvc Conduit With 1 Nos. 1.5 Sq. Mm.Frlsh Pvc Insulated 1100 V Grade Multistrand Singlecore Copper Conductor Cable As Earth Continuity Wiredrawn Inside The Conduit Complete In All Respect. 64 Supply And Wiring Of Submain With Two Number 2.5Sq.Mm. Frlsh Pvc Insulated 1100 V Grademultistrand Single Core Copper Conductor Cable N 20 Mm Dia Heavy Duty ( 2Mm Thick ) Pvc Conduit With 1 Nos. 1.5 Sq. Mm.Frlsh Pvc Insulated 1100 V Grade Multistrand Singlecore Copper Conductor Cable As Earth Continuity Wiredrawn Inside The Conduit Complete In All Respect. 65 Supply And Wiring Of Submain With Two Number 4 Sq.Mm. Frlsh Pvc Insulated 1100 V Grade Multistrand Single Core Copper Conductor Cable 20Mm Dia Heavy Duty ( 2Mm Thick ) Pvc Conduit With One Number 2.5 Sq. Mm. Multistrand Copper Conductor Cable As Earth Continuity Wire Drawn In Conduit 66 Supply And Fixing Of 8Watt. Led Bulb 67 Supply And Fixing Of 6 Amp. To 32 Amp. Mcb ( 10 Ka ) C Curve. 68 S / F Of 63 Amp. T.P. Isolator 69 S / F Of 63 Amp. S.P. Isolator

INR 3540 /-

INR 11000.0 /-

INR 5.51 Lakhs /-

Name of Work: For maintenance & repairing work at Zonal Accounts Office, Bareilly

