Tender For Construction Of Entrance Gate At 3Rd Km. Of Sathipur Jajpur Mangalpur Kayangola Road In The District Of Jajpur
Tender Value
6.59 Crore
Estimated cost
Bid Submission
15 Nov 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panikoili → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Entrance Gate At 3Rd Km. Of Sathipur Jajpur Mangalpur Kayangola Road In The District Of Jajpur Entrance Gate Work
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS(PART-I) Construction of Double under reamedpile foundation of 375mm dia upto 6.0mlongwith RCC M-25 using crushed broken hard granite chips of 20mm and down graded with required design with cost conveyance taxes cost of all materials and labour etc complete as per specification and direction of Engineer in charge |
| 2 | 6.0m to 12.0m long |
| 3 | Earth work in excavation of foundation inordinaarysoil including dressing and levelling the beds within 50m. initial lead and 1.5m. initial lift with cost, conveyance, taxes as per specification and directionof Engineer in charge |
| 4 | Filling foundation and plinth with good quality river sand with watering and ramming incluing cost, conveyane, cost of all materials and labour etc complete as per direction and specification of Engineer in charge |
| 5 | Diluting and injecting chemical emulsion ( to be supplied free of cost at site of work) for pre-constructional anti-termite treatment and creating a continuous chemical barrier and all round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated surroundings of pipes and conduits etc. complete as per specification and direction of Engineer in charge |
| 6 | Cement concrete (1:4:8) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge |
| 7 | Cement concrete (1:3:6) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge |
| 8 | Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties ofmaterials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge.Ground floor |
| 9 | Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties ofmaterials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge.Ground floor |
| 10 | 1st floor |
| 11 | 2nd floor |
| 12 | 3rd floor |
| 13 | 4th floor |
| 14 | RCC work ofM-25 grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Pile Cap |
| 15 | Grade Beam and Plinth Beam |
| 16 | Roof BeamGF |
| 17 | 1st floor |
| 18 | 2nd floor |
| 19 | 3rd floor |
| 20 | 4th floor |
| 21 | LintelGF |
| 22 | 1st floor |
| 23 | 2nd floor |
| 24 | 3rd floor |
| 25 | 4th floor |
| 26 | Staircase GF |
| 27 | 1st floor |
| 28 | 2nd floor |
| 29 | 3rd floor |
| 30 | Roof SlabGF |
| 31 | 1st floor |
| 32 | 2nd floor |
| 33 | 3rd floor |
| 34 | 4th floor |
| 35 | RCC work ofM-30 grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Column above plinth levelGF |
| 36 | 1st floor |
| 37 | 2nd floor |
| 38 | 3rd floor |
| 39 | 4th floor |
| 40 | Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL includingbending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor |
| 41 | 1st floor |
| 42 | 2nd floor |
| 43 | 3rd floor |
| 44 | 4th floor |
| 45 | EI Work -Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm |
| 46 | 25mm |
| 47 | Supplying and fixing metal box of following sizes (nominal size on surface or in recess with suitable size of phenomic laminated sheet cover infront including painting etc as required.75mm x 75mm x 60mm deep |
| 48 | 100mm x 100mm x 60mm deep |
| 49 | 20mm Junction Box one way |
| 50 | 20mm Junction Box Two way |
| 51 | 20mm PVC Bend |
| 52 | 25mm PVC Bend |
AI Tender Summary
Tender Timeline
Nov 02, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 16, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender