Tezpur University has published Tender For Providing Machine Foundation And Installation Including Aluminium Partition In Newly Renovated Store Room In The Dept Of Energy. Submission Date for this Tender is 21-11-2022. Foundation Work Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C work manually/by mechanical means including stacking of steel bars and disposal of unservicable material within 50 metres lead as per direction ofEngineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivqlent design mix) |
| 3 | Excavation work by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10Sqm on plan),including dressing of sides and ramming of bottoms,lift upto 1.5m , including getting out the excavated soil and disposal of surplus excavated soils as directed within a lead of 50m. |
| 4 | Ordinary Rock |
| 5 | Centering and shuttering including strutting,propping etc. and removal of form for |
| 6 | Foundations,Footings,bases of columns,etc.for mass |
| 7 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : |
| 8 | With common burnt clay F.P.S (non modular)bricks of class designatioon 7.5 |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level: |
| 10 | 1:3:6(1 cement : 3 manufactured sand derived from recycled concrete aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size recycled concrete aggregate (RCA) |
| 11 | Steel reinforcement for R.C.C work including straightening,cutting, bnding ,placing in position and binding all complete upto plinth level. |
| 12 | Cold twisted bars |
| 13 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing, and reinforcement -All work upto plinth level: |
| 14 | 1:1.5:3(1cement:1.5 coarse sand (zone lll) derived from natrural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 15 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 16 | 1:3(cement:3 fine sand) |
| 17 | Providing and fixing aluminium works for doors, windows, ventilators, and partitions with extruded built up standard tubular sections/appropiate Z sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size , including necessary filling up the gaps aaat neoprene gasket etc. at top bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium Sections shall be smooth,rust fee,straight,mitred and jointed mechanically whereever required including cleat angle,aluminium snap beading for glazing /paneling,C.P .brass / stainless steel screws ,all complete as per architectural drawings and the directions of enginer-in-charge.(Glazing,paneling,and dash fasteners to be paid for separately): |
| 18 | Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868 ,Minimum anodic coating of grade AC 15) |
| 19 | Providing and fixing 12mm thick prelaminated particle board flat pressesd three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminium doors,windows shutters and partion frames with C.P.brass/stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge. |
| 20 | Pre-laminated particle board with decorative lamination on both sides |
| 21 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partition etc.with EPDM rubber/neoprene gasket etc.complete as per the architectural drawings and the directions of engineer-in-charge.(Coast of aluminium snap beading shall be paid in basic items): |
| 22 | With float glass panes of 5mm thickness (weight not less than 12.50kg/sqm) |
| 23 | For shutters and doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) |
| 24 | Anodised aluminium(anodised transparent or dyed to required shade according to IS:1868,minimum anodic coating of grade AC 15) |
| 25 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc.complete as per direction of engineer-in-charge |
| 26 | Anodised (AC15) aluminium |
| 27 | Providing ridges or hips of width 60cm overall width plain G.S.sheet fixed with polymer coated J or L hooks ,bolts and nuts 8 mm dia G.I.limpet and bitumen washers complete. |
| 28 | 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 29 | Extra Labour & equipments charge for theinstallation of S.I. Engine. |
| 30 | Extra Labour & equipments charge for theinstallation of Diesel Engine |
| 31 | Extra Labour & equipments charge for theinstallation of Hydropower Experemental Setup |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
