|
| 1 | Supplying and installing uPVC- Casement Windows made out of Lead free green profile having \"GREENLINE\" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.a) Single leaf Side hung Window using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wallfor glass sash.With 5mm clear float glass(WINSTA KOMMERLING/ FINESTA/ ENCRAFT) |
| 2 | Supplying and installing uPVC- Casement Door made out of Lead free green profile having \"GREENLINE\" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, locking arrangement, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.(a) Single leaf Side hung Door using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame,58mm x 109mm x 2.4mm thick wall for glass sash, Aluminium threshold at bottom(WINSTA KOMMERLING/ FINESTA/ ENCRAFT)i) Using 5mm clear glass |
| 3 | (b) Double leaf Side hung Door with a Dummy Mullion - French Door using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame,58mm x 109mm x 2.4mm thick wall for glass sash, 58mm x 61mm x 2.4mm thick wall for dummy mulion, Aluminium threshold at bottom.(WINSTA KOMMERLING/ FINESTA/ ENCRAFT)i) Using 5mm clear glass |
| 4 | Supplying and installing uPVC- Fixed Windows made outof Lead free green profile having \"GREENLINE\" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with galvanized steel 1.5/2mm including glazing bead , grooving bead, drain cap, fisher screws, packing pieces, necessary stainless steel screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of Silicon sealant from inside / outside of dowcorning / GE or equivalent.With 5mm clear glass(a) Fixed window using uPVC sections of size 58mm x 52mm x 2.4mm thick wall for frame and 58mm x 68mm having 2.4mm thick wall for glass sash having reinforcement of 1.5mm thick in both frame & sash.(WINSTA KOMMERLING/ FINESTA/ ENCRAFT) |
| 5 | Plain cement concrete floor base in prop1:3:6 laid in alternatebays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick |
| 6 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises orrounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.a) In cement mortar 1:3 |
| 7 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed.(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Makeii) Of size 600mmx600mm and above |
| 8 | Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).i) Of size 300mmx450mm and above |
| 9 | Applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals /Dr. Sealkit Flexbond AP 122 C (Asian Chemicals) / MASTERSEAL 550EL of BASF for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels. |
| 10 | Providing and fixing double skinned partitions using G.I. sections High Pressure Steam Curednon asbestos Fibre Cement wall board conforming toIS 14862-2000 , fixed on frame work using 25mm fully threaded self embedding type Fibre Cement Screws @300mm c/c on either side of Steel G.I. 51mm studs (0.55mm thick having one flange of 40mm and another flange of 42mm ) placed at 600mm c/c in 51mm floor and ceiling channel (0.55mm thick havingequal flange of 32mm G.I. steel) with joints staggered to avoidthrough joints, all complete as per the drawing & direction of Engineer-in -Charge.The boards may be finished so as to have a uniform gap/groove or Flush finish.The flush finish should be done with Elasto prefab joint sealant. Everest Internal Jointing Compound and paper tape as per the procedure laid down by the company. Alternatively, the uniform gap/groove may be covered with decorative molding or may be finished with Jointing filler. Finally, if specified the boards to be painted with 2 coats of acrylic emulsion paint of approved shade/make, over a coat of cement primer before installing it on the grid.A. For Dry Areaii) Using 10 mm thick FC Wall boardofEverest make or equivalent |
| 11 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)A) Parryware makea) White(i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover) |
| 12 | Supplying, fiting and fixing PVC flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)i) Parryware makea) White(i)Economy Single Flush (Cat No.C8090/C8055) |
| 13 | Providing vitreous Chinawash basinwith CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal)(A) Parryware Make(a) White(iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380) |
| 14 | Providing fitting & fixingstainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipeetc. complete includingpainting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately(A) Parryware Make(i) Glister Jumbo (Bowl Size - 610 x 460 x 254) Glossy |
| 15 | Providing fitting and fixing Decorative Mirror complete as directed and specified.(A) Parryware Make (b) Size 600mm x 450mm |
| 16 | Providing, fitting and fixing Liquid soap dispenser and liquid soap containercomplete as directed and specified.(i) Jaquar Make(a) Continental (Cat.No.ACN-1135N) (with glass bottle) |
| 17 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.(a) Jaquar make (i) Continental towel ring square (Cat.No. ACN-1121) |
| 18 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.(a) Jaquar make (ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B) |
| 19 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. |
| 20 | (iv) 75mm dia. |
| 21 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages.(ii) 110mm dia. |
| 22 | (iv) 75mm dia. |
| 23 | Providing fiting & fixingC.I. Grating to the floors complete asdirected and specified.(a) 110mm dia |
| 24 | (b) 75mm dia |
| 25 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe(A)) Exposed or in trenchesc) 25 mm nominal outer dia pipe |
| 26 | (B) Concealed pipe with cutting chases & making good the wallsa) 15 mm nominal outer dia pipe |
| 27 | b) 20 mm nominal outer dia pipe |
| 28 | c) 25 mm nominal outer dia pipe |
| 29 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I)Jaquar(a) Continental / Clarion(ii)15mm dia( Angular stop cock ) |
| 30 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (I) Jaguar make (a) Continental |
| 31 | Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) (V) Jaquar branda) Continental / Clarioni) Sink cock with swinging casted spout |
| 32 | Supplying and fitting ball valve as specified and directed..a) 25 mm dia. (gun metal) |
| 33 | Supply & fixing of PVC Single layer Homogeneous Flooring 2.0mm thick as per EN 649having heat welded seams for join free installation, with corner coving, for heavy duty aplication as per EN 685, suitable for castor wheels furniure movement, antimicrobial and anti fungal, chemical resitant and antistatic behaviour, duly pasted on base CC floor usingmanufactureres recomended adhesive and good installation practice complete in all respect as directed by the engineer. |
| 34 | Supply & fixing of Homogeneous Wall Vinyl 1.0mm thick as per EN 649having heat welded seams for join free installation, with corner coving, for heavu duty aplication as per EN 685, suitable for castor wheels furniure movement, antimicrobial and anti fungal, chemical resitant and antistatic behaviour, duly pasted on base CC floor usingmanufactureres recomended adhesive and good installation practice complete in all respect as directed by the engineer. |
| 35 | Supply & fixing of modular tile based grid ceiling sytem having anti-mold, anti microbial, water repellent, high humidity RH95 resistance, soil resitance properterties suitable for ICU applicationcompete with all accessoried including suspenders etc as directed by the engineer. |
| 36 | Supply & fixing of Hospital Cubical Tracks and curtains as per following specifications:Track: Made of Alum Alloy (6063-T6). Of virgin material with corrosion resitance properties and standard white powder coating of 50-60 microns. The track should be bendable as required. The runner be made of derlin with two wheels & specially greased with silicon for frictionless movement. The hooks to be made of SS 304. THe ttrack to be roof suspended with aluminium pipe pf 12.3mm dia. Curtain: The material will be 100% polysester atain free with water repallent properties. The top 400mm of the custain to be Nylon Mesh. |
| 37 | Annexure-:Providing and fixing of manual Roller Blinds with Blackout comprising of Sunscreen fabric (Basket Weave) with Openness factor 5% having composition of 22% Polyester and 78% PVC of weight 475gsm±5% & thickness 0.68mm±5% and having fire resistance standard–DIN(4102) & BS Test,B2 & BF 5867 part2(Type B) Tensile strength (Warp 170N±10%, Weft 125N±10% as per ISO 544674). Color fastness 6-7/8 (ISO 105 B02-1994) Xenon Arc Lamp. The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 37mm into roller tube. It is self lubricating Exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch gear ration 1.75:1 for reduced operating force on larger blinds. Tube bearing plug idler Exclusive self lubricating spring loaded plastic bearing end plug with positive locking wheel allows for adjustment and provides for a secure installation and removal of shade.Tube bearing plug contain minimum 6 ribs and inserted a minimum of 37mm into roller tube. Mounting hardware brackets universal brackets including end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened steel with 46mm projection for wall, ceiling and side fitting with screws and end cap covers. Roller tube circular-shaped aluminum tube extruded from alloy 6060 and temper T66 – EN755 of 37mm inside diameter and outside diameter 40.2mm extruded tube to have a 1.6mm wall thickness with standard anodized natural finish. Heavily reinforced with minimum six internal ribs providing additional tensile strength and allows for secure placements of clutch and end plug. Bottom rail flat-shaped extruded aluminum from alloy 6060 and temper T66 – EN755 of dimension 13mm * 30mm and wall thickness of 1.5mm and weight of 390g/m. Rail standard finish of powder coat white color and provided cover. Ball chain shall be 2mm diameter cord with 4.5mm diameter acetal balls molded coaxially to it on 11.8mm pitch to form an endless ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic components are UV-stable compounds available white colour. - MAC Make |
| 38 | Wiring for circuit wiring withP.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 withflexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.)cable in surface/ recessedPVC2 mm thickrigidlow halogen SFT PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)wiring system.(a) with 2 x 1.5 sq. mm.cable in 20 mm dia. rigidlow halogen SFT PVC IS: 9537 Part - IIIconduit. |
| 39 | Wiring for drawing sub-main line withP.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 withflexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.)in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)withearth continuity in surface/ recessed 2 mm thickrigidlow halogen SFT PVC IS: 9537 Part - IIIconduit wiring system.(a) with 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. rigidlow halogen SFT PVC IS: 9537 Part - IIIconduit. |
| 40 | b) with 2 x 4 sq. mm. + earth continuity with1x2.5 sq. mm.in 20 mm. dia. rigidlow halogen SFT PVC IS: 9537 Part - IIIconduit |
| 41 | Wiring for drawing sub-main line withP.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 withflexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessedPVC2 mm thickrigidlow halogen SFT PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)wiring system. a) with 4 x 2.5 sq. mm. + earth continuity with2 x 1.5 sq. mm.cable in 25 mm. dia. rigidlow halogen SFT PVC IS: 9537 Part - III conduit |
| 42 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hagermake)4 way SPN doubledoor |
| 43 | Supplying with fitting and fixing sheet steel, phosphatised, powder painteddust & vermin proof reversible Double door IP-43 double door surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hagermake)4 way TPN (8+12)double door |
| 44 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.ABB, Schneider MG, legrand, Hagermake)8 way TPN (8+24)double door |
| 45 | Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted single door surface mounting vertical TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar up to 125A and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.ABB, Schneider MG, legrand, Hagermake)8 way TPN (4+24)single door |
| 46 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.B Series(Schneider MG, legrand, Hagermake)6 to 32A |
| 47 | 40A |
| 48 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.B Series(ABB, Schneider MG, legrand, Hagermake)6 to 32A |
| 49 | 40A |
| 50 | Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.B Series(Schneider MG, legrand, Hagermake)6 to 32A |
| 51 | 40A |
| 52 | 63A |
| 53 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.B Series (Schneider MG, legrand, Hagermake)6 to 32 |
| 54 | 63A |
