Military Engineer Services-MES has published Tender For Repairs/Replacement Of Wornout Spares Of Generator/ Comprehensive Lifts, Fire Fighting Equipments Motors/ Jockey Pumps, Maintenance Of Lifts And Other Connected Allied Repair Works At Drdo Township, Nai, Chess Kanchanbagh, Hyderabad. Submission Date for this Tender is 21-11-2022. Passenger Lift Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 14-Nov-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-11-2022 |
Sl. No. | Item Description |
1 | Comprehensive maintenance including renewal/replacement of defective parts of electric Lift (13 Passenger lift) electricically operated with selective/collective control catering to six floors including ground floor installed at building No.E-29, E-30,E-31, E-32, E-33 & E-34 atDRDO Township, Kanchanbagh complete all as directed. Make of lift : OMEGA |
2 | Comprehensive maintenance of lifts like checking of ropes, door movements, limit switch, alignment of ropes and lift, lubrication, break panel, cable checking, normal and routine maintenance, repairs and replacement of spares of lifts of following capacities and makes complete all as directed. |
3 | 1.5 Ton capacity in analytical building at DMRL Make: OTIS |
4 | 2.0Ton capacity in Ganga building at DLRL Make:UT Limited |
5 | 1.0 Ton capacity in krishna building at DLRL Make:UT limited |
6 | 1.0 Ton capacity in main bldg director lift at DMRL Make:UT limited |
7 | 2.0 Ton capacity in Kavari bldglift at DLRL Make:Kone Elevators |
8 | 1.0 Ton capacity in Godawari bldglift at DLRL Make:Kone Elevator |
9 | 1.5 Ton capacity in Main bldglift at DMRL Make:Kone Elevator |
10 | 1.0 Ton capacity in New Admin bldg lift at DMRL Make:Johnson Lifts Pvt Ltd. |
11 | NOTE for item 1 to 2.08 :- (i) Comprehensive maintenance includes all minor, major and consumeble repairs and replacement of spares/parts etc (comphrensive maintenance does not include repair/ replacement of car door/car cabin)ARD,Mother Board, Driver. (ii) lift inspection to be carried out by govt approved lift inspector once in 06 months & documentary proofshall be submitted. to Eng-in-Charge (iii) Comprehensive maintenance shall be carried out by OEM i.e., M/s Omega Elevators, M/s OTIS Elevators and M/s UT Limited M/s Johnson Lifts Pvt Ltd. and MOU the same shall be submitted to the accepting officer within 10 days of placing of Work Order. |
12 | Testing and Refilling of Dry Chemical Powder type Fire Extinguisher 5 Kg. Capacity powder and CO2 gas catridge of 120 gms. Capacity confirming to IS: 2171. |
13 | Testing and Refilling of Carbon – Di – Oxide type Fire Extinguisher 4. 5 Kg. Capacity CO2 gas confirming to IS: 2878 |
14 | Taking down old unserviceable hydrant valve and Supply, Installation, Testing and Commissioning of Single Headed Hydrant valve confirming to IS 5290 with ISI mark of size 63 mm dia oblique type with instantaneous hose coupling adaptor etc. with all neceesary fittng materials complete required. |
15 | Taking down old unserviceable hydrant hose pipe and Supply, Installation, Testing and Commissioningof Hydrant hose pipe, 63 mm dia and 2x15 mtrs long RRL type with Gunmetal 63 mm size male coupling at one end andfemale coupling at the other end.It should with stand a burtsting pressure of 450 psi, rot proofed, with ISI mark. Hose shall comply to IS 636 |
16 | Taking down old unserviceable branch pipe and Supply, Installation, Testing and Commissioningof short Branch pipe with 63 mm female instanteneous inlet made of gun metal, male threaded outlet, complete with hexagonal basednozzle heavy quality confirming to IS 903 etc. as approved and as directed. |
17 | Taking down old unserviceable hose reel pipe and Supply, Installation, Testing and Commissioning of Fire Hose Reel pipe 20 mm dia. X 30 mtr. Long, high pressure with 5 mm out let GM nozzle with shut off valve(IS: 884 - 1969) includes stop cock and chromium plated nozzle with all neceesary fixing materials complete all as directed. |
18 | Replacement of Fire hydrant stand post both ends flanged 1 Mtr long with one end bent to 90 degrees suitable for long single fire hydrant valves including duck foot bend double end flanged and sluice valve all as specfied and directed. |
