Tender For Improvement Of Water Supply By Replacement Of E&M Equipment For Various Tube Wells In Ac-24 Re-Invited, Delhi-Delhi

Improvement Of Water Supply By Replacement Of E&M Equipment For Various Tube Wells In Ac-24 Re-Invited-Supplyof Automation Lt Panel Board Suitable For 415 V, 3 Phase, 50 Hz, 4 Wire System For Operation Of Up To 15 Hp Submersible Set, Made Out Of Not Less Than 2 Mm Thick Crca For Load Bearing Members And 1.6 , , For Doors Of Panel, Totally Enclosed, Dust And Vermin Proof, Floor Mounted Type. The Panel Size 760 Mmx1360 Mmx300 Mm And Having ( 1 ) 63 Amp Changeover -1 No ( 2 ) 63 A Tpn Mcb -1No ( 3 ) Amp.Meter 0-50 A -1 No ( 4 ) Voltmeter 1 No ( 5 ) Amp. & Volt Meter Selector Switches 1 Set ( 6 ) Auto Manual + Light+Control Mcb Tp 32 Amp-1 No.Each ( 7 ) Ct--3 Nos ( 8 ) Push Button +On / Off Light-2 Nos Each ( 9 ) 5 Kvar Shunt Capacitor-1 No ( 10 ) Aluminium Bus Bar Size 25 Mmx6mm- 1Set ( 11 ) 15 Hp Star Delta Starter ( A ) 32 Amp Power Contactor-3 Nos ( B ) Overload Relay 14-23 A-1 No ( C ) Star Delta Timer -1 No ( D ) Qt Timer -24 Hours -1 No ( E ) Motor Protection Relay Flush Mounting With Display With Thermal O / L, Short Circuit, Earth Fault, Phase Loss, Unbalance, Phase Reversal, Locked Rotor Protection Make :- L&T / Protech-1 No Make Of Accessories / Components As Per Djb Approved Make Of Panels:- L&T / C&S / Bch / Protech / Djb Approved 2 Supply-Of G.I. Pipe 50Mm Dia, Medium-Class, Each Of 3M±3Long, Duly Threaded On Both-Ends, Welded & Fitted With G.I. / M.S. Flange Ofthickness 6 Mm On Both Ends With A Slot For Submersible-Cable. Welding Of M.S Strips At Both Ends On Flange.Make Of Pipe: Jindal / Tata.Hsn Code:- 7308 3 Supply Of Three Core Flat Cable With Bare Bunched Copper Conductor Insulated & Sheathed With Pvc For Submersible Pump Motor With Voltage Grade Upto 1100V Of 6.0 Sq Mm. Size In 100Mtr. Roll.Make: Finolex / Havellshsn Code:-8544 4 Supply-Of Tail-Piece Of Medium-Class G.I.-Pipe 500 Mm Long With One-End Threaded, As Per Out-Let Of Pump And Another-End Flanged, As Per Size Of G.I. Pipe 50 Mm Dia.Make Of Pipe:Jindal / Tata.Hsn Code:- 7307 5 Supply-Of G.I. Bend 90O X 50 Mm Dia, Having Flange At Both-Ends.Hsn Code:- 7307 6 Supply-Of Nut-Bolts, ½” Dia Of Different Size I.E. 1.5” & 2.5” Long, Threaded Of Good Quality.Hsn Code:-7318 7 Supply-Of Rubber-Packing For 50Mm Dia Flange.Hsn Code:-4008 8 Supply-Of Orifice-Assembly 50Mm Dia, 0.6 Meter Long, Double-Flange. Hsn Code:- 7307 9 Supply-Of Bore-Cover Plate Of Size: 200 Mm Dia, Made Out From 6 Mm Thick M.S.-Sheet In 2-Halves And A Circular-Hole Of 50 Mm Dia In Center With Lockingarrangement By Nuts & Bolts. Hsn Code:- 7307 10 Lifting & Lowering Of Submersible Pumpsets Along With All Allied Electrical And Mechanical Accessories From The Tube-Wells Including Dismantling Of Column Pipes By Opening / Cutting Of Nut & Bolts, Opening & Re-Jointing Of Cables, Testing & Commissioning Of T / Wells As Per Site Requirement Up To Depth Of Bore Approx To 350 Ft, Job Include The Hiring Of T&P Like Chain Pulley Block, Tripod Stand, Tool & Tackle, Hiring Of Tata-407 Or Equivalent Suitable Vehicle For Local Shifting Of Material From Store To Site Or Vice-Versa Etc. As Per Site Requirement To Complete The Job.

INR 500 /-

INR 19600.0 /-

Refer document