| 55 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4PRCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 30mA sensitivity 4P RCBO(ABB, Schneider MG, legrand, Hagermake)25A |
| 56 | 40A |
| 57 | 63A |
| 58 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DPRCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.30mA sensitivity DP RCBO(ABB, Schneider MG, legrand, Hagermake)32A |
| 59 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure)of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.25 KA 415V 50 Hz 4P MCCB(Schneider, legrand, Siemens, Indo Asianmake) 125A |
| 60 | Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.ABB, Schneider, legrand, L&Tmake)125A |
| 61 | Supplying, installation, testing and commission of the following indoor Decorative Recessed mounted 2\" x 2\" LED down lighter luminares of model no-RC380 B LED OC/ LCTRS-36-TL/LCTRS-36-CDL/IO2830RP00/ IO2840RP00/ IO2850RP00 complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong/ Gypsum or similer ceiling mounting with necessary support with 1.5 sqmm. P.V.C. insulated S.C. copper conductor as required and as directed by the department(Philips/ Crompton/ LT make) |
| 62 | Supplying, installation, testing and commission of the following indoor Decorative Recessed mounted LED down lighter luminares of model no-DN 394B LED 16 S-6500 PSU WH/ MV1857RLOO/ MV1840RLOO/MV1830RLOO/ MV1857R5OO/ CRDL11R023HP57 complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong/ Gypsum or similer ceiling mounting with necessary support with 1.5 sqmm. P.V.C. insulated S.C. copper conductor as required and as directed by the department(Philips/ LT/ WIPRO make) |
| 63 | Supplying including fitting fixing of followingA.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.(CROMPTON /ORIENT/Havells/USHA or equivalentmake) Wall 43 , 400 mm sweep |
| 64 | Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO)including making necessary connection as per direction of department. |
| 65 | Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO)including making necessary connection as per direction of department. |
| 66 | Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO)including making necessary connection as per direction of department. |
| 67 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO)in surface/ recessedsystem complete as per direction of department.1-2 module type Metal |
| 68 | 3 module type Metal |
| 69 | 6 module type Metal |
| 70 | 9 module type Metal |
| 71 | 12 module type Metal |
| 72 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO)front plate of suitable colour as per direction of department.1 module |
| 73 | 2 module |
| 74 | 3 module |
| 75 | 6 module |
| 76 | 9 module |
| 77 | 12 module |
| 78 | SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMETmake) DOUBLE compression BRASS GLANDS WITH NICKEL - PLATEDWEATHERPROOF (CBW)Size: 18.5 - 20, 1 \" |
| 79 | WEATHERPROOF (CBW) Size: 23.5 - 26, 1- 1/4 \" |
| 80 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV GSolid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1)1988 armoured U.G. cableU.G. cable laid in ground/partially in air (as required for termination over groundincluding excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris etto proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .3 & 1/2 Core A2XFY35.00 Sq.mm.3 & 1/2 Core armoured U.G. cable |
| 81 | 95.00 Sq.mm.3 & 1/2 Core armoured U.G. cable |
| 82 | Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured/Armour (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1)1988, U.G. cable laid in ground/partially in air (as required for termination over groundincluding excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris etto proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 core A2XWY A2XFY16.00 Sq.mm 3 Core armoured U.G. cable |
| 83 | Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured/Armour (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1)1988, U.G. cable laid in ground/partially in air (as required for termination over groundincluding excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris etto proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 2, 2XWY 2XFY6.00 Sq.mm 2 Core armoured U.G. cable |
| 84 | 10.00 Sq.mm 2 Core armoured U.G. cable |
| 85 | 3 core A2XWY A2XFY4.00 Sq.mm 3 Core armoured U.G. cable |
| 86 | 4 Core, 2XWY 2XFY4.00 Sq.mm.4 Core U.G. armoured cable |
| 87 | 6.00 Sq.mm.4 Core U.G. armoured cable |
| 88 | 10.00 Sq.mm.4 Core U.G. armoured cable |
| 89 | 16.00 Sq.mm.4 Core U.G. armoured cable |
| 90 | Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG/STRUTFASTmake). Size of Tray152 |
| 91 | SUPPLYING FITTING AND FIXING OF(DOWELLS/ COMETmake) Copper REDUCER terminal. Copper REDUCER terminal. Size: 2.5 |
| 92 | Copper REDUCER terminal. Size: 4 |
| 93 | Copper REDUCER terminal. Size: 6 |
| 94 | Copper REDUCER terminal. Size: 10 |
| 95 | Copper REDUCER terminal. Size: 16 |
| 96 | SUPPLYING FITTING AND FIXING OF(DOWELLS/ COMETmake) ALUMINIUM REDUCER terminal. Size: ALUMINIUM REDUCER terminal. Size: 20 |
| 97 | ALUMINIUM REDUCER terminal. Size: 35 |
| 98 | ALUMINIUM REDUCER terminal. Size: 50 |
| 99 | ALUMINIUM REDUCER terminal. Size: 95 |
| 100 | Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 50 mm dia. 3.00 Metres length corrosion free Single pipetechnology- CopperCHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 Kand Advance Earth Pit cover (PVincluding excavation of earth pit and construction of brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt. |
| 101 | Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt. |
| 102 | Supply, fitting & fixing 20 mmx3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of BrassNuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode copper strips and Lightning Arrestor etc. as specified and directed by the deptt. |
| 103 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.)to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. |
| 104 | Supplying including installation, testing and commissioning ofAir/Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8 p.f.mounted on a1)M.S. Fabricated base frame.,2)M.S. fuel tank of required capacity.,3)Residual Silencer.,4) AMF Control Panel.5)Suitable batteries with lead.,5) First fill of lubeoil.,6)Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the Technical Specification.. as per manufacturer. (RANGE FROM 5 KVA TO 625 KV . Kirloskar green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and Kirloskar, Stamford, Leroy somer or equivalent alternator.KVA- PHASE- Approx size- Approx Wt-COOLING62.5 3 3980x1240x1680 1920 Kg A/C |
| 105 | Supplying including installation ofUPS6 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology230V AC Input (160V – 280V A 1 Ph input- 1 Ph outputWith Isolation Transformer4.8KW output with 0.8 output PF120 min backup using SMF battery |
| 106 | Supply,Installation, Testing and Commissioning of Variable Refrigerant Volume type multi unit air-conditioning system complete with indoor and outdoor units with individual controller for cooling operations.The quoted price should include cost of all material, consumable, all taxes, labour, commissioning etc. (Make: Daikin)Variable Refrigerant VolumeOutdoor Unit complete with hermitically sealed scroll compressor as per following nominal capacities complete with protective coated fins, mounting frame, casing, microproccessor panel, and other standard accessories : i) Microproccessor panel ,ii) First charge of refirigerant R 410A , iii) Protective coated finsiv)Mounting frame with isolation pad , all required accessories, structural support and civil foundation. v) Interconnecting Pipes for Liquit, Discharge and Suction vi) Interconnecting Cables and Earthing from nearest given point . All Inverter Scroll Compressor(s) with variable refrigeration evaporating temperature enabled feature in outdoor unit capable of inverter control with 6 pole compressor motor. The inverter compressor should be capable of changing the speed in accordance to the variation in cooling or heating load requirement, back pressure control mechanism for efficient operation in low-load condition.The outdoor unit should be fitted with low noise, aero spiral design fan with minimum External Static Pressure of 75 Pa for easy discharge of Hot air, aero fitting grille, to reduce pressure loss.The outdoor unit should be capable of automatic refrigerant charge function. The heat exchanger shall be constructed with copper tubes mechanically bonded to aluminium fins to form a cross fin coil.Capacity: 20 HP ( Heating & cooling) |
| 107 | Supply installation testing and commissioning of DOUBLE SKINNED AIR HANDLING UNITSWITHALL CONTROLS.AHU Specifications:Skin Type: Double skin with 0.6mm Pre Coated GI Outer & 0.6 mm Plain G.I. InnerFrame Work: Thermal Break Al. Profile with Thermal BarrierPanels: 43 mm thick, CFC Free 40 Kg/Cu M Density PUF InjectedDrain Pan: 1mm SS Primary Tray with 0.6mm GI Covering sheet & sandwiched insulation of 25mm thick PUF in betweenUnit Base: GSS base channelCoil Type: DX suitable for R-410; Copper; 12 FPI ; 500 CFM/ Sq FT; Target ADP: 10.5 deg C (No of Rows of 6RDCoil & Distributorsuiatble for 12 HP x 2 Nos Circuit in cooling coil Capacity)Pre Filter: EU-4; 90% effeciency down to 10 Micron; Box Type; Filter Face velocity : 500 FPMFine Filter: EU-7; 90% effeciency down to 03 Micron; flange Type; Filter Face velocity : 500 FPMHepaFilter EU : ; 99% effeciency down to 03 Micron; flange Type; Filter Face velocity : 500 FPMHeater: 2kW x 3 SS-304 Strip HeaterFan Section: 4000 CFM / 125mm wg SP / Fan Outlet Velocity 9 m/s; DIDW Backward Curved; EFF-1 MotorDamper: SA, RA, FA damper in leak proof Aluminium ConstructionConfiguration: Horizontal floor Mounted as described below:AHU acessories: a. Double Skin Heater Bank Chamber comprising of SS 304 spiral strip heaters (2kW x 3Nos)fitted with Porcelene blocks, Safety air stat & access door for heater rating b. Control & Integration: All control and integration is in scope of the system inegrator and power will be provided at onepoint near the AHU including AHU VRV Kit |
| 108 | Hard drawn copper piping in brazed construciton, complete with O class nitrile rubber insulation, supports/suspenders, as per enclosed specifications. Minimum wall thickness of copper refrigerant pipes shall be as per Copper pipe-ASTM B88, L-Type standard. BRAZZING TO BE DONE ONLY WITH HARRIS USA BRAZING ROD.Line Size: 28.6 OD with 19mm thick Nitrile Insulation with glass cloth & UV Lag paintLine Size: 15.9 OD with 13mm thick Nitrile Insulation with |
| 109 | glass cloth & UV Lag paint |
| 110 | Supply, Installation, Testing & Commissioining of Shielded control cum transmission cabling between ODU & IDU 2 X 2C X 1.0 Sqmm Cu Cable in Riggid PVC Conduit duly supported and saddled as per specification & as directed by the consultant. |
| 111 | Providing and fixing condensate drain piping with u-PVC pipe with 9mm thick nitrile tube insulation of following sizes including making wall chases to completely embedd the pipes inside the wall, making good the wall cut and finally finishing with POP to good finish. One end on the pipe will be connected to the indoor unit of the air conditioner /AHUand the other end will be terminated to the nearest apron drain or suitable termination drain pipecomplete with all fittings and support etc complete in all respect as directed by the engineer. (Supreme/Ashirvad/Astral)25mm dia |
| 112 | 40 mm dia |
| 113 | Supply , fabrication & fixing of of GSS leak proof sheet metal rectangular ducting with slip on flangesas per IS 655complete with turning vanes , companion flanges , structural support , sealing of all seams with a suitable metal sealant, completely leak proof as per drawings and as directed by the engineer. (Sail / Tata )0.60 MM (24 gauge) |
| 114 | 0.80 MM (22 gauge) |
| 115 | Supply and fixing ofinternal duct lining for duct accoustic insulation with 15 mm thick Nitrile Open cell elastometric nitrile rubber applied with rubber based adhesive, screw, washer complete in all respect as specified in specifications & drawings. |
| 116 | Supply and fixing of 13mm thk duct thermal insulation withO class nitrile insulation with factory pasted onthe duct usingDendrite or equiv. adhesive. The insulation seams will be pasted with 50mm wide alum tape and PVC strapping rollstrapping will be provided at 1000mm intervals. |
| 117 | Supply, installation testing and balancing of square shape ceiling diffusers with removable core.Extruded aluminium construcion, power coated with volume control damper |
| 118 | Extruded aluminium construcion, power coated without volume control damperr |
| 119 | Supply, installation, testing and commissioning of extruded aluminium power coated 15°/30° linear grills of approved shade and make |
| 120 | Extruded aluminium construcion, power coated with volume control damper for grils |
| 121 | Supply, installation and balancing of extruded aluminium power coated fresh / exhaust air louvers complete with GI dampers, GI Cowl& aluminium wire mesh birdscreen( Mapro) |
| 122 | Supply and fixing of 200mm diainsulated flexible duct made ofdouble lamination of films permanently bonded to a coated spring tough steel wire helix having a blanket of fiberglass wool insulation inside, the outer jacket is made of double laminated film with fiberglass yarn reinforcement, which is fixed to GI Spiggot fixed to ducts using GI jubilee clampas specified in specifications & drawings. (Note: The contactor will provide adequate support/harness measures ensuring that there is no sagging of duct which will prevent airflow.) |
| 123 | Providing & fixing200mm dia G.Ispriggot for connecting flexible duct to G.i Ducts of following sizes including cost of Nylon grippers |
| 124 | Supply, installation, testing and commissioning of Alum.leaf proofDuct Damper |
| 125 | Supply, Installation, Testing & Commissioining ofInsulated (13mm Nitrile) 0.6mmGI construction plenum for diffusers suitable for spigot connection including hardwarre from suspension from ceiling slab complete in all respect. Suitable for 300x300mm Diffusers. |
| 126 | Supply , installation , testing and commissioning of 4 Tr Air Cooled Unitary Cassette type Air Conditioners suitable to operate from 415+- 10% volt , 50 Hz , 3 phase power supplyand consisting of hermitically sealed scroll compressor and having R22 as refrigerant . (Make Voltas/Bluestar/Daikin)(Deducting for taking back ownership of existing old damaged / non repairable 7.5TRX3 Air conditiong machines with all damaged electrical accessories including loading carriage etc. as directed by the deptt.) |
| 127 | Supply and fixing copper refrigerant piping using bright annealedhard drawn copper refrigerant piping for 4Tr Cassette AC with 13mm thick nitrile tube insulation and GI wall fixing & ceiling suspension accessories as per site requirementcomplete in all respect. |
| 128 | Supply, installation, testing and commissioning of moterised combinedsmoke and fire dampers made out of GI sheet of at least 120 minutes fire rating complete with GI damper of required size, smoke sensor etc as per specifications and shop drawings. |
| 129 | Actuator & Control panels for Smoke & Fire Damper |
| 130 | Providing application of Fibre Glass. cloth & U.V paint on External insulated supply/return air duct for weather protection. |
| 131 | Providing, fabrication & erection of MS frame structure for ODU units as per design of the consultant including rust treatment with zinc chromate primer and 3 coats of epoxy paint . |
| 132 | Supply, installation, testing and commissioning ofCivil foundation for Outdoor Unit |
| 133 | Supply, installation, Testing & Commissioning of AHU Panel,as pertechnical specification and consultants drawings as per requirement and as directed by the consultant:Incoming feeders - 1 nos 1 Nos-FP 100kA Type 1 & 2 SPDEach of the incoming feeder will consist of 1 Nos 63A FP MCCB 16kA (microprocessor type)1 Lot - Indicating Lamps1 Set - Digital Multimeter (V,I,F)3- C.T 100/5A,5VA,Cl-1.01 Lot -Control Fuse, SP MCB, Accessories as required1Set -63 TPN Alum Bus Bar of 16kA Short circuit rating for 1 Sec with heat shrunk colour coded PVC sleeve fitted using DMC/SMC mountsOutgoings feeders as follows: All out going feeders will have All MCCB will be thermal magnetic type1 Nos - Extended Rotary HandleFeeder Ratings are furnished below:2 Nos- 16A FP MCB 10kA1 Nos- 16A TP MCB 10kA1 Nos- 63A FP MCB 16kA1 Nos- 16A DP MCB 10kA1 Nos- 6A DP MCB 10kA |
| 134 | Providing and fixing IP65 grade 4 WAY SPN DB for external installation including water proof entry and exit of cables |
| 135 | Installation charge of Split type AC machine of 1.00 Ton to 2.00 Ton capacity |
| 136 | Supplying with fitting and fixing rebuilt Rotary compressor in exchange of existing burnt out compressor complete with overhauling the Machine, Gas charging with fresh refrigerant and testing etc complete 2.00 Ton Capacity |
| 137 | Gas Charging of Split type A.C. with F-22 fresh refrigerant 2.00 Ton Capacity |