19 | M&L for Scrapping of old existing paint of pipe lines for Fire fighting system of any sizes and applying two coats of synthetic enemel paint to match with the existing shade complete all as directed. Note - Rate quoted shall be deemed to include cost of Paint & tools. Make - ASIAN / SHALIMAR / NEROLAC |
20 | Scrapping of old existing paint of Fire cabinet (inside & outside) for Fire fighting system of any sizes and applying two coats of Red postal colour synthetic enemel paint. Note -Rate quoted shall be deemed to be include rates of Paint & tools. Make- ASIAN / SHALIMAR / NEROLAC |
21 | M&L for rewinding of the electric motor of 60 HP capacity duly disconnecting and taking down electric motor from the existing position and inspecting the same, transporting to workshop for repairs and bringing back. Cutting and removing the burnt out winding conductors rewinding the same with same gauge and weight of insulated super enamelled copper conductor and providing cotton insulated sleeves, varnishing, drying, refixing in position checking the alignment along with pump set connecting up with the electrical system, testing and commissioning complete all as directed. |
22 | Repair and servicing of 7.5 to 12.5 HP Fire Fighting Pump and motor including all connecting partsby replacing gland, greasing & oiling and rectification of alignment of pump and motor, cleaning the carbon from the electrical connections and commissioning complete all as directed. |
23 | Supply, fixing, testing and commissioning of Car Door Header Setand taking out old unserviceable one complete all as directed. |
24 | Supply, fixing, testing and commissioning of Auto Door controllerand taking out old unserviceable one complete all as directed. |
25 | Supply, fixing, testing and commissioning of Collapsible Gate Controllerand taking out old unserviceable one complete all as directed. |
26 | Supply, fixing, testing and commissioning of Controller wiring kit and taking out old unserviceable one complete all as directed. |
27 | Supply, fixing, testing and commissioning of Auto Door wiring kit and taking out old unserviceable one complete all as directed. |
28 | Replacement of matting in car cabin of1 to 2 ton capacity Lifts complete all as directed. |
29 | Supply, fixing, testing and commissioning of Microprocessor progammed Elevator/ LiftControl Mother board suitbale for full collective lift serving upto G+5 floors, with and including software, taking out old u/s one, complete all as directed. Make: Kone/Omega/ Johnson/UT/OTIS |
30 | Supply, install, testing and commissioning to automatic rescue device (ARD) includes Mirco processor programmed ARD Mother board,connected sensors complete comprising with the following accessories including taking out carefully old ARD from the machine room complete all as directed:- (a)UPS suitable for Lift Motor of goods/passenger lift - 01No. (b)Maintenance free dry battery suitable for UPS(12 V 17AH) of lift - 08 Nos. (c)SMPS - 01 No. (d)Transformer suitable to Lift motor - 01 No. Make: Kone/Omega/Johnson/UT/OTIS |
31 | Supply, fixing, testing and commissioning of Door Drive 2 HP, suitable for existing lift of any make, with and including takingout old unserviceable door drive, complete all as directed. Make: Fuji/yasakawa |
32 | Supply, fixing, testing and commissioning of Variable Voltage Variable Frequency drive 10/12.5/15HP suitable for lift of any type with and including feeding necessary parameters and taking down old unserviceable drive, complete all as directed. Make: Fuji/Yasakawa |
33 | Material and labour for enamel painting of lift cabin with spray painting metallic colour complete internally and doors, both cabin & loading type to match with existing colour including scraping & rubbing old paint complete all as directed Make: Asian Apcolite/Nerolac/Shalimar |
34 | S &F in repairs Door curtain suitable for existing lifts of 1 to 2 ton capacity of any make complete all as directed. |
35 | S & F in repairs Car ceiling along with lights and fan suitbale for existing lifts of 1 to 2 ton capacity of any make complete all as directed. |
36 | Maintenance of DG set and carrying out ‘B’ check and replacement of ‘B’ check kit filters such as Oil filter, by pass filter, fuel filter,CR element and CR plates complete with ‘O’ rings and draining of Engine oil and topping up with the new engine oil complete testing all as specified and directed by the Engr-in-Charge for the following capacity DG sets:- Note :- 1. Engine oil shall be measured and paid separately. 2. B Cheak to be carried out every after 250 hrs run or 6 months whichever is earlier. Make: KIRLOSKER/ CUMINS /GREAVES |
37 | 40 KVA DG Set |
38 | 70 KVA DG Set |
39 | 100 KVA DG Set |
40 | 125 KVA DG Set |
41 | 160 KVA DG Set |
42 | 250 KVA DG Set |
43 | 625 KVA DG Set |
44 | Renewal of unserviceable batteries with maintenance free batteries of 180 AH, 12V including connecting to DG set complete all as directed. Make:-EXIDE/ AMARON |
45 | Attending thebreakdown of any capacity/make DG Sets, AMF Panels, by Technician & helper for checking all components and identifying and rectifying the faults and give report to concerned JE complete all as directed. Note :- Spare Parts for rectifying the fault shall be measured and paid seperately. |
46 | S&F in repairsautomatic voltage regulator (AVR) upto 625 KVA DG set and testing complete all as directed. Make:- As per OEM make. |
47 | Dismantling of exhaust pipe of the DG set by unscrewing nuts and bolts and taking down the pipe with muffler, removing the burnt out asbestos rope and well wrapping with new aluminium metal cladding with glass wool including cleaning the silencer, and fixing the same in its original position complete all as directedfor the following capacity DG Sets. |
48 | 100KV to 625 KVA DG set. |
49 | Disconnecting all electrical connections from the unserviceable self starter of any make/ capacity model 24 volts, 180 /200 AH and taking down the self starter and transporting to civil workshop for carrying out repairs, complete overhauling the system including replacing the unserviceable parts such as bearing, carbon brushes, clutch plates etc refixing the self starter in its original position, testing and commissioning complete all as directed. Note:- Supply only Armature coil, field coil shall be measured and paid separately under relevant items of this Schedule fixing included inthis item. |
50 | Supply only Armature coil for self starter of any make of any capacity and of any model 24 Volts, 180/200 AH complete all as directed. |
51 | Supply only of field coil for self starter of any make, any capacity and any model 24 Volts, 180 /200AH complete all as directed . |
52 | Disconnecting all electrical connections from the unserviceable self starter of any make/capacity/model 12 volts, 180, 200 AH and taking down the self starter and transporting to civil workshop for carrying out repairs, complete overhauling the system including replacing the unserviceable parts bearing, carbon brushes, clutch plates etc refixing the self starter in its original position, testing and commissioning complete all as directed. Note:- Supply of Armature coil, field coil shall be measured & paid separately under relevant items of this Schedule. |
53 | Supply only Armature coil for self starter of any make, any capacity and any model 12 Volts, 180/200 AH complete all as directed. |
54 | Supply only of field coil for self starter of any make, any capacity and any model 12 Volts, 180/200 AH complete all as directed. |
55 | Disconnecting the oil cooler of 40 KVA to 625 KVA DG set of any make/ model from the existing locations duly removing of all mechanical connections and taking down the same for complete servicing opening the parts and cleaning thoroughly by using suitable cleaning material and acid and reassembling and refixing in its original position, testing and commissioning complete all as directed. |
56 | S&F in repairs air cleaning element inner and outer with necessary ‘O’ rings for the DG sets of following capacities as that of existing make and model complete all as directed. |
57 | Upto 110 KVA DG Set |
58 | 125 KVA to 160 KVA DG Set |
59 | 200 KVA to 625 KVADG Set |
60 | Disconnecting all the incoming and outgoing rubber hoses and draining out the water from the choked radiator assembly of the existing make and model and of various capacities of DG sets and taking down the radiator assembly by unscrewing all mechanical connections from the existing mounting, transporting the same to civil workshop for carrying out servicing, opening the top and bottom covers ofradiator assembly cleaning thoroughly the chocked pipe of the radiator by using detergent, lime caustic soda, cotton etc., cleaning of all the deposited sediments in the pipes/tubes including arresting of leakage by means of soldering, brazing and transporting back to site and refixing the same in its original position with suitable size nuts, bolts and washers etc., complete all as directed for the following DG sets:- |
61 | Upto 110 KVA DG Set |
62 | 125 KVA to 160 KVA DG Set |
63 | 250 KVA to 625 KVADG Set |
64 | Renewal of battery cable leads of copper conductorwith brass lugs terminal, for the 12V 180 /200 AHbatteries for self stater as that of existing size and length complete all as directed. |
65 | S&F in repairsautomatic cut off Battery Charger suitable for 12 V,up to 10 Amp Battery complete all as directed . Make SMPS/ Phonix |
66 | S&Fin repairs automatic cut off Battery Charger suitable for 24 V, up to 10 Amp Battery complete all as directed. Make:-SMPS/ Phonix |
67 | Renewal of "V" belts for the following capacity DG sets as perexisting size and model complete all as directed. Make:- FENNER/ DUNLOP |
68 | Upto 110 KVA DG Set |
69 | 125 KVA to 160 KVA DG Set |
70 | 250 KVA to 625 KVADG Set |
71 | Renewal of existing unserviceable water temperature gaugefor the DG set of any description complete all as directed. |
72 | Renewal of existing unserviceable lubricant oil temperature guagefor the DG set of any capacity complete all as directed. |
73 | Renewal of existing unserviceable oil pressure gaugefor the DG SET of any capacity complete all as directed . |
74 | Renewal of unserviceable Solenoid switchfor DG set of any make and any capacity complete all as directed. Make :- RUSTON/ GREAVES COTTON/Kirloskar/CUMMINS. |
75 | Supply and filling the new engine oil 15W/40 for toping up, upto the required level complete all as directed. Make :- CASTROL/ INDIAN OIL/ SERVO |
76 | Drain out the fuel from the fuel tank of DG set of capacity upto 1000 Ltrs and above and keeping it in separate container safely, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank for cleaning, internally and externally by removing all the accumulated dirt/ sediment, leak testing the tank and welding/ brazing including one coat ofsynthetic enamel paint, refixing the tank in its original position, replacing the drain plug and PVC pipe, calibrating the fuel tank, refilling the drained out fuel back into the tank and marking of liters in gauge and provision of locking arrangements complete all as directed. |
77 | Removing of defective engine oil control pressure switch and supply & fix new engine oil control pressure switch suitable for up to 625 KVA setcomplete all as directed. Make Kirloskar- Cummins |
78 | Renewal of defective wiring with copper wire of existing size including replacement of electrical/ electronic parts of AMF panel & DG Set, complete all as directed. Note: - Supply only Electrical/ Electronic spare parts shall be measured and paid separately. |
79 | Supply only of following spare parts: |
80 | Auxiliary contactor 240 Volts,(2NO.+2NC). |
81 | ON and OFF delay timer 240 V AC and 24 V DC. |
82 | Over load relay. |
83 | ML - 4 contactor. |
84 | Earth Fault Relay IRII-31-E1-WD Suitable for 250 V, AC. Make: C&S |
85 | Single phase preventer |
86 | Auxiliary Relays 24Volts / 6A |
87 | PLC based AMF relay unit |
88 | Low lube oil safety switch |
89 | Booster Relay 24Volts / 10A |
90 | Battery charger 24 V /10A panel mounting type |
91 | Coolant temparature sensor |
92 | LED indicating Lamp |
93 | Push buttons |
94 | Selector switches |
95 | Removing the defective charging dynamo of capacity 24 Volt DC any make, model, any capacity and opening it, by removing all nuts and bolts, cleaning with necessary cleaning agent and overhauling lubricating of the same replacing of armature, field coils reconnecting the same, refixing back, in original position testing and commissioning complete all as directed. |
96 | Supply & topping up ofInhibitor corrosion (coolant additive concentrate) as required(TVS Make) complete all as directed. |
97 | Supply and topping up of distilled water suitable for lead acid batteries of 12 volts complete all as directed. |
98 | Dismantling/taking out old unserviceable alternator (charging of battery) and taking out worn out spares such as ammeter, brush and field winding and repair the same by replacing ammeter, brush and rewinding of field coil with same guage of copper wire and testing complete all as directed . |
99 | Calibration of PT pump and replacement of PT Pump kit, gear gasket, etc whichever is required for smooth functioning of DG Set complete all as directed. |
100 | Calibration of injectors by replacing injector cup, barrel plunger for smooth functioning of engine, testing completeall asdirected . |
101 | S&F in repairsPVC insulated, heavy duty, unshealted ,multi Stranded Copper Cable of35 Sqmm single corewith suitable size lugs crimpedon both side complete all as directed. |
102 | S&F repairs Flexible Bellow suitableup to 625 KVA Gen Set. Make as per OEM |
103 | Disconnecting of alternator from 40 KVA to 625 KVA capacity DG set, after Disconnecting from Generaror shifting to civil workshop, taking out burnt out winding from Stator & Rotator, Cleaning thoroughly and rewinding the stator,rotor with suitable guage of super enameled copper conductor similar to that of existing size including necessary insulating material varnishing, heating,replacingbearings in rotor and stator side, reassembling of alternator, bringing back to the site refixing and installation over foundation with proper alignment, testing and commissioning complete all as directed. Note :- cost oftaking up and down from the site to workshop vice versa with vehicle and necessarylabour shall bedeemed to be included in quoted rates. |
104 | S&F in repairs MCCB 250 Amps capacity 4 pole 38 KA breaking capacity complete all as directed. Make: Schnider/Havells/C&S |
105 | Supply, fix and test run theFly-wheel Ringof existing model,size suitable for DG set of capacity 40 to 250 KVA including taking down old unserviceble fly wheel ring complete all as directed. |
106 | Supply and fixing in repairs Stanguard AutoTransfer switch (ATS) with enclouser of capacity 200 Amp 4 pole with automatic/manual with complete protectionall accessorices complete all as directed. |
107 | Supply, fixing,testing and commissioning Generator set control panel with Engine electron fuel controller for 125 KVAto 625 KVA DG Set of alongwith connected items i.e Fuel control governor, ausillary relays, engine harness wiring and alternator harness wiring, CTs, lube oil safety, oil pressure transducer, coolant temp sensor complete including taking down unserviceble generator set panel all as directed. Make : Kirloskar/Cummins (Existing) |
108 | Supply, Fix & test run the DG set after replacing Diesel feeder Pumpof existing model,sizesuitable to DG Set of capacity 125 to 625 KVA including taking down old unserviceable diesel feeder pump complete all asdirected. |
109 | M&L for removing old rusted paint fromDG Set surfacesof capacity upto250 KVA complete with one coat of Primer andtwo coats ofspray painting with existing colour paint synthetic enamel type including writing Ser No of DG set complete all as specified and directed. |
110 | Renewal of 3 pole 415 volts 50Hz Power Contactors of the following capacity including Connecting & testing complete all as directed by engineer-in Charge. MNX 25 Contractor or its Equivalent |
111 | S&F repairs MNX 40Contactor or its Equivalent |
112 | S&F Repair/ replacement of timer 0 to 60 mincomplete all as directed. |
113 | S&F LED 2"x2" type recess mounted lumniaire 36 Watt, Lumen Output -6500 lm, with Drive, connector block, etc. complete with all accessories internally pre-wired and including connecting up 3 core sheathed copper flexible cable 1.5 sqmm up to light fitting and connecting testing complete fixed on false ceiling complete. Make: Philips /Crompton/Havells/ Shakthi |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail