Tender For Maintenance Of Residential Quarter Of Se Complex Pwd Complex And Deo Complex During The Year 2022 23 Sh Mtc Of Type I Type Ii Type Iii And Type Iv Quarter Grii
Tender Value
11.69 Lakhs
Estimated cost
Bid Submission
23 Nov 2022
0 days left
EMD
23385
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumarghat → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Residential Quarter Of Se Complex Pwd Complex And Deo Complex During The Year 2022 23 Sh Mtc Of Type I Type Ii Type Iii And Type Iv Quarter Grii
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:a) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 5 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate ) flooring finished with a floating coat of neat cement including cement slurry , rounding of edges and strips etc. complete.40 mm thick with 20 mm stone aggregate |
| 6 | Providing and laying in positionspecified grade of reinforced cement concreteexcluding the cost of centring, shuttering, finishing, and reinforcement.-All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | First class brick work in foundation and plinth including cost of all materials as required complete:-a) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 8 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-a) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :a) Karai wood |
| 10 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.A) Local teak wooda) 35 mm thick shutters |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 12 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutter for doors windows and clerestory windows (Area of opening for panel inserts ex/c portion inside grooves or rebates to measur). Panelling or penaled of panelled and glazed shutter 25 to 40 mm thickA) Local teak wood 16mm thick |
| 13 | Providing and fixing 1st quality ceramic glazed wall tiles( minimum 200 x 300) conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shadesof any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 14 | Providing and layingceramic glazed floor tilesin different sizes( thickness to be specified by the manufacturer ) of 1st qualityconforming to IS : 15622of approved make in colours such as white, ivory, grey, fume red, brown laid over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointing with grey cement slurry@ 3.3 Kg/sqm including pointing the joints with white cement and matching pigment etc complete.Mat Finish TilesCeramic Tiles 1st quality 300 X 300 mm in all shades and designs |
| 15 | Providing and layingvitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % and conforming to IS : 15622-2017 of approved make, in all colours and shades,laidover 20 mm thickcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with grey cement slurry @ 3.3 Kg/sqm including grouting the jointswith white cement and matching pigments etc complete.Soluble Salt Stainfree vitrified tiles |
| 16 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. Complete as per direction of the Engineer-in-charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 17 | Demolishing reinforcedcement concrete manually / by mechanical means including stacking ofsteel bars properly and disposal of unserviceable material with all lifts and upto 50 m lead etc. complete as per direction of the of the Engineer-in-charge. |
| 18 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. |
| 19 | Dismantling old glass panes from wooden/ steel structures including stacking of serviceable materials and disposal of rubbish and unserviceable materials to the dumping ground with all leads and lifts etc. Complete as per direction of the Engineer-in-charge. |
| 20 | Renewing glass panes with putty and nails wherever necessary in/c. racking out the old putty:a) Float glass panes of thickness 4 mm. |
| 21 | 12 mm cement plaster of mixa) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 22 | 15 mm cement plaster on the rough side of sigle or half brick wall of mix :a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 23 | 6 mm cement plaster of mix.a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 24 | Distempering with Ist quality acrylic washable distemper of approved brand and manufacture and of required shade on old work ( one or more coats) to give an even shade as required complete as per direction of the Engineer-in-charge. |
| 25 | Distempering with Ist quality acrylic washable distemper ( ready mixed) having VOC content less than 50 grams/litre of approved brand and manufactureof required shade and colour complete as per manufactures specification( Payment shall be made after submission of test certificate issued by the manufacturer)two or more coats on new work |
| 26 | Finishing walls with water proffing cement paint of required shade of approved brand and manufacturecomplete. (Payment shall be made after submission of Test Certificate issued by the Manufacturer). new work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 27 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.( Payment shall be made after submission of test certificate issued by the manufacturer)two or more coats on new work |
| 28 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : a) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 29 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : a) White Vitreous china Wash basin size 630 x 450 mm a pair of 15 mm C.P. brass pillar taps. |
| 30 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approvedquality and colour.a) 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88 mm,weighing not less than 170 gms |
| 31 | b)600 mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 32 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms |
| 33 | Providing and fixing soil, waste and vent pipes:a) 100 mm diaI) Sand cast iron S&S pipe as per IS: 1729 |
| 34 | Providing and fixing P.V.C. Low level flushing cistern with manually controlled device ( handle lever) conforming to IS:7231, with all fittings and fixtures complete.10 litre- capacity-white |
| 35 | Centering shuttering including struttings, propping etc. and removal of form work for:Foundations, footings, bases for columns etc for mass concrete with timber plank. |
| 36 | Centering shuttering including struttings, propping etc. and removal of form work for: i) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 37 | Centering shuttering including struttings, propping etc. and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 38 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 39 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 40 | Half brick masonary work with first class bricks in foundation and plinth including cost of all materials as required complete :a) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 41 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurryincluding rubbing and cleaning complete as per direction of the Engineer-in-charge. |
| 42 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. A) Fixed to openings /wooden frames with rawl plugs screws etc. |
| 43 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63mm thick with zinc coating not less than 275gm/m |
| 44 | Providing ridges or hips of width 60 cm over all width plain G.S fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. Limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/m2 |
| 45 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacrurer]a) With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 46 | b) with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work. |
| 47 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 48 | Cutting holes upto 30x30 cm in walls including making good the same : i) With 1st class bricks. |
| 49 | Providing and fixing G.I. pipes of medium class as per IS:1239 with latest amendmentcomplete with G.I. fittings and clamps, including cutting and making good the walls etc.complete as per CPWD specification and direction of the Engineer-in-chargeInternal work - Exposed on wall. i) 15 mm dia. nominal bore |
| 50 | ii) 20 mm dia. nominal bore |
| 51 | iii)25 mm dia. nominal bore |
| 52 | iv) 40 mm dia. nominal bore |
| 53 | Providing and fixing brass bib cock of approved quality :i)15 mm dia. nominal bore |
| 54 | Providing and fixing brass stop cock of approved quality : i)15 mm dia. nominal bore |
| 55 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: i) 100 mm diameter |
| 56 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making neccessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 57 | Clearing/Removal of solid waste of septic tank and disposal the same in proper place as per direction the Engineer-in-charge |
| 58 | Providingandfixinginsulatingboardceilingofapproved qualitywithnecessarynailsetc.complete(frameworktobe paid separately):12 mm thick White face insulating board |
| 59 | Grading roof for water proofing treatment completeas required as per direction of the Engineer-in-charge with :Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 60 | Extraforprovidingandmixingwaterproofing material in cement concrete work in doses by weight of cement as per manufacturer\"s specification |
| 61 | Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. |
AI Tender Summary
Tender Timeline
Nov 02, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender