Military Engineer Services-MES has published Tender For Comprehensive Br Repairs To Joinery, Plumbing, Sanitary Fittings And Flooring And Misc Br Items At 2 Cdu And Sho, Sainik Aramgraha, Campo Platoon And Asha School And Certain Br Reapirs To Dad Md Accn Building At Age Br Ii Under Ge (South). Submission Date for this Tender is 28-11-2022. Civil Work Tenders in ambala Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Nov-2022 | CORRIGENDUM01 | Date | 21-11-2022 |
| 2 | 10-Nov-2022 | CORRIGENDUM02 | BOQ | 21-11-2022 |
| 3 | 10-Nov-2022 | REVISED TENDER DOCUMENTS | Other | 21-11-2022 |
| 4 | 21-Nov-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-11-2022 |
| Sl. No. | Item Description |
| 1 | Supply & fixed (in repair) of 15 mm fancy type, chromium plated, angle cock,/ stop cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed. (Note : Weight of aggle cock /stop cock shall not be less than 0.575 Kg) |
| 2 | Supply & fixed (in repair)of CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated`with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed. (Note : Weight of bib tap shall not be less than 0.575 Kg) |
| 3 | Supply and fixing (in repair) of vitreous china squatting pan of orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of anypattern complete including provision of lime concrete bed and connection to flush pipe (excluding flushing cistern, flush pipe) and bracket and making good the disturbed area complete all as specified and directed. |
| 4 | Supply & fixed (in repair) of vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed. |
| 5 | Supply & fixed (in repair) of vitreous china urinals, flat back of size 465mm x 355mm x 265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed. |
| 6 | Supply & fixing (in repair) of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks, PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including32 mm dia PVC waste pipe etc., complete all as specified and directed. |
| 7 | Supply & fixing in repair of vitreous china, white coloured, counter top wash hand basin, oval type, including cutting for and pinning in, but excluding waste pipe complete all as specified and directed. |
| 8 | Supply & fixing in repair of vitreous china, white coloured, counter sunk wash hand basin, oval type, including cutting for and pinning in, but excluding waste pipe complete all as specified and directed. |
| 9 | Supply & fixing in repair of WHB mixer (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed. |
| 10 | Supply & fixing in repair of fancy type brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 11 | Supply and fixing in repair offancy type, shower rose 125mm size , brass Chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified and as directed. |
| 12 | Supply & fixed in repair of 10 litre capacity flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/ flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed. |
| 13 | Supply & fixing in repair of fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 14 | Supply & fixing in repair of 5.5 mm thick bevelled edge looking mirror of, selected quality and glazing wooden beadin square/ reacangulerexc 0.5 Sq m each in panes, mounted on 6 mm thick AC bldg board or commercial plywood, fixedwith aluminium angled frame and two CP MS hanging arrangements all complete all as specified and directed. |
| 15 | Supply and fixing in repair of 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 16 | Supply and fixing in repair of PVC coloured bath cabinet overall size 400 x 500 mm decorative design with looking mirror, nepkin rail complete all as specified and as directed. |
| 17 | Supply and fixed (in repair) of CP Hand shower (Health faucet) shower including 1.50 meter long flexible tubecomplete all as specified and directed. |
| 18 | Supply & fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or infloors or in trenches includingdismantling ofrain water pipes of any description any length including bends etc complete all as specified and as directed. |
| 19 | Supply & fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or infloors or in trenches includingdismantling ofrain water pipes of any description any length including bends etc complete all as specified and as directed. |
| 20 | Supply & fixingof PVC (SWR) bends 110 mm bore complete all as specified and as directed. |
| 21 | Supply & fixingof PVC (SWR) bends 75 mm bore complete all as specified and as directed. |
| 22 | Supply and fixing in repair ofPVC (SWR) floor trap, plain with grating including jointing with solvent cement of outter diameter outlet of 75mm complete as specified and directed. |
| 23 | Supply and fixing in repair of 110 mm bore PVC (SWR) junction single T (equal or unequal) with access door, including jointing with solvent cement, complete all as specified and directed. |
| 24 | Supply and fixing in repair of 75 mm bore PVC (SWR) junction single T (equal or unequal) with access door, including jointing with solvent cement, complete all as specified and directed. |
| 25 | Supply and fixing in repair of 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 26 | Supply and fixing in repair of 100/125 mm dia CP grating any type fixed in floor and jointed in CM 1:3 complete all as specified and as directed. |
| 27 | Supply and fixing in repair of tanks cover with locking arrangement as per sample for 500/1000 litre capacity PVC water storage tank complete all as specified and as directed. |
| 28 | Supply and fixing in repair of ball brass valves,of 15mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 29 | Supply and fixing in repair ofball brass valves,of 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 30 | Supply and fixing in repair of CP Jet spray for with 1.5 mtr long pipefixed in EWC complete all as specified and as directed. |
| 31 | Supply and fixing in repair ofPVC waste pipe 32/38mm dia flexible PVC hose pipe of standard length/size suibable for wash basin/ urinal complete all as specified and as directed. |