Sl. No.	Item Description
1	Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M.
2	Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M.
3	Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres.
4	Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work.
5	S/F welded wire mesh size 75x25mm and rectangularmade out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labourand T&P etc. required for proper completion of work . except cost of M.S angle and flat.
6	Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.
7	Ist Class brick (class 150) work in 1:6 cement & coarse sand (FM1.8 to 2.50) mortar but in supper structure but for wall of one brick thick including supply of all materials, labour T&P etc required for proper completion of work.
8	Half brick thick (115mm) wall with 1st class brick (class 150) in cement mortar 1:4 cement & coarse sand in super structure I/C supply of all materials, labour and T&P etc. required for proper completion of work
9	Providing and fixing steel glazed window and ventilators ofstandard rolled Mann or Mahavir steel sections conforming to IS7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion I.E. First part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included).
10	Providing & fixing 1 mm.thick M.S. sheet garrage door with frameof 40x40x6mm angle iron,diagonal bracings with 50x5 mm flat and 5 mm thick M.S. gusset plates at thejunctions and corners including supply and fixing of necessaryfitting, 2 no lock rail of 16 mm dia,375 mm long and including pintel hooks at the top and bottom, applying a priming coat of red oxide paint on all sides complete .
11	Supply and fixing of 32 mm thick commercial quality Sitapur plywood flush door shutters including fixing of wooden cleats and stoppers and including fixing and adjustment of oxidized hinges, bolts, locks, handles, springs and/or other fitting and including their supply andincluding painting with two coats of black Japan on all iron fittings if necessary.
12	Supply and fixing of 32 mm. thick Shisham wood part panelled andpart glazed door and window shutter including supply and fixing ofwooden cleats and stoppers and including fixing and adjustment ofhinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws
13	Fixing of Departmental doors & windows shutters including supply& fixing of hinges and other fixtures.(excluding their supply) including all materials,labour & T&P etc. required for proper completion of work.
14	Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials,labour & T&P etc. required for proper completion of work.
15	Supply and fixing Anodized Aluminium Window fittings like 2 no 100 mm handles,2 no 150 mm tower bolt, 1 no stopper including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.62)
16	Providing and fixingACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACPof 4.0 mm thickness (CSI No. 28.31)
17	Providing and fixingof super heavy PVC wallpanel of thickness 8mm with glossy finishedsurface or texture approved by Engineer-in-charge for interior decoration of wall with proper alignment and level including all the fittings , materials,labour and T&P etc. withcomplete in all respect etc.
18	Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profilewhite/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong MiniralFobre Sound Absorbing Sheet
19	4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC
20	Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame.
21	Renewing panes of 4.0mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.
22	12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.
23	12 mm thick cement plaster 1:6 with cement mortar on rough surface of brick walls consisting of 1 part cement 6 part approved coarse sand including supply of all materials, labour and T&P etc. required for proper completion of the work..
24	6 mm. thick plaster with 1:3 cement & coarse sand includinglabour, materials & T&P etc. required for proper completion ofthe work.
25	3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumtion 0.044 bag/Sq.m.)
26	Repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm.(3/8") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work .
27	Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylicpolymers(Asian,cico,durable or quivalent Brand as approved by E/I) having sun reflectivity index(SRI)of 105 on top of concrete roof in three coats @10.76 litre/10 sqm , one coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1)and two coats of undiluted elastomeric waterproofing liquid(dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes,complete in all respect as per the directions of Engineer-in-charge with 7 years warranty
28	Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.
29	Applying Birla or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.
30	Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and two coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.
31	Painting or varnishingfor two coat on previously painted old wood or iron work including its sand papering,rubbing and cleaning as required, for proper completion of work.
32	Painting Two coat with Acrylic emulsion paint on New surface of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) .
33	PaintingTwo coat with Acrylic emulsion paint on on previousaly treatedsurface of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) .
34	Painting Two coat with APEX or equivalent brand weather coat paint on New wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work.
35	Painting Two coat with APEX or equivalent brand weather coat paint onpreviousaly treatedsurfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work. (
36	Supply and Laying 6 mm thickglazed tiles of size 300x450 mm in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.
37	Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.
38	Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.
39	Providing and fixing of 110 mm dia PVC pipe 4 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work.
40	Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.
41	P/F wash hand basin (26x41 c.m.) of white glazed earthen ware of Hindustan/Perry or equivalent make complete
42	S/F of PVC low level cistern hindustan,or equivalent make 10 liter capacity complete with all accessories including cost of All materials, labour T&Petc. Complete
43	Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete.
44	Providing and fixing first quality white glazed European type. W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete.
45	Providing and fixing PLASTIC SEAT COVERCOMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKEDincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.04)
46	Providing and fixing of 15 mm dia B-class Jindal, JTC ISI marked G.I. pipes complete with special such as bend, tee, socket, cross clamps etc. earth work including the trenches etc. required for proper completion of the work the rate also includes concealed G.I. fitting where required cutting & making good the wall etc. and all materials labour and T&P complete
47	As in item No. 46 above but. 20 mm dia
48	As in item No. 46 above but. 25 mm dia
49	Providing and fixing full way G.M. gate valve 15 mm dia with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.
50	Same as above item no.44above but for 20mm dia
51	S/F of Syntex or equivalent make water storage Tank including all material, labour and T&P etc. required for proper completion of the work.
52	Supply and fixing brass bib cock of heavy quality 15 mm No. dia (400 gm) ISI marked including supply of all materials labour T&P etc. complete
53	Supply of Carpenter
54	Supply of Plumber
55	Supply and Fixing of 3 blade ceiling fan 1200 mm of Havells or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge.
56	Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havellsor equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.(CSI No. 28.38)
57	Wiring point for light with 1.5 sq. mm. FR PVC insulated multistrand single core copper conductor cable in P.V.C.conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/angle/button holder on 3mm thick phenolic laminated backelite-sheet etc. complete in all respects, as directed including matching colour wash.
58	Wiring point for fan/fresh air fan (light duty exhaust fan) in PVC conduit with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit.
59	Wiring point for plug with 1.5 sq. mm. FR. PVC insulated multistrand single core core copper conductor cable in P.V.C. conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch and socket etc. complete in all respects including matching colour wash.
60	Wiring point for exhaust fan/ power plug in PVC conduit with 1.5 sq. mm. FR insulatedmultistrand copper conductor cable as earthwire drawn inside the conduit.
61	S/F Batten/Angle Holder of approved quality complete in all respect .
62	Supply and installationof LED Tube light Crompton, Bajaj & equivalent made with fitting of box / channel type T-5 energy saver without reflector & without end cover for one number 20 wattT-5 Lamp/Tube with 1x20 watt T-5 Lamp Tube complete all respect
63	Supply and wiring of submain with two number 1.5sq.mm. FRLSH PVC insulated 1100 V grademultistrand single core copper conductor cable n 20 mm dia heavy duty(2mm thick) PVC conduit with 1 nos. 1.5 sq. mm.FRLSH PVC insulated 1100 V grade multistrand singlecore copper conductor cable as earth continuity wiredrawn inside the conduit complete in all respect.
64	Supply and wiring of submain with two number 2.5sq.mm. FRLSH PVC insulated 1100 V grademultistrand single core copper conductor cable n 20 mm dia heavy duty(2mm thick) PVC conduit with 1 nos. 1.5 sq. mm.FRLSH PVC insulated 1100 V grade multistrand singlecore copper conductor cable as earth continuity wiredrawn inside the conduit complete in all respect.
65	Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable 20mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit
66	Supply and fixing of 8Watt. LED bulb
67	Supply and fixing of 6 Amp. To 32 amp. MCB (10 KA) C Curve.
68	S/F of 63 Amp. T.P. Isolator
69	S/F of 63 Amp. S.P. Isolator