| 32 | Supply and fixing in repair of brass CP toilet paper holder, recessed type, fixed to wall with brass CP screws complete all as specified and as directed. |
| 33 | Supply and fixing in repair of 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 34 | Supply and fixing in repair ofsoap dish, any type, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 35 | Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 36 | Supply & fixingof 15 mm bore, UPVC pipe, ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 37 | Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 38 | Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed andsuitable for iron pipe 20 mm bore including dismantling of old tanks of of any description complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank. |
| 39 | Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed andsuitable for iron pipe 20 mm bore including dismantling of old tanks of of any description complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank. |
| 40 | Cleaningand removing all scaleand dirt, etcfrom existing water storage tanks of capacityexceeding 250 litres andnot exceeding 500 litres by emptying,drying and cleaning the tank by scrubbing the dust with wire brush from tank includingcleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge of cleaning,including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process ofdisconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. |
| 41 | Cleaningand removing all scaleand dirt, etcfrom existing water storage tanks of capacityexceeding 500 litres andnot exceeding 1000 litres by emptying,drying and cleaning the tank by scrubbing the dust with wire brush from tank includingcleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge of cleaning,including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process ofdisconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. |
| 42 | Taking down existing aluminium door shutter and readjusting, replacing damaged parts like jointing cleats, glazing clips, Neoprene/ EPDM rubber gasket, anodised aluminium snap beading, hinges,screws, locking bolts,door stoppers,handles etc. complete all as specifiedand directed. Note: Glass pane, wire mesh, hydraulic door closer, floor spring and mortice lock will be measured and paid separately |
| 43 | Supply and fixing in repair of double action floor spring hydraucally regulated made of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors complete all as specified and directed. |
| 44 | Supply and fixing in repair of aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed |
| 45 | Supply and fixing in repairs rubber Neoprene/ EPDM rubber gasket for aluminium door & windows complete all as specified and directed. |
| 46 | Supply and fixed in repair of sheet glass 3mm thick, ordinary quality and glazing with oil putty, in square not exceeding 0.5 Sqm each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed. |
| 47 | Supply and fixed in repair of 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane with oil putty or fixed with beads complete all as specified and directed. |
| 48 | Supply andfixing of 5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame ordoor with glazing clips, etc. including hacking out old glass complete all as specified and as directed. |
| 49 | Supply and fixed in repair of galvanized mild steel wire cloth with 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with finned tacks or galvanized wire staplecomplete all as specified and as directed. |
| 50 | Supply and fixed in repair of 75 mm long mortice lock with two levers (vertical type), mild brass body in aluminium doorcomplete all as specified anddirected. |
| 51 | Supplyand fixing in repair of 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed . |
| 52 | Supplyand fixing in repair of 200mm long aluminium anodised barrel tower bolts of extruded section complete as specified and directed. |
| 53 | Supply and fixing in repair of 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed. |
| 54 | Supply andfixingin repair of 250 mmaluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed. |
| 55 | Supply and fixing in repair of butt hinges, medium weight, cold rolled, mild steel, ISI marked 100 mm sizecomplete all as specified and directed. |
| 56 | Supply and fixing in repair of butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100 mm longcomplete all as specified and directed. |
| 57 | Supply andfixing in repair of hasp and staple 75 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixing screws, complete all as specified and as directed. |
| 58 | Supply and fixingin repair of 150mm long floor door stopper of aluminium alloy body & tongue, anodized with hard drawn steel spring complete all as specified and as directed.. |
| 59 | Material and labourforwelding in repair n.exc 2.5cm in length thickness of metal to be welded exc 6mm not exc 9mm in different location complete all as specified and directed. |
| 60 | Material and labour forrepair related to welding in repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying welder and helper for welding exc 2.5cm andn exc 5.0cm in lengththickness of welded exc 6mm and n exc 9 mm in different locations complete all as specified and directed. |
| 61 | Supply, fabricate & fixing in position of anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5.5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below,including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed by Engr-in-charge. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall beof size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mentionedin relevent Appx |
| 62 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)with powder coating of any colour (Thickness or powder coating notless than 50 micron) complete all as specified and directed |
| 63 | Supply & fixing of 12 mm thick toughen glass shutters (openable type), with diamond polished clear glass including all hardware fittings detailed as under, fixed in position as per manufacturer instruction complete. (a) Stainless steel top patch01 Set. (b) Stainless steel top pivot01 Set. (c) Stainless steel bottom patch 01 Set. (d) Glass to wall Stainless Steel lock01 No. (e) Stainless steel floor door spring 01 Set. (f) Stainless Steel Handle 300 mm size - 2 Nos for each shutter etc. complete all as specified and directed. |
| 64 | Supply andfixing of powder coated aluminum frame (minimum thickness of powder coating 50 micron) as in frame of door/ window / partitions , etcwith one or more rebates including hinges, handles, jointing cleat for fixing etc. complete all as specified and directed. |
| 65 | Supply andfixing of powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed |
| 66 | Supply andfixingof 5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame ordoor with glazing clips, etc. complete all as specified and directed. |
| 67 | Supply and fixingof 150mm long floor door stopper of aluminium alloy body & tongue, anodized with hard drawn steel spring complete all as specified and as directed.. |
| 68 | Taking down chowkats or frames with shutter, areanot exceeding 1.50 Square metre(w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. |
| 69 | Taking down chowkats or frames with shutter, areaexceeding 1.50 Square metrebut not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. |
| 70 | Taking down shutter of any descritption exc 1.00 sqm each but not exc 2.00 sqm each including removal from site complete all as specified and directed. |
| 71 | Supply and fixing of pressed steel frames for doors of size 125 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. |
| 72 | Supply and fixing of IInd class hard wood factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. |
| 73 | Supplyand fixing of factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed. Note:- Manufacturers Test certificate to be submitted before incorporation. |
| 74 | Supply and fixing factory made PVC hollow door frame of size 50mm x 47mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos, 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos of screws to be provided for each vertical numbers & minimum 02 Nos for horizontal member) complete all as specified and directed. |
| 75 | Supply andfixing of factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face includingfixing in frame at site with 03 Nos SS hinges, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed. |
| 76 | Supply and fixing of steel window box type using ERW hollow "P" section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick,jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable including PCC(C-O ,1:3:6 using 12.5 graded agg) bed blocks for hold fasts and one shop coat of red oxide primer etc complete all as specified and directed. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery , grills 10mm square bars. (iii) Only Glazing, wire mesh & painting grill shall be measured & paid for separately) |
| 77 | Supply and fixing in repair of 2nd class hard wood, plain fillet square rectangular or tringular in section clean swan secured with nails or breads sectional area exc 13 sqcm but not exc 25 sqcm complete all as specified and as directed. |
| 78 | Supply and fixing of butt hinges, medium weight, cold rolled, mild steel, ISI marked 100 mm sizecomplete all as specified and directed. |
| 79 | Supplyand fixing of 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed . |
| 80 | Supplyand fixing of 200mm long aluminium anodised barrel tower bolts of extruded section complete as specified and directed. |
| 81 | Supply andfixingof 250 mmaluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed. |
| 82 | Supply andfixing of sheet glass 3mm thick, ordinary quality , in squarenot exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed. |
| 83 | Supply and fixed of galvanized mild steel wire cloth with 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with finned tacks or galvanized wire staplecomplete all as specified and as directed. |
| 84 | Supply and fixingin repair of 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shelves, shutter complete all as specified and as directed. |
| 85 | Supply and fixing of 75mm Hasp and staple, mild steel, wire type, stove aluminium anodised , including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 86 | Supply and fixingin repair of continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm complete all as specified and as directed. |
| 87 | Material andlabour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 88 | Material and labour for preparing new or previously untreated wood or wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 89 | Supply and fixing in repair of aluminium pre coated of choice colour designed type25 mm tubular rod in curtain rod, 1.6mm fancy type including PVC golden colour brakets, latto and wall to wall socket etc., complete all as specified and directed. |
| 90 | Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applyingof the following specifications and sequence complete as specified and directed:-(i)Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. andremove all loose /unsound material, dirt, dust etc. (ii)Applying cement slurry mixed with acrylic based polymer moodified cementitous composite compound coating. (iii)First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. (iv) Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours.(v)200 micron thick polythene film shall be pasted with help of adhesives over treatment.Note- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. |
| 91 | Mterial and labour for PCC 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in floor filling & mass concrete for sunken floor in WC/Bath etc including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 92 | Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course etc including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 93 | Material and labour for 75mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in hard standing, flooring and paving/path etc, finishing even and smooth without using extra cement,including demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness below or above ground level complete all as specified and directed. |
| 94 | Material andlabour for premium quality, light shade virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 95 | Material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 96 | Material & labour forpremium quality coloured glazed ceramic tiles (300x 450x 7mmthick)in vertical surfacesand jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 including dismantling of old floor or wall tiling including cement mortar bedding and removing the rubbish outsidethe defence land complete all as specified and as directed. |
| 97 | Material and labour for 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding, moulding and polishing on edges etc including dismantling of existing stone /tiles etc including cement mortar bedding andrubbish off the premises complete all as specified and directed. |
| 98 | Material and labour for machine cut kota stone slab 20-25 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) including dismantling of existing stone/tiles etc including cement mortar bedding andrubbish off the premises complete all as specified and directed. |
| 99 | Material and labour for machine cut kota stone slab 18-20 mm thick (size of each stone not less than 55cm x 55cm), laid on vertical surfaces of skirting/dado, over and including cement screed bed 15 mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) including dismantling of existing stone slab/tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 100 | Supply andfixing for heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed, including dismantling of floor or wall tiling including cement mortar bedding and removing the rubbish outsidethe defence land complete all as specified and directed. |
| 101 | Material and labour for mirror polishing on existing kota stone/ stone work where ever required to give high gloss finish including repair/ replacement of broken kota stone complete all as specified and diected. |
| 102 | Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed. |
| 103 | Material andlabour for 15mm thick rendering in cement mortar (1:6)on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 104 | Material andlabour for 15mm thick rendering in cement mortar (1:4)on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 105 | Material and labour for 10mm thick cement plaster in CM (1:3) to ceiling surfaceand finished the surface even and smooth without using extra cement with and including applyingthree coats of white wash on ceiling complete all specified and directed. |
| 106 | Material andlabour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed. Note:-(i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered |
| 107 | Material andlabour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE. |
| 108 | Material and labour for carrying out efflorescence treatment to unplastered wall surface comprising of the following specifications and sequence with and including 15 mm thick rendering in CM 1:4 finished even and smooth without using extra cement : - (a) Prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent : - (i) Pidicrete URP of M/S Pidilite. (ii) Sika Latex of M/S Sika. (iii) Nitobond SBR Latex of M/S FOSROC. (b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied “BY HAND” while the prime is tacky. PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer’s instructions: -(i) Pidicrete URP of M/S Pidilite. (ii) Sika Latex of M/S Sika. (iii) Nitobond SBR Latex of M/S FOSROC. (c) PMM surface should be allowed to dry for one day. After that it should painted with two coats of one of the following compound mixed with cement only in ratio of 1 (selected compound) : 1:5 (Cement) : - (i) Pidicrete URP of M/S Pidilite. (ii) Sika Latex of M/S Sika. (iii) Nitobond SBR Latex of M/S FOSROC. (d) Now apply two coats of one of the following compound over the surface. These compounds are to be used as per manufacturer’s instructions: - (i) Pidifin 2K of M/S Pidilite. (ii) Brush Coat of M/S Sika. (iii) Brush Bond of M/S FOSROC. NOTE : - Both coats should be perpendicular to each other and gap between two coats shall be minimum 6 hours. (e) Sprinkle loose coarse sand after second coat while surface is tacky. NOTE: - (i) The item will be executed by authorized applicator only of the selected / approved company. Contractor shall submit details of authorised applicator for approval of GE before commencement of work in respect of above item. (ii) Every stage of work will be approved by GE, then only next layer will be executed by contractor. |
| 109 | Material andlabour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of wall care putty not less than 1mm thick etc complete all as specified and directed. |
| 110 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primeron walls complete all as specified and directed. |
| 111 | Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 112 | Material and labour for brick work (except bricks) straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 (old size brick)including demolition of old brick masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 113 | Material and labour for brick work with sub class-"B" Bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 114 | Supply and fixingof 5 mm thick plain colour PVC sheet, solid PVC wall paneling/ liningPVC sheet inclusive of solvent cement and fixing at site with and including5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down ofexisting wall lining, board or insulation boardincluding cover fillets of any type and thick complete all as specified and as directed. |
| 115 | Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqmincluding both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, crossT of size 15 x32 mm of length 1200mmand secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm.galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws.The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed. |
| 116 | Supply and fixing of PVC false ceiling consisting of 600 mm x 600 mm, 5mm (+ 0.25) thick plain embossed PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x 1" (25 mm x 25 mm, 1 mm thick) in square pattern of grid sizes of 2" x 2" (600 mm x 600 mm). The aluminium framework is supported from the ceiling with the help of "J" hook and G.I. wire / 4mm MS rods of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) angles etc. complete as per direction of Engineer - In- Charge, manufacturer, s specification and drawing including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description complete all as specified and directed. |
| 117 | Material and labour for re-securing/ adjusting existing false ceiling grid any type and making required tightning to remove sag portion/ depression in false ceiling grid including replacement of missing sections / suspendersetc complete all as specified and directed. |
| 118 | Supply and fixing missing / damaged perforated ceiling boards in existing gridas per existing size required on front face etc complete all as specifiedand directed. |
| 119 | Supply and fixing missing / damaged PVC ceiling boards in existing gridas per existing size etc complete all as specifiedand directed. |
| 120 | Supply and fixing of steel tube 50 mm bore, medium grade galvanized, ISI marked, fixed to wallsas in additional support of ceiling, etc including cutting & chasingin wall andmaking good with PCC to old existing surface complete all as specified and directed. |
| 121 | Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of alkaline resistant primer complete all as specified and directed. |
| 122 | Material and labour for complete removal of existing treatment on surfaces of walls, chajjas, fascias etc and effloroscent salts and treating oil and greasy spots washing down with water and applying two coats of cement base paint over a coat of alkaline resistant primer including filling up all cracks with tar plastic (STP) crack filler and also, make good to plastered surface complete all as specified and directed. |
| 123 | Material and labour for completeremoval of existing treatment on walls, chajjasfacias etc and efflorescent salts and treating oil and greasy spots washing down with water and freeing the surfaces from all loose dirt and applying two coats of 100% Anti fungal acrylic emulsion paint (Appex)or equivalent over a coat of primer including necessary scaffoldings, complete all as specified and directed. |
| 124 | Material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of white wash on wall etc complete all as specified and as directed. |
| 125 | Material and labour for preparation of old decorative surface of ceilings etc by washing rubbing down etc and applying one coat of oil emulsion paint complete all as specified and directed. |
| 126 | Material andlabour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 127 | Material andlabour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 128 | Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed. |
| 129 | Supply andfixing of rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and directed |
| 130 | Supply andfixing of mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachmentconforming to Fe-410-W(Gde-E-250) quality-B complete all as specified and directed. |
| 131 | Supply and fixing of mild steel screw bolts (machine made) dia of neck11 to 15mm with hexagonal or square head at one end and screwed the other head or screwed both end, each screw end to fitted with 3mm thick MS washers and one hexagonal or square nuts, length ofbolt exc 5cm but n"exc 10 cm long complete all directed. |
| 132 | Supply andfixing of pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa tensile strength as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc complete including dismantling asbestos cement corrugated or semi-corrugated sheets etc; complete all as specified and as directed. |
| 133 | Supply andfixing of pre-painted galvalume aluminium zinc coating GI based galvanised plain mild steel sheeting 0.50 mm thick of any colour, having 550 Mpa tensile strength as in roof covering/ ridges and fixed with self tapping screws or J type hooks including rubber washer etc complete including dismantling asbestos cement corrugated or semi-corrugated sheets etc; complete all as specified and as directed. |
| 134 | Material andlabour for external textured painting, removal of existing treatment on surfaces of walls, chajjas etc and efflorescent salts and treating oil and greasy spots washing down with water and freeing the surfaces from all loose dirt,etcto match the existing painted surface including necessary scaffoldings, complete all as specified and directed. |
| 135 | Material andlabour for high performance polymer modified cementitious coating for water proofing of wet areas and any other water retaining structure. Notes: 1. Mix ratio of liquid : powder (by weight) 1:1.4 2. Inner coat application time is 2 Hrs and cure time after second coat is 7 days. 3. Chemical applied for 2 coats @ 0.5 - 0.55 Square meter per Kg. 4. Water proofing will be executed by manufacture or authorized applicator only of the selected / approved company. Contractor shall submit details of authorised applicator for approval of GE before commencement of work in respect of above item. |
| 136 | NOTE:- Amount of credit ofRs. 1,08,775.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
